AEG 18 Volt Drill
SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTIONSkylarc Ref P146288
Model: AEG A18PDB 18 volt drill
4ah battery
BL1218 charger
Case
Sold Price
$124
Auction Ended: Sunday, 13 August 2023
Showing 121–180 of 212 products
Skylarc Ref P146288
Model: AEG A18PDB 18 volt drill
4ah battery
BL1218 charger
Case
Sold Price
$124
Skylarc Ref U145695
Vintage Steel Topped Wooden Workbench w/ Vice.
1mm thick steel sheet top surface approx 915mm above floor.
Thick.wood frame
460mm high back MDF wall with sides.
Two lower drawers.
Unknown brand vice with 155mm wide jaws.
Workbench shows heavy usage and wear but seems sturdy.
Sold Price
$123
Skylarc Ref L146284
25 total
Mainly 3" and 4"
Sold Price
$122.02
Skylarc Ref R145692
Storm Air Die Grinder.
Unknown model number.
Untested. Shaft spins freely.
Sold Price
$117
Skylarc Ref U146293
Topmaq brand
20 ton bottle jacks
Sold Price
$116
Skylarc Ref F145680
Cogsdill-Nuneaton Recessing Head.
Model.no.ST1-TRB.
Sold Price
$113
Skylarc Ref U145019
Industrial Press.
Made in Australia by John Heine & Son Ltd.
Model 55a
3-phase
Unknown capacity but thought to be approx 30 ton
Sold Price
$112
Skylarc Ref J145684
Assorted Bulk Screws, Bolts, Nuts.
Metric and Imperial sizes, see photos.
Leftover unused workshop parts stock.
Sold Price
$111
Skylarc Ref H145006
4x Trailer Adjustable Support Stands.
Adjustable length from approx 420mm to approx 620mm.
Mounting bolt hole spacing approx 200mm apart.
Sold Price
$111
Skylarc Ref V145696
Assorted Grease Nipples.
Various sizes in non-original cases.
Sold Price
$110
Skylarc Ref M145063
3x Air Die Grinders w/ Attached hoses.
All Grinders are ToolShed branded. Two units are Model TSA22, one is model.TSA30.
All have airlines attached.
3x tip Wrenches plus 2x extra tip attachments included.
Sold Price
$110
Skylarc Ref Y145699
Assorted Compression & Extension Springs.
See photos for included types, brands.
Cases show workshop storage wear.
Sold Price
$108.50
Skylarc Ref X145048
Vintage Narex Branded Tap & Die Set in Bakelite Case.
Case measures approx 430x230x45mm.
See photos for included components.
Age of set is unknown.
Sold Price
$107
Skylarc Ref O145013
4x Large Diameter Milling Face Cutters + Wood Case of Other Large Milling Accessories.
Unable to find ledgible ID markings with all the rust on the mill face Cutters. Diameter of each are approx 400mm, 350mm, 290mm, and 180mm.
Wood case measures approx 815x520x190mm.
See photos for details on contents within the Case.
Sold Price
$107
Skylarc Ref V145020
Downpipe edge roller
Capacity up to 2480mm.
Sold Price
$105
Skylarc Ref W146269
Tool cabinet with plastic drawers
Large drawer at bottom
Contents of tooling accessories
Sold Price
$103
Skylarc Ref I145683
32x Assorted Thread Dies.
Outside diameters range from 32mm to 165mm.
Condition varies with each unit
Sold Price
$102
Skylarc Ref P146262
Model: Moore and Wright 941X
0 - 4"
In case
Sold Price
$102
Skylarc Ref N146286
19 cutters total
Largest size 25mm
Sold Price
$101
Skylarc Ref Z145050
Vintage Wooden Workbench w/ Vice.
1mm thick steel sheet over wood board work surface which is approx 915mm above floor.
455mm high MDF back wall board.
Lower wooden drawers.
Swordfish branded vice with 150mm wide jaws.
Well used but sturdy Workbench.
Sold Price
$101
Skylarc Ref U145045
Hitachi Corded 3/4" Drive Impact Wrench.
