TJI Engineering Closure Auction

Yawei 6 Metre 300 Ton CNC Press Brake

Skylarc Ref J200009

Model: Yawei CNC Pressbrake PBB-300/6200
Max force 3000kN
Max bending length 6200mm
3 phase (no plug)
Delem DA-52s CNC controller
Light guards
Full length V block
Wide range of tooling on trolley
Manufactured 2014
Currently mounted above ground on concrete and steel stands
Ultimate boat builders machine

Linde 12 Ton Diesel Forklift

Skylarc Ref X176159

Model: Linde AG H120
12000kg lift capacity
3.6 metre 2 stage mast
2.5 metre wide carriage
2400mm long forks
4500mm max lift height
Hydraulic fork adjust
Perkins 6 cylinder diesel engine
Manufactured 2001
15311 hours on clock
ROPs cab
Starts easy and runs well
Pickup for this machine will be by arrangement week of the 31st August

Luxcut 4 Metre Guillotine

Skylarc Ref I200086

Model: Luxcut GHS4000NCX6
4000mm cutting width
6mm capacity
Estun NC controller
Hydraulic
Foot controller
Light guards
Manufactured 2017
Tidy big capacity machine ready for work

Lonking 7 Ton Diesel Forklift

Skylarc Ref W176158

Model: Lonking LG70DT
7 ton max lift capacity
Mast model M4000
Max lift height 4 metres
2400mm wide carriage
2350mm long forks
FAWDE 6 cylinder diesel engine
186 hours on clock
Manufactured 2023
2 forward and 2 reverse speeds
Side shift
Hydraulic fork adjust
Exceptionally tidy low hour late model machine
Collection for this machine will be the will of the 31st of August by arrangement

Pearson Metal Cutting Guillotine

Skylarc Ref Y200024

Pearson 3 metre hydraulic guillotine
3048mm cutting width
13mm capacity (.5")
Three phase 32 amp plug
Electric back gauge
Hold downs
Nitrogen return system with pressure monitoring gauge
Heavy duty big capacity machine ready to go

400 Ton 4 Metre Hydraulic Press Brake

Skylarc Ref H200631

Model: Jiangsu Yangli WC67Y-400/4000 Hydraulic Press Brake
4 metre folding length
400ton/4000kn pressure
50mmc and 38mm bull nose
Knife edge tooling full length
Electric back stop
All tooling inside in cabinet
NC controller (stored inside)
Manufactured 2008
Has been covered until yesterday
Rams appear to be in good condition
Was operational when purchased approx 5 years ago
Serious capacity project machine
PPS can organize transport for this machine

Durma Double Column Metal Cutting Bandsaw

Skylarc Ref L176147

Model: Durma DCB-S 460
Three phase
Max cutting width approx 600mm
Variable speed blade
Electric vice
Mitre base
32 amp 5 pin plug
Manufactured 2012
3kW motor
Very tidy machine

Pearson 3.7 Metre 24mm Guillotine

Skylarc Ref I200632

Model: Pearson 5600 Guillotine
3.7 metre cutting width
24mm (1") capacity
Fully hydraulic
Nitrogen blade return with manual override
Electric back gauge
Hydraulic hold down
Blades we're replaced just before purchase and comes with the old blades that need sharpening
Was running when put here, has been approx 5 years, was covered until now
PPS can organize transport for this machine

Tasmac Three Phase Vertical Milling Machine

Skylarc Ref C200028

Model: Tasmac X6333 Milling Machine
1500m x 330mm table
NT40 spindle taper
120mm spindle travel
Two speed ranges
70 - 450rpm
450 - 3600rpm
Power feeds X and Z axis
Sino SDS6-3V digital read out
Work light
Coolant pump
Spindle brake
Manuals
Some accessories
Manufactured 2021
Exceptionally tidy machine

DYE 1/2" Plate Rollers

Skylarc Ref X200023

Model: DYE 8 x 1/2" M3
2530mm long rollers
Top roller approx 270mm diameter
Bottom roller approx 230mm diameter
15kW motor
Forward and reverse
Electric adjustable top roller
Bar rolling attachment on end
Pallet of assorted formers

DYE Three Phase Press Brake

Skylarc Ref P200067

Dyecon press brake
Hydraulic
Believed to be 160 ton capacity
3 metre folding width
V block has small crack in one end in small v
Some tooling
Runs in manual mode but controller doesn't power up.
Good old kiwi made machine
Front panel ram covers are also included

Very Large Three Phase English Wheel

Skylarc Ref F176141

Alloy Yachts International
Hydraulically driven English wheel
1400mm throat
Hydraulic wheel rise and fall
Powered wheel with variable speed
Hydraulic tilt action goes to full vertical position
North Hydraulics three phase hydraulic power pack
Trolley with a range of wheels and formers
Boat builders dream never available

Wellculip 5 Ton Gantry Crane Assembly

Skylarc Ref S200018

Model: Wellculip A2.50x60 A-type hinged gantry crane
6 metre span
5 ton gantry capacity
Kito 2 ton electric hoist with electric trolley
Pendant
3 phase 20 amp plug
On rollers
Will need dismantling for collection
You will need a suitable contractor with the correct safety equipment for dismantling
PPS can dismantle this machine

Georg Fischer Pipe Cutter

Skylarc Ref Z200025

Model: Georg Fischer RA 4
Single phase
1600 watt
On stainless stand
Manufactured 2005

Kwangchow Three Phase Lathe

Skylarc Ref J200633

Model: Kwangchow C6246 Gap Bed Lathe
1500mm between centers
500mm swing over bed
700mm swing over gap
16 spindle speeds
14 - 1600rpm
Morse taper No.5 tailstock
82mm spindle bore
Removable gap
Quick change tool post
Coolant pump
Fixed steady
Traveling steady
250mm 3 jaw chuck
400mm 4 jaw chuck
One speed non functional due to a damaged gear
Cross slide feed non functional, broken possible shear pin

Large Three Phase Hydraulic Power Pack

Skylarc Ref L200011

Abex Industries PIV07 020 5IR 04 3 0 hydraulic pump
25hp three phase motor
Oil tank
LAC2 Air Oil Cooler
4 channel hydraulic valve set
Mounted on steel frame
3 phase 32 amp plug
Hoses with quick release hydraulic fittings

