← Back to Auctions

Skylarc's Gore Engineering Auction

Engineering Plant and Machinery Auction

Auction Ended: Sunday, 5 May 2024

Showing 301–333 of 333 products

5x Metabo Corded Angle Grinders, all Faulty Sold Trade Me

Sold on: 5 May 2024

5x Metabo Corded Angle Grinders, all Faulty

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref N154057

5x Metabo Corded Angle Grinders.
Includes the following:
- Metabo W72100, 100mm Grinder, will not operate, cause unknown.
- Metabo 125mm Grinder (worn ID label), will not operate, cause unknown.
- 2x units of Metabo WQ1000 125mm Grinder, both with damaged power cord, unsafe to operate.
- Metabo W 11-125 Quick Grinder, Also very damaged power cord, unsafe to operate.

The three units with severely danged cords have not been tested for safety reasons. One is missing disk guard.

Sold Price

$51

View Listing
Single Heavy Duty Steel Sawhorse Sold Trade Me

Sold on: 5 May 2024

Single Heavy Duty Steel Sawhorse

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref N154083

Single Heavy Duty Steel Sawhorse.
Made from 65x65mm box steel lengths.
Sturdy well built unit.

Sold Price

$51

View Listing
Assorted Large Diameter Rubber Pipe Gaskets Sold Trade Me

Sold on: 5 May 2024

Assorted Large Diameter Rubber Pipe Gaskets

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref P154501

Assorted Large Diameter Rubber Pipe Gaskets.
Inner diameters range from 45mm to 300mm.
Leftover unused workshop supply stock. Dusty from open storage.
Approx 58x Gaskets in total.

Sold Price

$49

View Listing
Take Up Cast Iron Housings Sold Trade Me

Sold on: 5 May 2024

Take Up Cast Iron Housings

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref U154272

TU 506 M
Take-up cast iron housings are non-split housings made of grey cast iron and are designed to provide a high degree of stiffness and accommodate heavy loads acting in different directions. These types of loads are typically encountered in conveyors, roller beds and crushers.
Spherical seating diameter: 62 mm
Housing overall width: 37 mm

Sold Price

$47.60

View Listing
Festo ISO Cylinder Sold Trade Me

Sold on: 5 May 2024

Festo ISO Cylinder

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref O154266

FESTO ISO Cylinder
DNC-50-500-PPV-A
p max. 12 bar

for more information please visit
https://www.festo.com/us/en/a/163380/?autoShowCad=true

Sold Price

$47.40

View Listing
BHW-1200 Pacific Hand Winch Sold Trade Me

Sold on: 5 May 2024

BHW-1200 Pacific Hand Winch

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref D154281

Pulling Capacity: 545kg
Lifting Capacity: 270kg
Hand Force Required: 15kg
Standard Finish: Powder-coated
Gear Ratio: 4.1:1
Hub Diameter: 50mm
Cable Diameter: 4.8mm
Net Weight: 3.3kg

Sold Price

$47

View Listing
8x Assorted SDS Plus Rotary Hammer Bits Sold Trade Me

Sold on: 5 May 2024

8x Assorted SDS Plus Rotary Hammer Bits

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref I154052

8x Assorted SDS Plus Rotary Hammer Bits.
Includes:
26x400mm with Metabo case.
16x500mm.
16x250mm
22x400mm
18x400mm
14x400mm
10x200mm
8x100mm.
Condition varies greatly with each unit,, see photos.