Model No. WR22SA.
Some damage to cord, see photos.
Sold Price
$101
Skylarc Ref H146280
Capital style pallet racking
On wheels
4 levels
Contents not included
Skylarc Ref O145039
4-Jaw Lathe Chuck,.
Unknown manufacturer.
310mm outside Diameter.
90mm diameter centre hole.
15mm mounting bolt size (bolts not included) spaced approx 110mm apart on centre.
Chuck Jaw adjustment key is missing.
Sold Price
$100
Skylarc Ref D145080
Assorted part packs of welding wire and electrodes
Sold Price
$96
Skylarc Ref G145005
Eriez Magnetics Hi-Vi Vibratory Equipment.
Model No. HS20.
Style No. 20
Single Phase
Shows some modification.
Sold Price
$96
Skylarc Ref Q145691
Set of 5mm Steel Letter and Number Stamps.
Made in England by Eclipse.
70mm lengths.
5mm size letter and numbers.
Sold Price
$93
Skylarc Ref X145698
3x Cases of Circlips, Assorted Sizes.
Cases show workshop storage wear.
Sold Price
$92.40
Skylarc Ref W145073
Pair of Steel Saw Horses.
38x20mm solid steel top bar.
40x40mm angle steel legs.
Sturdy units.
Sold Price
$86
Skylarc Ref W145047
Precision Pressure Test Gauge by Ashcroft.
Made in USA.
0.1 psi subd
Accuracy grade 3A, 0.25%
190mm diameter.
Includes custom made steel case.
Sold Price
$86
Skylarc Ref P145066
2x 300mm G-Clamps.
Each is a different design with different length of threaded bar, see photos.
Sold Price
$85
Skylarc Ref O145663
Vintage Moore & Wright Imperial Scale Micrometer.
Model No.996
3" to 4" range.
Micrometer very good condition. Wood case exterior shows wear.
Sold Price
$85
Skylarc Ref O145897
Ozark Six Shooter Stud Welder.
Part No.017063
Welder measures approx 640x310x310mm.
Max stud diameter 3/8" (9.5mm)
Includes assorted cabling and wood case.
Sold Price
$84
Skylarc Ref W145697
5x Cases of Assorted Roll and Cotter Pins.
Four cases of Assorted Sizes of roll pins.
One case of Assorted Cotter Pins.
Cases show workshop storage wear and damage.
Sold Price
$81
Skylarc Ref S145069
AmPro Air Chisel.
Unable to read model number on worn ID label.
Sold Price
$81
Skylarc Ref F146278
2 x 230mm x 47mm x 15mm (one slightly longer than the other)
4 x 170 x 50mm x 23mm (all slightly different lengths)
Sold Price
$80
Skylarc Ref B145052
Makita Corded Hammer Drill.
Model No.HP2010N
13mm Keyed Chuck with key.
Removable side handle.
Sold Price
$80
Skylarc Ref E145653
Assorted Vintage Thread Dies.
Outer diameters up to 70mm.
Very dirty units, many with surface rust as well.
Sold Price
$79.50
Skylarc Ref T145070
Record No.4 Benchtop Vice.
120mm wide plastic jaws installed.
Sold Price
$79
Skylarc Ref V146294
11 blades total
Assorted sizes
Sold Price
$78.50
Skylarc Ref L145660
Vintage Brass "Mammoth" Heavy Duty Heating Torch.
Made in NZ by New Zealand Industrial Gases Limited.
Main Torch body approx 1065mm in length.
Wood case 1135x140x70mm.
Torch in very good condition. Case exterior in average condition showing workshop storage wear.
Sold Price
$75.75
Skylarc Ref Z145700
Assorted Nitrile O-Rings, w/ Splicing Kit + Rubber Grommetts.
2x Gmors O-Ring Nitrile 70 Duro kits, one Imperail and one metric Sizes.
Loctite O-Ring splicing kit.
Assorted Sizes of rubber grommets.
Cases show workshop storage wear.