Fronius TransSteel MIG Welder

Skylarc Ref D200055

Model: Fronius TransSteel 2500c 4R/FSC MV nc
Three phase 32 amp plug and three phase to single phase adapter
250 amp max welding output
Includes 2 MIG torches
Trolley
Manufactured 2018
Rental gas bottle not included

Ben Pearson Pipe Bender

Skylarc Ref G176142

Model: Ben Pearson Tubemaster MC59 "Muffler Shop" Pipe Bender
Single phase 15 amp plug
On wheels
Huge range of dies and accessories

Three Phase Plate Rollers

Skylarc Ref W200022

2100mm long rollers
130mm diameter bottom rollers
110mm diameter top roller
Forward and reverse
3 phase 32 amp plug
Manual top roller adjustment

40' High Cube Shipping Container

Skylarc Ref E200784

40' High Cube
Ply floor
Contents not induced

Hafco Metalmaster Three Phase Bandsaw

Skylarc Ref W200074

Model: Hafco Metalmaster BS-10LS
Three phase
250mm capacity
Coolant pump
Blade laser
Variable drop speed
Manual lift
Mounted on wheeled trolley
Manufactured 2019

Fronius TIG Welder

Skylarc Ref I176144

Model: Fronius MagicWave 3000 Job G/F
Three phase 32 amp plug
300 amp max welding output
Water cooling
In steel frame with wheels
TIG torch

2023 Fronius TransTig 170 TIG Welder

Skylarc Ref A200052

Model: Fronius TransTig 170 np
Single phase
170 amp max welding output
TIG torch and electrode
Manufactured 2023

2 x Large Sliding Section Material Racks

Skylarc Ref A200650

Each 4940mm long x 2480mm tall x 2400 wide
Each has 10 tilted frames on wheels for storing sheet metal
Very cunning space efficient design
Contents on the top of the unit are not included

Arboga Maskiner Radial Arm Drill

Skylarc Ref V200021

Model: AB Arboga Maskiner ER 1830
3 phase 20 amp plug
200mm spindle travel
Morse taper No.4 spindle
8 spindle speeds
55 - 590rpm
Automatic feed
Coolant pump
520mm x 510mm table
Approx 400mm forward and reverse head travel
Mounted on steel frame
Highly desirable Swedish machine

Global Tube and Profile End Grinder

Skylarc Ref U200072

Model: Global PRS-76H Tube and Profile End Grinder
Three phase 32 amp plug
100 x 2000mm belt
On wooden base
Spare belts

Daito Double Column Metal Cutting Bandsaw

Skylarc Ref V200073

Model: ST4070G Cut Off Machine
Electric vice
Max cut size 700mm
Coolant pump
3.7kW main motor
No blade fitted but new blade included
Vice works intermittently
Feed rollers won't engage

Hafco Metalmaster Metal Cutting Bandsaw

Skylarc Ref U200618

Model: Hafco Metalmaster BS-130S
500mm max cutting capacity
Three phase 1.5kW main motor
16 amp plug
Electric clamping vice
Electric rise
Manufactured 2011

Fronius MIG Welder

Skylarc Ref J176145

Model: Fronius TrasPlus Synergic 2700 4RE/E
Three phase 32 amp plug
270 amp max welding output
Water cooling
Mounted on trolley
Manufactured 2007
Leak in one water cooling line
Rental gas bottle not included

Hydraulic Pipe Tee Installation Kit

Skylarc Ref V200125

Tee installation kit
Includes range of formers and fittings
Wheeled case
Enerpac Hydraulic Pump Model P80.
Includes attached Enerpac Hollow Hydraulic Cylinder RCH123.

Spirits Still and Accessories

Skylarc Ref K200634

Still made from two kegs with two electric elements that can be run independently
Condenser and reflux tower, internal cleaning
Upper holding tank with carbon filters
Secondary carbon holding tube
Course and very fine carbon filters
Final holding tank on bottom
Separate holding tank for product made from still
Assorted holding bottles, some with Jack Daniels wood shavings
Heaters
Beer brewing accessories
2 200l plastic barrels for fermentation
Spare keg
Some hose

4 x 40 Ton Load Skates

Skylarc Ref T176155

4 x 40 ton capacity load skates
Rotating top plates
570mm x 460mm x 100mm each
Collection for these will be by arrangement the week of the 31st August

20' Shipping Container

Skylarc Ref E200758

Standard container
Generally tidy, needs a water blast
Some repairs to roof
Small hole in roof in back corner

Atlas Copco Three Phase Compressor

Skylarc Ref F200005

Model: Atlas Copco AIRLET LE 12
Two cylinder
10 bar working pressure
Atlas Copco air receiver
15kW three phase motor
Nilsen control box
On 32 amp three phase plug
Manufactured 1984

Peddinghaus Mechanical Punch and Shear

Skylarc Ref K200010

Model: Peddinghaus 210 Super 13
66 ton capacity
Flywheel machine
Three phase on 32 amp plug
Range of profile cutting
Notcher
Punch with some tooling

Trupro Three Phase Radial Arm Drill

Skylarc Ref Z200779

Model: Trupro TF-900S Radial Arm Drill
Morse taper No.4 spindle
180mm spindle travel
6 spindle speeds
88 - 1500rpm
550mm x 400mm x 320mm t slot table
Plate bolted on top
Three feed rates 0.09mm/r, 0.05mm/r, 0.153mm/r
Approx 800mm arm travel
Coolant pump
16mm chuck
Tidy machine just needs a clean

Falcon Radial Arm Drill

Skylarc Ref H200319

Model: Falcon Acra Drill FM-700 Radial Arm Drill
Electric rise and fall
6 spindle speeds
88 - 1500 rpm
3 feed rates 0.05mm/r, 0.09mm/r, 0.153mm/r
Morse taper No.4 spindle
Approx 700mm arm travel
190mm spindle travel
Coolant pump not connected
405mm x 305mm x 310mm tall t slot block

