Flood Light
SKYLARC'S GENERAL PLANT AND MACHINERY AUCTIONSkylarc Ref R158299
Phillips IP 65 rated flood light
Sold Price
$25.50
Showing 541–600 of 735 products
Skylarc Ref R158299
Phillips IP 65 rated flood light
Sold Price
$25.50
Skylarc Ref V159343
10 Thread Chasers
Sizes are seen in Photos
Sold Price
$25.50
Skylarc Ref A158230
3 boxes of 10
Sold Price
$25
Skylarc Ref H156781
Constructed from Heavy Duty Steel plate
Sold Price
$25
Skylarc Ref T159341
10 Thread Chasers
Sizes are seen in Photos
Sold Price
$24.50
Skylarc Ref M158476
Model Galaxy J5 SM-J500Y
8gb
NO CHARGER OR CABKES
Sold Price
$24.50
Skylarc Ref U158406
Lot of assorted drilling accessories
refer to images for more information
Sold Price
$24
Skylarc Ref G158288
Lathe Tool Post.
Measures approx 100x100mm square and 75mm high (excluding top bolts).
top and bottom plate are 20mm with a gap of 35mm between.
Tool Holding Bolts are 90mm tall and 10mm wide at the head.
Photos are Indicative. all items are the same quality.
Sold Price
$24
Skylarc Ref D156543
3 x BT-50 Tool Holders
Sold Price
$24
Skylarc Ref U159576
Premium model
Sold Price
$24
Skylarc Ref I159564
Unknown if any leaks
Sold Price
$24
Skylarc Ref G158236
Approx 1200mm long
Sold Price
$23.50
Skylarc Ref U157158
Item is dusty on outside due to warehouse storage
Optimised multi-cutter (4 or 6-cutter) carbide head – superior drilling performance and less jamming when hitting rebar
Heat-treated flute offers superior wear resistance and maximum robustness, with a wear mark to estimate the bit's suitability for setting anchors
Slimmer and lighter helix for more comfortable drilling and superior drilling speed
Fully embedded drill bit head for maximum durability and longer Lufe
Sold Price
$23
Skylarc Ref N158269
Lathe Tool Post.
Measures approx 110x110mm square and 85mm high (excluding top bolts).
top and bottom plate are 20mm with a gap of 40mm between.
Photos are Indicative. all items are the same quality.
Sold Price
$23
Skylarc Ref C158284
Lathe Tool Post.
Measures approx 110x110mm square and 85mm high (excluding top bolts).
top and bottom plate are 20mm with a gap of 40mm between.
Photos are Indicative. all items are the same quality.
Sold Price
$23
Skylarc Ref N157047
2x Uretek worldwide hammer drill bits for concrete and masonry.
12mm diameter
920mm length
Sold Price
$23
Skylarc Ref P156555
Threading dies
A large lot of assorted various sizes threading dies
check photos for more information
Sold Price
$23
Skylarc Ref K158266
Lathe Tool Post.
Measures approx 150x150mm square and 100mm high (excluding top bolts).
top and bottom plate are 25mm with a gap of 50mm between.
Photos are Indicative. all items are the same quality.
Sold Price
$22.50
Skylarc Ref Q157154
Item is dusty on outside due to warehouse storage
Optimised multi-cutter (4 or 6-cutter) carbide head – superior drilling performance and less jamming when hitting rebar
Heat-treated flute offers superior wear resistance and maximum robustness, with a wear mark to estimate the bit's suitability for setting anchors
Slimmer and lighter helix for more comfortable drilling and superior drilling speed
Fully embedded drill bit head for maximum durability and longer Lufe
Sold Price
$22
Skylarc Ref O157152
Item is dusty on outside due to warehouse storage
Optimised multi-cutter (4 or 6-cutter) carbide head – superior drilling performance and less jamming when hitting rebar
Heat-treated flute offers superior wear resistance and maximum robustness, with a wear mark to estimate the bit's suitability for setting anchors
Slimmer and lighter helix for more comfortable drilling and superior drilling speed
Fully embedded drill bit head for maximum durability and longer Lufe
Sold Price
$22
Skylarc Ref M157150
Item is dusty on outside due to warehouse storage
Optimised multi-cutter (4 or 6-cutter) carbide head – superior drilling performance and less jamming when hitting rebar
Heat-treated flute offers superior wear resistance and maximum robustness, with a wear mark to estimate the bit's suitability for setting anchors
Slimmer and lighter helix for more comfortable drilling and superior drilling speed
Fully embedded drill bit head for maximum durability and longer Lufe
Sold Price
$22
Skylarc Ref Q158428
Redman UniTool Metal Press Punch.