Sold Price

$43

View Listing
2 x Reid Rebrace-12 Set Sold Trade Me

Sold on: 5 May 2024

2 x Reid Rebrace-12 Set

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref C154618

ReidBrace is an off-the-shelf system that provides design engineers and constructors with an economic solution for tension bracing of structures, tie-back applications and temporary works bracing. ReidBrace are supplied as kits. Each Kit contains: 1. Reid Tension Spring, 2. Reid Tab Washer, 3. RBRACE, 4. RBRACE-END, 5. ReidBar Nut x 2, 6. Pin and Clip. ReidBrace utilises ReidBar, a user friendly continuously threaded reinforcing bar system, as tension members. This makes ReidBrace a unique system that is easy to install with minimum extra processes onsite

Sold Price

$41

View Listing
2x Metabo Corded Drills Sold Trade Me

Sold on: 5 May 2024

2x Metabo Corded Drills

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref J154053

2x Metabo Corded Drills.
Includes:
Metabo SBE 750 Hammer Drill with Keyless 13mm Chuck. Non-originsl.power cord attached.
Metabo Drill with Keyed 13mm Chuck, key is included. ID labels are missing so model number is unknown.
Both Drill show heavy wear and usage. Both operate but not tested at length or under load.

Sold Price

$41

View Listing
Shelf & Contents Sold Trade Me

Sold on: 5 May 2024

Shelf & Contents

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref D154671

Whole Shelf and Contents.

Sold Price

$41

View Listing
BHW-1200 Pacific Hand Winch Sold Trade Me

Sold on: 5 May 2024

BHW-1200 Pacific Hand Winch

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref E154282

Pulling Capacity: 545kg
Lifting Capacity: 270kg
Hand Force Required: 15kg
Standard Finish: Powder-coated
Gear Ratio: 4.1:1
Hub Diameter: 50mm
Cable Diameter: 4.8mm
Net Weight: 3.3kg

Sold Price

$40.20

View Listing
Makita Corded 235mm Circular Saw 5900-B Sold Trade Me

Sold on: 5 May 2024

Makita Corded 235mm Circular Saw 5900-B

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref P154059

Makita Corded 235mm Circular Saw.
Model No.5900-B.
Older model showing heavy usage and wear. Operates but motor sounds well used. Not tested at length or under load.

Sold Price

$37

View Listing
Vintage Threading Die Set in Wood Case Sold Trade Me

Sold on: 5 May 2024

Vintage Threading Die Set in Wood Case

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref R154295

Vintage Threading Die Set in Wood Case.
Unable to find any manufacturer markings on any of the pieces of the set. Many pieces are very dirty and nay have markings under all the surface grime.
Wood case approx 690x190x50mm.
Many pieces are missing, see photos. Case hinge is damaged and detached.

Sold Price

$37

View Listing
Milwaukee 28V Cordless 1/2" Drive Impact Wrench, Faulty Sold Trade Me

Sold on: 5 May 2024

Milwaukee 28V Cordless 1/2" Drive Impact Wrench, Faulty

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref Z154017

Milwaukee 28V Cordless 1/2" Drive Impact Wrench.
Model No. 0779-20
Includes 28V, 3.0Ah Li-Ion Battery model 48-11-2830.
Includes charger model V 1828 C
Includes case.
Condition - Wrench shows heavy wear and usage. Connection terminal at base of handle is broken partly off, see photos. Battery will not charge on charger. Wrench operation condition unknown.

Sold Price

$36

View Listing
Large Steel Sawhorse Sold Trade Me

Sold on: 5 May 2024

Large Steel Sawhorse

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref F154075

Large Steel Sawhorse.
Single unit.
Top bar is 50x50mm box steel.
40mm diameter tube steel legs.
Sturdy well built unit

Sold Price

$35

View Listing
Nomad Power Centre Sold Trade Me

Sold on: 5 May 2024

Nomad Power Centre

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref A154252

Nomad Power Center
1 x Three phase inlet
6 x Single phase outlets
1 x 2 phase outlet

Sold Price

$32

View Listing
Heavy Steel Workshop Stotqge Shelf Sold Trade Me

Sold on: 5 May 2024

Heavy Steel Workshop Stotqge Shelf

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref R154503

Heavy Steel Workshop Stotqge Shelf.
Custom made from 6mm Steel Plate prices welded together.
125mm.width in each shelf.
Vertical gap between shelves approx 240mm.
Strong sturdy unit.