Set of Large Three Phase Tank Rollers

Skylarc Ref U200800

Each unit 2660mm long x 950mm wide x 870mm tall
680mm diameter x 130mm wide rollers
Three phase motors with 16 amp plugs Adjustable positions on rollers
1630mm between centers of rollers at widest setting

Manual Hydraulic Workshop Press

Skylarc Ref H200007

Unknown capacity
2 pressure handles
Adjustable height tables
Approx 350mm stroke
600mm between uprights
Press works but return valve seems stuck
Will come down but doesn't return

Heavy Duty Mobile Workbench

Skylarc Ref B200027

1090mm work top height
Folding work light
Single and three phase power outlets
Doors front and end
On heavy duty castor wheels
5mm plate steel top
Lifting eyes
Includes contents of industrial supplies

Two Piece Heavy Duty Mobile Workbench

Skylarc Ref G200032

1660mm x 700mm worktop
1180mm worktop height
Heavy duty castor wheels
2 units clamp together
Folding rear back board (needs securing)
Forklift pockets
Two cupboards in front with access from one side
Small cupboard other end
Contents of industrial supplies
Adjustable hold down rails with fittings on the rear
Built to survive the apocalypse

Fronius TransPocket 1500 Welder

Skylarc Ref B200053

Model: Fronius TransPocket 1500 TIG WIG-DC-Se
150 amp max welding output
Case with accessories

CEA PlasmaTech Plasma Cutter

Skylarc Ref L200063

CEA PlasmaTech Shark 105 Plasma Cutter
Three phase
SK125 torch

Hand Pipe Bender

Skylarc Ref I200580

Hand Pipe Bender

10 ton Portable Hydraulic Hand Pump

Skylarc Ref G200578

10 ton Portable Hydraulic Hand Pump

Folding Container Ramp

Skylarc Ref W200776

Heavy duty container ramp
Folding front
Forklift pockets

Large Steel Mobile Worksite Toolbox

Skylarc Ref S200278

Heavy duty steel site box
Industrial castor wheels (some need replacement)
Pneumatic lift front door
Drop down lower door
Slide out mitre saw section
Fold up aluminum end workbench (needs supports fitted)
Shelves and hangers
Lifting eyes
Contents of industrial supplies
Beautifully made

Fronius TIG Welder

Skylarc Ref K200816

Model: Fronius TransTig 1700 G/F
170 amp max welding output
8 metre lead with 8 metre extension (16 metres total)
Single phase
Soft case

NRA Three Phase Bandsaw

Skylarc Ref M176148

Unknown model
350mm max cut depth
580mm throat
740mm x 630mm cast tilting table
Three phase 32 amp plug
Sliding blade guard
Made in Italy

Stankoimport Gear Head Drill Press

Skylarc Ref H176143

Model: Stankoimport 2H135 Drilling Machine
Three phase (no plug)
4kW main motor
12 spindle speeds 45 - 1400rpm
12 feed rates 0.1mm/r - 1.6mm/r
250mm spindle travel
Morse taper No.4 spindle taper
500mm x 450mm t slot table
Coolant pump
Manufactured 1977
Runs, feeds untested
Electrical issue, contactors cycle on and off quickly when shut down sometimes

Pullmax Machine

Skylarc Ref P200015

Model: Pullmax P1
Sheet metal machine
Nibbling, shearing, beading, and flanging
Max capacity 1/8" mild steel
Three phase 20 amp plug
Some tooling

Very Large Hydraulic Press Assembly

Skylarc Ref R200017

Believed to be approx 1500 ton capacity
Includes hydraulic pump, motor and tank
Approx 450mm diameter spear
Cast stand
Ram has been moved recently with a small hydraulic pump

Large Jaespa Three Phase Bandsaw

Skylarc Ref D200315

Model: Jaespa ASH9
Max cut depth approx 250mm
Throat 880mm
750mm x 950mm cast table with t slots
Hydraulic table feed mechanism.
Power depth control
Variable blade speed
New bearings
New hydraulic hoses
Runs well

Massive Vintage Archdale Radial Arm Drill, Faulty

Skylarc Ref M176122

Massive Vintage Archdale Radial Arm Drill.
ID plates are missing so model and age details are unknown. Estimating its probably 1930's or 1940's era?
Morse Taper No.5 drill chuck.
Approx 550mm diameter main vertical cylinder.
Main arm length approx 2500mm.
3-phase.
Owner estimates around 12-ton weight.
This old massive unit is not fully operating. Owner states vertical column motor is blown and column is very rusty. Horizontal guide rails are also rusty. Main drill motor apparently functions we have been told but not tested as electrical wiring is exposed and open at rear.

Wadkin Three Phase Bandsaw

Skylarc Ref K176146

Wadkin Bursgreen
Three phase 32 amp plug
760mm x 760mm tilting cast iron table
250mm max cutting thickness
550mm throat
Beautifully made cast iron machine

Three Phase Drill Mill

Skylarc Ref E200628

Model: Long Chang LC-30A
600mm x 240mm t slot table
30mm drilling capacity
130mm spindle travel
Morse taper No.3 spindle taper
12 spindle speeds 90 - 2080rpm
Belt drive
Spindle return spring doesn't work
3 phase 32 amp plug

Wadkin Three Phase Bandsaw

Skylarc Ref W200802

Model: Wadkin Bursgreen 20.BZB.63176 Bandsaw
Three phase
New multicut blade
Mostly used for aluminum
610mm x 510mm cast tilting table
Max cut depth 300mm
490mm throat

Bosch Miter Saw on Stand

Skylarc Ref L200037

Model: Bosch GCM 12 GDL Professional
Bosch wheeled stand
2000 watt
3800 rpm
305mm blade
Broken dust extraction part

Bosch Miter Saw on Stand

Skylarc Ref V200047

Model: Bosch GCM 12 GDL Professional
Bosch stand
2000 watt
3800 rpm
305mm aluminum blade

IMA Gear Head Drill Press

Skylarc Ref U176156

Model: IMA TYP A60-S
12 spindle speeds
85 - 2750rpm
140mm spindle travel
No 3 morse taper spindle
16mm chuck
390mm diameter adjustable height table
20 amp three phase plug
Includes change gears