Model No. 12" 300+ 350+
Sold Price
$22
Skylarc Ref P158271
Lathe Tool Post.
Measures approx 125x125mm square and 90mm high (excluding top bolts).
top and bottom plate are 20mm approx with a gap of 40mm between.
Photos are Indicative. all items are the same quality.
Sold Price
$22
Skylarc Ref R158273
Lathe Tool Post.
Measures approx 125x125mm square and 90mm high (excluding top bolts).
top and bottom plate are 20mm approx with a gap of 40mm between.
Photos are Indicative. all items are the same quality.
Sold Price
$22
Skylarc Ref U158276
Lathe Tool Post.
Measures approx 125x125mm square and 90mm high (excluding top bolts).
top and bottom plate are 20mm approx with a gap of 40mm between.
Photos are Indicative. all items are the same quality.
Sold Price
$22
Skylarc Ref C157062
2x Uretek worldwide hammer drill bits for concrete and masonry.
12mm diameter
920mm length
Sold Price
$22
Skylarc Ref W156562
Threading dies
4 x Teledyne landies 18 NPT 20degree (2×BN5, 2XCN5 Tapered)
3 x Tangebtial 18 NPT 30degree
2 x Landies UN 11.5
2 x Landies BSF 24
1 x unknown
check photos for more information
Sold Price
$22
Skylarc Ref R156557
Threading dies
A large lot of assorted various sizes threading dies
check photos for more information
Sold Price
$22
Skylarc Ref O156554
Threading dies
8x Tangential type dies
thread 11 TPI WHIT
throat 15degree
check photos for more information
Sold Price
$22
Skylarc Ref M159334
6x NT Tool Holders and collect set
check photos for more information
Sold Price
$22
Skylarc Ref S159574
250w Philips bulb
Sold Price
$22
Skylarc Ref K159566
Each approx 890mm high X 350mm wide X 300mm deep
Been wet so surface rusty
Sold Price
$22
Skylarc Ref T157079
Lathe Tool Post.
Measures approx 150x150mm square and 100mm high (excluding top bolts).
top and bottom plate are 25mm with a gap of 50mm between.
Tool Holding Bolts are 100mm tall and 12mm wide at the head.
Photos are Indicative. all items are the same quality.
Sold Price
$21.50
Skylarc Ref H158471
6 Drawers
No key
Lockable Casters
Sold Price
$21.50
Skylarc Ref Y158280
Lathe Tool Post.
Measures approx 110x110mm square and 85mm high (excluding top bolts).
top and bottom plate are 20mm with a gap of 40mm between.
Photos are Indicative. all items are the same quality.
Sold Price
$21.50
Skylarc Ref Y141897
L-Com Hyperlink Omnidirectional 800/900Mhz Antenna.
Model No.HGV-906U
6 dB
570mm long.
Includes mounting bracket and box.
New unused unit. Box shows some damage.
See our other listings for more of these units.
See the weblink below for further item specs:
https://www.l-com.com/wireless-antenna-800-900-mhz-6-dbi-omnidirectional-antenna
Sold Price
$21
Skylarc Ref K157148
Item is dusty on outside due to warehouse storage
Optimised multi-cutter (4 or 6-cutter) carbide head – superior drilling performance and less jamming when hitting rebar
Heat-treated flute offers superior wear resistance and maximum robustness, with a wear mark to estimate the bit's suitability for setting anchors
Slimmer and lighter helix for more comfortable drilling and superior drilling speed
Fully embedded drill bit head for maximum durability and longer Lufe
Sold Price
$21
Skylarc Ref Z158281
Lathe Tool Post.
Measures approx 110x110mm square and 85mm high (excluding top bolts).
top and bottom plate are 20mm with a gap of 40mm between.