Sold Price

$28

View Listing
3 x ABDC Compressors Sold Trade Me

Sold on: 5 May 2024

3 x ABDC Compressors

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref N154681

ABDC labelled compressors
Unknown application
Each 350mm long x 240mm wide x 340mm tall

Sold Price

$27

View Listing
Workshop Materials Storage Rack Sold Trade Me

Sold on: 5 May 2024

Workshop Materials Storage Rack

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref O154500

Workshop Materials Storage Rack.
150mm to 240mm long sterl rods fir hanging various materials, belts, Gaskets, etc.
Multi Purpose sturdy unit.
See photos for further design details.

Sold Price

$24.50

View Listing
Starret Welded Bandsaw Blade Sold Trade Me

Sold on: 5 May 2024

Starret Welded Bandsaw Blade

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref G154258

Starret Welded Bandsaw Blade
W-PB42
3810 x 27 x 6-10TPI

Sold Price

$21

View Listing
Starret Welded Bandsaw Blade Sold Trade Me

Sold on: 5 May 2024

Starret Welded Bandsaw Blade

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref H154259

Starret Welded Bandsaw Blade
W-PB42
3810 x 27 x 6-10TPI

Sold Price

$21

View Listing
Starret Welded Bandsaw Blade Sold Trade Me

Sold on: 5 May 2024

Starret Welded Bandsaw Blade

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref I154260

Starret Welded Bandsaw Blade
W-PB42
3810 x 27 x 6-10TPI

Sold Price

$21

View Listing
Assorted Bolts Sold Trade Me

Sold on: 5 May 2024

Assorted Bolts

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref Z154693

Assorted Bolts.
Small cardboard box with M6x25mm bolts.
Galvanized 405x210x100mm box with various bolts up to M12 size.
Number of bolts unknown.
Most appear to be unused. Dusty from storage

Sold Price

$20.60

View Listing
Hitachi Corded Drill D10VC2 Sold Trade Me

Sold on: 5 May 2024

Hitachi Corded Drill D10VC2

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref T154011

Hitachi Corded Drill.
Model No. D10VC2
10mm Keyed Chuck, key included.
Includes plastic case.
Drill operates but motor sounds rough. Not tested at length or under load.

Sold Price

$16.50

View Listing
Hitachi Corded Tek Screw Gun W6VB3 Sold Trade Me

Sold on: 5 May 2024

Hitachi Corded Tek Screw Gun W6VB3

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref U154012

Hitachi Corded Tek Screw Gun.
Model No. W6VB3
Includes case.
Operates but shows heavy usage and wear.

Sold Price

$12.50

View Listing
Automotive Towbar Assembly Sold Trade Me

Sold on: 5 May 2024

Automotive Towbar Assembly

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref C154514

Automotive Towbar Assembly.
Main frame is 75x75mm box steel with 10mm thick plate steel side mounting plates.
Total assembly width approx 725mm. Side plate height are approx 295mm and 200mm wide. Mounting holes are spaced approx 150x60mm apart on centre.
180mm long steel bar length with 48mm diameter tow ball attached.
See photos for further design details.
Unknown what make/models of vehicles this is compatible wirh.

Sold Price

$12

View Listing
3-Phase Motor Sold Trade Me

Sold on: 5 May 2024

3-Phase Motor

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref Y154250

3-Phase Motor
Kw: 3
V: 240/415
A: 14/7
Hz: 50
r/min: 2800
IP: 44

Sold Price

$11.50

View Listing
Hydraulic Mount Assembly Sold Trade Me

Sold on: 5 May 2024

Hydraulic Mount Assembly

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref S154270

RPA100 Hydraulic Mount Assmbly
Hub is 150mm with 10 20mm bolt holes.
base is 180mm x 360mm x 10mm

Sold Price

$10.50

View Listing
Starret Welded Bandsaw Blade Sold Trade Me

Sold on: 5 May 2024

Starret Welded Bandsaw Blade

SKYLARC’S GORE ENGINEERING AUCTION

Skylarc Ref F154257

Starret Welded Bandsaw Blade
W-PB42
3810 x 27 x 6-10TPI

Sold Price

$4.50

View Listing
Show 60 240 All per page