Peddinghaus Manual Shear

Skylarc Ref H200059

Mechanical metal shear
Flat bar
Round bar
Angle steel
Sheet metal
Unknown capacity
On stand with handle

Three Unit Modular Steel Workbench

Skylarc Ref F200031

2200mm x 930mm worktop total
1190mm worktop height
Three units on heavy duty castor wheels
Record No 6 vice
Single phase power outlets
Folding light stands at rear
Two cupboards with roller drawers
Third has open shelving
Cupboard on end of side unit
5mm plate steel top
Needs clamps installed at the front to lock together
Includes contents of industrial supplies

Fronius TransPocket 180 Welder

Skylarc Ref W200048

Model: Fronius TransPocket 180
180 amp max welding output
Arc electrodes
Single phase
Manufactured 2018

Single Phase Fuel Pumping System

Skylarc Ref U200514

Electric fuel pump with counter
Model: DYB-70AT
Fuel filler nozzle
Various pipes and stainless fittings
In plastic carry case

Crate of Stainless Steel Pipe Fittings

Skylarc Ref V200567

Crate of Assorted Stainless Steel Pipe Fittings

Crate of Assorted Stainless Steel Fittings

Skylarc Ref U200566

Crate of Assorted Stainless Steel Fittings

FRONIUS Magic Cleaner Hose Pack

Skylarc Ref E200576

Fronius Magic Cleaner Hose Pack

7 x Ford Ranger Alloy Wheels

Skylarc Ref Y200752

Rim Diameter

18"

Rim Width

6"

Style

4WD/SUV

265/60R18 110T
5 stud
JB3J-1007-AA

Barrell/Pipe Rollers

Skylarc Ref R200589

Each roller is 1000mm apart and approximately 170mm in diameter

Barrel/Pipe Rollers

Skylarc Ref S200590

Each roller is approximately 280mm in diameter and 675mm apart at centre of roller

Heavy Duty Three Phase Linisher

Skylarc Ref B200781

240mm diameter x 200mm wide solid wheels
290mm diameter x 200mm wide rubber lined wheels
4kW three phase motor
Heavy duty plate steel frame

3 Phase Belt Grinder

Skylarc Ref F200317

Model: S-150 Belt Grinder
150mm x 2000mm belt
600mm x 150mm sanding surface
3kW motor
3 phase 32 amp plug

New Press Brake V Block

Skylarc Ref O200794

3 metre V block
120mm x 120mm
Never used but dirty from storage

2 x Boat Cradles

Skylarc Ref J200867

one frame is 2000mm x 4200mm 1200mm
other frame is 2000mm x 3900mm x 1400mm

Large Frame on Wheels

Skylarc Ref K200868

Large frame on wheels

4 pallets of box steel

Skylarc Ref X200855

longest length 2600mm
boxsteel in assorted sizes

3x 14m gantry crane frames

Skylarc Ref B200859

2x 4 tonne
1x 3 tonne
YoM 2000

2 x Boat Building Frames

Skylarc Ref L200869

2 x Boat building frames

lot of assorted stainless steel

Skylarc Ref M200870

longest length is 6000mm

2 x Large Chub Safes

Skylarc Ref P200093

780mm wide x 800mm deep x 1840mm tall
Both are open
Combinations included
Both unlocked
No keys, Keys only lock the dials and are not needed to lock the safe

Large Spreader Bar

Skylarc Ref K200088

4400mm long
Rings on ends
Two lift points
Unknown capacity

Large 8-Metre Heavy Duty Workbench & Materials Rack

Skylarc Ref I200346

Large 8-Metre Heavy Duty Workbench with attached upper rack for long materials.
50x50mm and 75x50mm box steel frame.
20mm plywood work surface 1130mm above floor.
A very large and heavy duty versatile unit.
NOTE that this unit is all welded together as one complete piece. The buyer will need to bring an appropriate large trailer or truck to transport this unit, or bring tools to cut it up into smaller sections.
Also NOTE that the items seen under and on the workbench and racks are NOT included!

Sliding Section Material Rack

Skylarc Ref W200854

Large materials rack

Radius Benders Pipe Bender

Skylarc Ref I200008

Radius Benders hydraulic pipe bender
On trolley
3 phase 20 amp plug
Wide range of formers
Largest 2"
Goes but has a leaking hydraulic ram

Neutrix Tungsten Electrode Grinder Machine

Skylarc Ref G174920

Neutrix Tungsten Electrode Grinder Machine.
Made in Denmark by AP Technology.
240V single phase.
See photos for included accessories.
Crack in plastic case corner, see photo.
Tool appears as new unused or used very briefly. Case exterior shows storage wear.

Tanner Hydraulic Track Jack

Skylarc Ref Z176161

Model: Tanner Machinery HHQD-30
30 ton capacity
160mm ram stroke
In box

Heavy Duty Modular Steel Workshop Cabinet

Skylarc Ref A200026

Steel workshop cabinets
Splits in two via clamps at the front and rear
cupboards both ends and front
On heavy duty castor wheels

Tooline Three Phase Cut Off Saw

Skylarc Ref T200513

Model: High-speed Abrasive Wheel Cut-off Machine
400mm blade
2.2kW motor

Starrett 799 Series 1000mm Digital Vernier Caliper

Skylarc Ref X200205

Starrett 799 Series Digital Vernier Caliper.
Model No.799AZ-40/1000.
1000mm measuring length.
Includes Case and original box.
Tool shows very light usage. Factory plastic cover still on display screen.

Hydraulic Hose Crimping Device

Skylarc Ref H200501

Hydraulic Hose Crimping device with separate box of additional sizes

Shinano 1" Drive Air Impact Wrench SI-1760T

Skylarc Ref J200113

Shinano 1" Drive Air Impact Wrench.
Model No. SI-1760T.
Made in Japan.
90psi, 6.2Bar.
4500rpm.
Includes non-original hard plastic case.
Tool appears as new unused as 1" socket head mount, as well as the tool body, shows no usage wear, see photos. Case exterior shows workshop storage wear.