Sold Price
$74
Skylarc Ref G146279
Mig welding gun
Gouging torch
Negative electrode
Sold Price
$73
Skylarc Ref I146281
Model: Warren and Brown 8620B
In box
Sold Price
$67.50
Skylarc Ref G145057
Hikoki Corded 125mm Angle Grinder.
Model No. G13SB3.
Disk Wrench is missing.
Cord is damaged, see photos.
Sold Price
$62.12
Skylarc Ref S146291
Model: Clarkson No 30 INT Type S
NT 30 spindle taper
Fitted with threading tool
Assortment of collets
Wrench
Case
Sold Price
$57
Skylarc Ref Y145673
Coventry Diehead Thread Cutter.
Unknown manufacturer.
1½"" BSP hand marked on exterior of unit. Approx 67mm diameter, 50mm depth inner (excluding teeth) when measured with tape measure.
Sold Price
$56.51
Skylarc Ref I145059
Assorted Sizes / Types of Grinding, Cut-off & Sanding Disks.
Diameters of 125mm, 180mm, 230mm and 400mm.
Wide range of Types and brands.
Most appear unused. Some may show usage.
Sold Price
$56
Skylarc Ref D145028
Lockformer
Unknown manufacturer and model
Single phase
Sold Price
$56
Skylarc Ref T145044
Vintage Hitachi Vorded Belt Sander.
Model No. SB-110.
110x620mm belt size.
Some damage to cord, see photos.
Operates but shows heavy wear and usage.
No dust catcher bag.
Sold Price
$51.50
Skylarc Ref T145694
Vintage Steel Topped Wooden Workbench w/ Vice.
1mm thick steel top surface sheet approx 905mm above floor.
Thick wood frame.
450mm high back MDF wall with small shelves and plug-in adjustable light (light is functioning).
English made vice with 155mm wide jaws.
Two lower drawers.
Item shows heavy wear and usage but seems sturdy.
Sold Price
$51
Skylarc Ref X145672
Coventry Diehead Thread Cutter.
Unknown manufacturer.
1¼"" BSP hand marked on exterior of unit. Approx 67mm diameter, 50mm depth inner (excluding teeth) when measured with tape measure.
Sold Price
$51
Skylarc Ref V145072
Large Thread Tap w/ Mounting Attachment.
Unknown manufacturer and model as no ID markings are visible.
Hand measured to be approx 86mm diameter, 65mm long thread cutting head.
Mounting shank 38mm diameter.
Thread Tap excellent condition. Mounting attachment good condition showing moderate wear.
Sold Price
$51
Skylarc Ref O145065
Assorted G-Clamps and F-Clamps.
Four G-clamps in sizes of 2x 200mm, 2x 100mm.
2x F-clamps with lengths of approx 250mm and 180mm.
All G-clamps have bent threaded rods most missing end caps.
Sold Price
$51
Skylarc Ref N146260
Model: Flam 192313160
High speed screw feeder system
Single phase
Sold Price
$49
Skylarc Ref A145675
Coventry Diehead Thread Cutter.
Unknown manufacturer.
1" BSPT hand marked on exterior of unit. Approx 40mm diameter inner (excluding teeth) when measured with tape measure.
Sold Price
$47
Skylarc Ref G145655
Mobile Steel Workshop Drill Bit Rack & Cabinet.
Heavy Steel construction.
Assorted Drill Bit Racks welded to top.
Well used but strong unit.
Sold Price
$47
Skylarc Ref T145668
Coventry Diehead Thread Cutter.
Made in England by Alfred Herbert Ltd
1" marked on exterior of unit.
38mm diameter mounting shank
Sold Price
$46
Skylarc Ref O146261
I&J Fisnar INC
Single phase
Sold Price
$45
Skylarc Ref S145667
Coventry Diehead Thread Cutter.
Unknown manufacturer.
Hand written ¾" BSP on exterior.
28mm diameter hand measured inner hole.
38mm diameter mounting shank.
Sold Price
$44.90
Skylarc Ref K145659
Grinding Wheel Radius Attachment Set.
Unknown manufacturer.
A x B = 5.25 x 32.09
Wood case 325x210x45mm.
Sold Price
$42.87