Photos are Indicative. all items are the same quality.
Sold Price
$21
Skylarc Ref L158293
Lathe Tool Post.
Measures approx 130x130mm square and 75mm high (excluding top bolts).
top and bottom plate are 20mm with a gap of 30mm between.
Photos are Indicative. all items are the same quality.
Sold Price
$21
Skylarc Ref X158487
Height Adjustable
Black leather like fabric ( likely synthetic)
Sold Price
$21
Skylarc Ref V156587
Uretek worldwide hammer drill bit for concrete and masonry.
38mm diameter
1320mm length
Sold Price
$21
Skylarc Ref H156547
Threading dies
A large lot of assorted various sizes threading dies
check photos for more information
Sold Price
$21
Skylarc Ref R159365
4 Grease guns
Sold Price
$21
Skylarc Ref W159552
Model BD680-015G/018P-4 ZS
Sold Price
$21
Skylarc Ref N157853
Connection end: TE-Y (SDS-max)
Base material: Reinforced concrete, Concrete
Working mode: Hammer drilling
16mm diameter
1190mm length
Some surface rust
Sold Price
$20.50
Skylarc Ref P156581
Tool box 55mmx22mmx22mm
Check photos for more information
Sold Price
$20
Skylarc Ref D159325
Hydraulic Valve Block Assembly
Sold Price
$20
Skylarc Ref K159306
Pallet of metal Brackets, Hubs and Legs
8 x legs
6 x Large Brackets
2 x Smaller Brackets
3 x Hubs
Sold Price
$20
Skylarc Ref I155846
Crate of Drive Belts and Pulley Housings includes:
4 x 3 port Pulley Housings
2 x 2 port Pulley Housings
12 x Drive Belts
1 roll of Magnetic Strip
other peices see photos for details
Sold Price
$19.50
Skylarc Ref A158282
Lathe Tool Post.
Measures approx 110x110mm square and 85mm high (excluding top bolts).
top and bottom plate are 20mm with a gap of 40mm between.
Photos are Indicative. all items are the same quality.
Sold Price
$19.50
Skylarc Ref Q157050
2x Uretek worldwide hammer drill bits for concrete and masonry.
12mm diameter
920mm length
Sold Price
$19.50
Skylarc Ref W159344
10 Thread Chasers
Sizes are seen in Photos
Sold Price
$19.30
Skylarc Ref D159377
2 Osram L18W/67 blue bulbs
Sold Price
$17.50
Skylarc Ref L157851
Connection end: TE-Y (SDS-max)
Base material: Reinforced concrete, Concrete
Working mode: Hammer drilling
16mm diameter
1190mm length
Some surface rust
Sold Price
$17
Skylarc Ref M158450
A bucket of various size of nuts,bolts and 20mm Square washers
Sold Price
$17
Skylarc Ref L157149
Item is dusty on outside due to warehouse storage
Optimised multi-cutter (4 or 6-cutter) carbide head – superior drilling performance and less jamming when hitting rebar
Heat-treated flute offers superior wear resistance and maximum robustness, with a wear mark to estimate the bit's suitability for setting anchors
Slimmer and lighter helix for more comfortable drilling and superior drilling speed
Fully embedded drill bit head for maximum durability and longer Lufe
Sold Price
$16.50
Skylarc Ref H158263
Lathe Tool Post.
Measures approx 150x150mm square and 110mm high (excluding top bolts).
top and bottom plate are 25mm with a gap of 55mm between.
Tool Holding Bolts are 100mm tall and 12mm wide at the head.
Photos are Indicative. all items are the same quality.
Sold Price
$16.50
Skylarc Ref B158283
Lathe Tool Post.
Measures approx 110x110mm square and 85mm high (excluding top bolts).
top and bottom plate are 20mm with a gap of 40mm between.
Photos are Indicative. all items are the same quality.
Sold Price
$16.50
Skylarc Ref G156780
Original Flex Corded Reciprocating Saw.
1200W.
Includes steel case.
Well used, operates but not tested at length or under load. Motor has strong smell when used.
Unknown if Kit is complete.
Sold Price
$16
Skylarc Ref R159339
13 Thread Chasers
Sizes are seen in Photos
Sold Price
$16