Tooline Single Phase Drill Press

Skylarc Ref V176157

Model: Tooline DP-515F
Single phase 1100 watt motor
MT3 spindle taper
16mm drill chuck
12 speeds 110 - 2880rpm
Belt drive
130mm spindle travel
475mm x 430mm adjustable height table
Needs a clean but otherwise tidy

Fein Pipe Sanding & Polishing Tool Set RS 12-70E

Skylarc Ref N200117

Fein Pipe Sanding & Polishing Tool Set RS 12-70E.
Single phase.
Includes steel case.
Operates normally, see video.

Large Three Phase Bandsaw

Skylarc Ref Q200744

Model: S-1000-VR
1060mm x 1220mm titling steel table
Approx 400m max cut depth
1000mm throat
Blade grinder
Three phase 32 amp plug

Enerpac Hydraulic Pump P80 w/ Jack Attachment

Skylarc Ref W200126

Enerpac Hydraulic Pump P80. Cylinder housing 450mm ling, 90mm diameter.
Includes attached Enerpac Flat-Jac Model No.RSM200.
Made in USA.

Metalex Vertical & Horizontal Round Bending Machine by Metalex

Skylarc Ref Y176134

Vertical & Horizontal Round Bending Machine by Metalex.
Model No.RBM 40HV.
160mm diameter rollers heads.
Max capacities are unknown.
3-Phase 4-pin 32A plug.
Manually adjusted top roller

Hamilton Engine Crane

Skylarc Ref N176149

Model: FC325 SY
Double acting hydraulic
Unknown capacity
New Zealand made

Irega Heavy Duty Adjustable Wrench, 750mm x 78mm

Skylarc Ref U176104

Irega Heavy Duty Adjustable Wrench.
750mm length
78mm jaw capacity.
Made in Spain.

Belcher Hydraulic Broaching Press

Skylarc Ref G200058

Unknown model
Ram length 550mm
40mm diameter spear
Designed to use with external hydraulic power pack

Three Phase Polisher

Skylarc Ref B200001

Three phase polisher on metal stand
32 amp plug

ROH Mechanical Hacksaw

Skylarc Ref E200004

ROH Mechanical Hacksaw
380mm blade length
Three phase 32 amp plug
Made in Hastings

Fronius Magic Cleaner Weld Cleaner

Skylarc Ref I200060

Model: Fronius Magic Cleaner A-4600 Weis
Single phase
With brush and electrode

Fronius Magic Cleaner Weld Cleaner

Skylarc Ref J200061

Model: Fronius Magic Cleaner A-4600 Weis
Brush and accessories
No negative electrode

Single Phase Hydraulic Roll Groover

Skylarc Ref M200090

Model: YGCC
Capacity 11/4" - 6"
550 watt
23 rpm
Manufactured 2015

Uni-Mig Three Phase MIG Welder

Skylarc Ref V200099

Model: Uni-Mig 500S
Uni-Mig KT 90 wire feed
32 amp plug
500 amp max welding output
Powers up and wire feed runs

Large Mobile Adjustable Height Stand

Skylarc Ref N200091

Winch adjustable height arm
Adjustable length
Rotating
On heavy duty castor wheels

BRAMLEY SJ2 Swaging and Jennying Machine

Skylarc Ref U200540

BRAMLEY SJ2 Swaging and Jennying Machine

PowerTower Portable Distribution Unit

Skylarc Ref Y200492

Model: D4332 Three Phase
2 x three phase outlets
9 x single phase outlets
5 pin plug

Jackson Lifeguard 17 Temporary Power Reticulation System

Skylarc Ref Q200718

Jackson Lifeguard 17 Temporary Power Reticulation System.
Single and 3-phase outlets, see photos.
Measures approx 450x450x600mm.
See manufacturer website below for further specs.
https://jackson.co.nz/jackson_electrical/lifeguard-17/

2 x Hydraulic power packs

Skylarc Ref Q200536

5.5kW three phase motors
710mm x 500mm x 420mm tanks
Vickers valves

Assorted Pipe Stands

Skylarc Ref F200577

Assorted Pipe Stands

Small Stainless Steel Tank

Skylarc Ref C200756

Tank dimensions 850mm diameter x 1150mm tall
Bottom outlet with valve
Door on side
Top filler inlet

John Heine Flanger

Skylarc Ref R200745

Model: John Heine 55c
Large diameter pipe flanger
Three phase 32 amp plug
Some formers

Lot of Very Large D Shackles

Skylarc Ref V200749

Approx 20 total
Largest 350mm x 300mm

2 x Large Hydraulic Rams

Skylarc Ref Z200753

Overall length 1230mm
Spear length 600mm
Double acting rams
With hoses and accessories

5 x Ford Ranger Alloy Wheels

Skylarc Ref L200765

Rim Diameter

18"

Rim Width

6"

Style

4WD/SUV

265/60/R18
JB3J-1007-AA

Enerpac 60 Ton Cylinder and Air Hydraulic Unit

Skylarc Ref D200757

Enerpac 10000psi 60 ton hollow center hydraulic cylinder
Enerpac Turbo PAT1102N air hydraulic power pack
Missing bolt for foot controller
60 ton RAM needs return spring
Power pack needs a plunger kit

Hamilton Engine Crane

Skylarc Ref M200766

Model: FC325 SY
Double acting hydraulic
Unknown capacity
New Zealand made

2 x Large Brass Boat Propellers

Skylarc Ref X200777

870mm diameter
65mm shaft diameter

Enerpac Hydraulic Cylinder RC108

Skylarc Ref S200330

Enerpac Hydraulic Cylinder.
Model RC108.
297mm collapsed length.
57mm diameter.
501mm extended height.
10-Ton Capacity.
Missing top thread plastic protector and connection caps, otherwise excellent overall condition.

https://nzsafetyblackwoods.co.nz/product/enerpac-general-purpose-hydraulic-cylinder-10t-203mm-stroke-03859203

Brobo Three Phase Cut Off Saw

Skylarc Ref P200795

Model: Brobo Waldown MF350 Cold Cut Saw
350mm blade
2.2kW three phase motor
Vice is siezed
No plug

2014 Ford Ranger Parts

Skylarc Ref B200833

2014 Ford Ranger Parts

Large Boat Building Frame and Lifting Jig

Skylarc Ref A200858

Large wheeled boat building dolly
Forklift lifting boat frame on top

Large Spreader Bar

Skylarc Ref C200860

8.1 metre spreader bar
4 ton capacity
Grey unit only

Jiffy High Speed Metal Cutter Saw

Skylarc Ref M200012

Model: Donaldson DE10 Hi-Speed Metal Cutter
515mm diameter blades
Three phase (no plug)
Made in New Zealand

Large Hilmor Tube Bender

Skylarc Ref O200014

Model: Hilmor MD.4
²q12" 2 1/2" 3" 3 1/2"
800mm radius approx
On steel wheels
DOP11A-10
Three phase 5 pin 20 amp plug

1500 Ton Hydraulic Press

Skylarc Ref T200019

Press frame and ram only
No hydraulics
Originally built as part of an artificial diamond project

Large Double Ended Grinder

Skylarc Ref X200049

SM9 model
Three phase
2 separate independent motors

Large Plate with Frame

Skylarc Ref Y200050

1400mm x 2400mm x 20mm plate top
Steel frame
Contents not included

Jiffy High Speed Metal Cutter Saw

Skylarc Ref I200606

Model: Donaldson DE10 Hi-Speed Metal Cutter
515mm diameter blades
Made in New Zealand

Large Hydraulic Press

Skylarc Ref F200629

Partially completed workshop press
1280mm between uprights
Large Hydraulic ram approx 800mm long x 180mm diameter
No pump

2 x Red Spreader Bars

Skylarc Ref Z200857

6000kg capacity
Red units only

Large NRA Three Phase Bandsaw

Skylarc Ref V200645

1140mm x 760mm cast tilting table
Approx 500mm max cut depth
780mm throat
No plug
Blade needs fitting

Bosch Corded Professional SDS Max Combi Hammer GBH 11 DE

Skylarc Ref F174919

Bosch Corded Professional SDS Max Combi Hammer GBH 11 DE.
Includes plastic case.
Shows light use.

GME 5W DIN Mount UHF CB Radio w/ ScanSuite TX4500S

Skylarc Ref D200133

GME 5W DIN Mount UHF CB Radio w/ ScanSuite TX4500S.
Item is new unused eith original mounting accessories and box. Box exterior has some storage marks.
See the GME website below for further item specs:
https://www.gme.net.au/au/fixed-mount-radios/tx4500s/

Enerpac Air Hydraulic Pump PA133

Skylarc Ref X200127

Enerpac Air Hydraulic Pump PA133.
Made in USA.
https://www.enerpac.com/en-us/pa-series-air-pumps/air-pump/PA133?srsltid=AfmBOopGWvGBmu1RSk1HrFgGQeuyAI23leX95WblonztIH_QKA5sPi7X

Titan Wire Rope Winch, 3200kg Capacity

Skylarc Ref I200268

Titan Wire Rope Winch.
Model No.UT32.
3200kg Capacity.
Includes cranking lever

Titan Wire Rope Winch, 3200kg Capacity

Skylarc Ref J200269

Titan Wire Rope Winch.
Model No.UT32.
3200kg Capacity.
Includes cranking lever

Titan Wire Rope Winch, 3200kg Capacity

Skylarc Ref K200270

Titan Wire Rope Winch.
Model No.UT32.
3200kg Capacity.
Includes cranking lever

Titan Wire Rope Winch, 3200kg Capacity

Skylarc Ref L200271

Titan Wire Rope Winch.
3200kg Capacity.
Includes cranking lever

3 Phase Linishing Machine

Skylarc Ref T200591

3 phase Linishing machine
side rollers used for rolling pipe for polishing
16amp 3 phase power

3 phase Linishing Machine

Skylarc Ref U200592

3 phase linishing machine
16amp 3 phase plug

Kincrome Tool Storage Box

Skylarc Ref G200812

Kincrome Tool Storage Box

Assorted Box, Tube, Flat, Angle Aluminium & Steel Lengths

Skylarc Ref H200345

Assorted Box, Tube, Flat, Angle Aluminium & Steel Lengths.
Most lengths are aluminium.
Lengths vary with longest being full uncut 6-metre Lengths.
Around 35-40 or so individual units in auction.
NOTE that the auction only includes the lengths of aluminium and steel on the racks!

Bosch Corded Professional SDS Max Rotary Hammer GBH 5-40 DCE

Skylarc Ref R200121

Bosch Corded Professional SDS Max Rotary Hammer Model GBH 5-40 DCE.
Includes assorted drill bits plus 2x SDS Plus adapters.
Includes plastic case.

Pelican 1650 Protector Wheeled Hard Case.

Skylarc Ref A200130

Pelican 1650 Protector Wheeled Hard Case.
Exterior dimensions are 781x520x295mm.
Interior dimensions are 724x441x267mm.
Wheels at one end with extendable handle at other end.

Metal Storage Container

Skylarc Ref H200605

External Measurements including eye bolts and frame are 1500mm x 700mm x 600mm
Internal Measurements are 1300mm x 600mm x 480mm

Chubb Large Safe, 800x775x1580mm

Skylarc Ref G200318

Chubb Large Safe.
Made in New Zealand.
Model unknown.
200mm thick door with 2x combination locks.
4x interior compartments each with dual key locks.
Top three inner compartments each measure approx 520x430x245mm.
Bottom inner compartment measures approx 520x430x510mm.
Comes with keys and combination

3000kg Long Fork Pallet Jack Truck

Skylarc Ref Y200622

3000kg Long Fork Pallet Jack Truck
GS branded.
Forks are 1810mm long, 155mm wide, spaced approx 370mm apart.
Functions normally.

Enerpac Pressure Gauge GF-50

Skylarc Ref T200331

Enerpac Pressure Gauge GF-50.
100mm diameter face.
kN scale.
As new unused.

Heavy Duty Mobile Welding Table Workbench

Skylarc Ref W176132

Heavy Duty Mobile Welding Table Workbench.
16mm thick steel plate top with 28mm diameter holes spaced 100mm apart on centre.
150mm diameter castor wheels.
Some rust from outdoor storage

Heavy Duty Mobile Table Workbench

Skylarc Ref U176130

Heavy Duty Mobile Table Workbench.
20mm thick steel plate top.
Heavy steel frame on 130mm diameter castor wheels.

Forklift Mounted Lifting Extension Frame

Skylarc Ref Q176126

Forklift Mounted Lifting Extension Frame.
Appears custom built so lifting capacities are unkown.
Fork mounting slots are 220x80mm.
200x100mm main beam 2660mm long.
Extension I-beam 180x90mm and approx 2000mm long.
Rusty from outside storage.

4.5-Ton NK Series Automatic Plate Clamp by Tractel

Skylarc Ref M174926

4.5-Ton NK Series Automatic Plate Clamp by Tractel.
Model No.NK3
Jaw capacity 80mm to 120mm.
Shipping not offered as item is too heavy for our courier.
https://www.tractel.com/us/product/topal-automatic-plate-clamp-nk/40547

4.5-Ton NK Series Automatic Plate Clamp by Tractel

Skylarc Ref O174928

4.5-Ton NK Series Automatic Plate Clamp by Tractel.
Model No.NK3
Jaw capacity 40mm to 80mm.
Shipping not offered as item is too heavy for our courier.
https://www.tractel.com/us/product/topal-automatic-plate-clamp-nk/40547

Paslode Cordless Angled Bradder IM250A Li 16GA

Skylarc Ref Z174913

Paslode Cordless Angled Bradder.
Model No.IM250A Li 16GA.
Includes charger.
Includes 2x Li Ion 7.4V 9.3Wh batteries.
Includes 2x new replacement contact elements.
Tool operates, see video link below.
Shows very light usage.

Paslode Cordless FrameMaster Li Framing Nailer

Skylarc Ref C174916

Paslode Cordless FrameMaster Li 30-Degree Framing Nailer.
Includes 2x Li Ion 7.4V 9.3Wh batteries.
Includes charger.
Includes a spare new contact element replacement parts.
Tool shows very light usage.
See video for operation example.

Carter Vice on Stand

Skylarc Ref D200003

Carter 6" Semi Steel vice
On heavy duty steel stand

Homge Milling Machine Vice

Skylarc Ref O200092

160mm wide jaws
Swivel base
Stiff to move
Missing handle

Milling Machine Indexing Head

Skylarc Ref S200096

Posicion de la Abrazadera brand
140mm three jaw chuck
Change gears
Tailstock
Turns freely

Bramley Tube Bender on Stand

Skylarc Ref X200101

Bramley manual tube bender
5 x aluminum formers
2 x handles
On heavy duty pedestal stand

Bramley Bar Bender

Skylarc Ref Q200484

Model: Bramley No.2 Bar Bender
On pedestal stand

Lathe Tooling Set

Skylarc Ref Z200727

TM brand
Left and right hand 25mm turning tools
25mm boring bar
Some tips
Case

Steel Custom Built Model of Fishing Vessel Kotuku

Skylarc Ref O200248

Steel Custom Built Model of Fishing Vessel Kotuku.
Made from custom cut welded steel parts.
Approx 1200mm long, 186mm wide, 615mm tall (including stand).
The Boat model itself weights approx 40-45kg.
Includes heavy steel base stand 750x190mm.
Would benefit from a cleanup and new paint.
We are unable to offer shipping due to the weight and size of the item. If buyer wants shipping we suggest they try Pack.& Send in Palmerston North to collect.

Very Large T Slot Table

Skylarc Ref B200755

40mm tee slots
Cast iron construction

Torpedo 7 Sea Kayak

Skylarc Ref T200773

Torpedo 7 Explorer
2 seat sea kayak
Includes 3 life jackets
Paddles
Wheeled stand

Chubb Safe

Skylarc Ref A200780

Includes combination
Keys included

Large Steel Rack

Skylarc Ref V200801

6 levels
Heavy duty box steel construction
Contents not included

Heavy Duty Site Welding Trolley

Skylarc Ref F200811

Aluminum construction
Suspension
Pneumatic tyres

Three Phase Polishing Machine

Skylarc Ref N200637

Pedestal polishing machine
No plug

Huge Pallet of Strops

Skylarc Ref S200356

Lifting and tie down strops
Variety of sizes and styles

Riot Astro 58 Kayak.

Skylarc Ref F200369

Riot Astro 58 Kayak.
Age of item is unknown.
Has been in open storage for some time, very dusty surfaces, holes in seat, see photos.
No obvious hull cracks but we are unable to water test the Kayak to verify water tightness.
See the manufacturer website below for further item specs:
https://riotkayaks.com/products/astro-58-kayak

Titan Branded Kayak

Skylarc Ref G200370

Titan Branded Kayak.
Unable to locate an ID label.so specific model is unknown.
Kayak has been stored open for some time, very dusty surfaces.
No obvious cracks in hull, but we are unable to water test the Kayak so water tightness is untested.

63amp Three Phase Lead

Skylarc Ref Z201117

3 phase 5 core 63 amp lead
Approximately 25 to 30 meters
One plug needs fitting

King Tony 6-Piece Large Size Metric Combination Wrench Set

Skylarc Ref L174925

King Tony 6-Piece Large Size Metric Combination Wrench Set.
Part No.1296MRN.
Includes Wrenches in metric sizes of 34mm, 36mm, 38mm, 41mm, 46mm, and 50mm.
Wrenches all appear unused with no obvious usage marks. Canvas bag backside shows some marks and wear from toolbox storage.

Bosch Professional Inspection Camera GOS 10.8 V-LI

Skylarc Ref O174902

Bosch Professional Inspection Camera.
Model GOS 10.8 V-LI.
Includes Li-Ion 10.8V 14Wh battery.
Includes charger and plastic case.

Makita Corded Reciprocating Saw w/ AVT

Skylarc Ref K200114

Makita Corded Reciprocating Saw w/ AVT.
Model No.JR3070CT.
Includes assorted Used blades and plastic carry case.

Bosch Professional 36V Cordless Reciprocating Saw

Skylarc Ref T200149

Bosch Professional 36V Cordless Reciprocating Saw Set.
Saw model No.GSA 36V-Li.
Includes 1x Bosch 36V, 1.3Ah, 46Wh Li-Ion Battery.
Includes charger AL 3640 CV.
Includes plastic case.
Dirty surfaces.

Bosch 36V Professional SDS-Plus Rotary Hammer

Skylarc Ref A200156

Bosch 36V Professional SDS-Plus Rotary Hammer.
Hammer model No.GBH 36 VF-LI.
Includes charger AL 3640 CV
Includes Bosch 36V 2Ah, 72Wh Li-Ion Battery.
Includes plastic case.

DuraVac 90L Heavy Duty Wet Dry Vacuum EU-VH0423

Skylarc Ref I200320

DuraVac 90L Heavy Duty Wet Dry Vacuum.
Model No. EU-VH0423.
90L tank size.
Includes assorted hose end attachments, see photos.
Operates normally.
See manufacturer website below for further item specs;
https://www.duravac.co.nz/eu-vh0423

Large Steel T-Slot Mill Table, 1740x1220x95mm

Skylarc Ref E200368

Large T-Slot Milling Table.
T-Slots spaced 150mm apart on centre.
Upper slot width 20mm, lower width 38mm.

Heavy Duty Mobile Table Workbench

Skylarc Ref V176131

Heavy Duty Mobile Table Workbench.
Top sheet is a detached 3005x1535x4mm steel sheet.
Main frame is 2450x1215x950mm and made from 100x100mm and 75x75mm box steel with 18mm thick MDF board top.
150mm diameter castor wheels.

Industrial Compressed Air Tank

Skylarc Ref P176125

Industrial Compressed Air Tank.
Unable to locate an ID plate so capacity and specs are unknown.
2x 50mm diameter input or output connection points both with 150mm diameter flanges.
One standard 10mm connection point.
Has been stored outdoors.

Makita Corded Angle Drill DA6301, As New

Skylarc Ref R176101

Makita Corded Angle Drill model DA6301.
13mm Keyed chuck with key.
Includes steel carry case 465x195x180mm.
Tool is as new and unused. Original cardboard box has some damage, see photos, steel carry case is as new.
https://www.makita.ca/index2new.php?event=tool&id=758

ToolPro Mobile Worksite Tool Chest

Skylarc Ref S200122

ToolPro Mobile Worksite Tool Chest.
Steel construction in orange finish.
130mm diameter castor wheels.

Dangerous Goods Cabinet

Skylarc Ref H200033

Justrite brand
Flammable Liquids Cabinet
30 litre capacity

Steel Toolbox and NT50 Mill Cutters

Skylarc Ref S200070

Wheeled steel site box
NT50 mill tool holders
Several rusty mill face cutters
NT50 horizontal arbors

Bosch Professional 1" Drive Impact Wrench GDS30

Skylarc Ref O200170

Bosch Corded Professional 1" Drive Impact Wrench model GDS30.
Includes side handle, original box, and user manual.

10M Lifting Sling (Not Rated)

Skylarc Ref P200717

10M Lifting Sling (Not Rated).
10000mm x 295mm x 5mm.

Ridgid No 45A Tristand Pipe Stand

Skylarc Ref O200560

Brand: Ridgid
Model: No 45A
Type: Tristand pipe stand
Red cast top plate with integral pipe chain vise
Chain vise with serrated jaws fitted
Three black tubular steel legs
Perforated steel tool tray between legs
Legs fold for transport and storage

Machine Vice

Skylarc Ref R200563

Jaw width 150mm

Strainrite Fencing Tools

Skylarc Ref E200732

Strainrite Eze Pull crimpers and crimps
Strainrite wire strainer
Staples
Ratchet wire strainers

Baofeng UV-81C NZ UHF PRS Two Way Radios

Skylarc Ref H200579

Brand: Baofeng.
Model: UV-81C.
PRS two way radios.
NZ UHF PRS.
80 channels.
Transmit power 5 watts.
AS NZS 4365:2011 compliant.
Two handsets included.
Each handset has detachable antenna and USB desktop charger base. Includes Techoman magnetic mount antenna with coaxial cable, in-line microphone cable, Techoman TM0811 wired headset and Baofeng UV-81C user instructions.

Eclipse Benchtop Vice EMV-8

Skylarc Ref V200255

Eclipse Benchtop Vice EMV-8.
200mm wide jaws.
Some surface rust on unpainted areas, otherwise excellent condition, possibly unused. Dusty from Workshop storage.

Aluminum TIG Welder Trolley

Skylarc Ref C200782

Heavy duty box aluminum frame
Space saver wheels

Hydraulic Power Pack Set + ToolPro Mobile Tool Chest

Skylarc Ref J200295

Laege Hydraulic Power Pack Set + ToolPro Mobile Worksite Tool Chest.
2x hydraulic hand pumps, unknown brand, with a large number of attachments and accessories, see photos.
Also Includes ToolPro mobile tool chest Steel construction in orange finish with 130mm diameter castor wheels.

Kincrome Dial Indicator

Skylarc Ref D200601

Kincrome Dial Indicator

Three Phase Extension Cable with Multi Board

Skylarc Ref T200279

32 amp three phase
Multi board with 3 32 amp sockets
Approx 10 metres

Large Machine Vice

Skylarc Ref B200807

Jaws are 250mm wide

Calibre Tool Storage Box

Skylarc Ref E200810

Calibre Tool Storage Box

PowerTower Site Power Box

Skylarc Ref L200817

Model: PowerTower DA322 Three Phase
Portable distribution unit
2 x three phase outlets
9 x single phase outlets

Ninja H2R paddock stand

Skylarc Ref C200834

Ninja H2R branded paddock stand.
Black metal frame.
Four green wheels.
Includes cross brace bar.
Includes metal adaptor in plastic bag.

Haacon Jack

Skylarc Ref D200861

Model: S/DS989-232975 G
3 ton capacity
Two speed ranges

12-Metre 3-Phase 32A Power Extension Lead Cable

Skylarc Ref H200371

12-Metre 3-Phase 32A Power Extension Lead Cable.
4-Pin 32A 500V plugs.

Pallet of Industrial Stands

Skylarc Ref O200872

Assorted Stands

Haacon Jack

Skylarc Ref T201111

Model: S/DS989-232975 G
3 ton capacity
Two speed ranges

Haacon Jack

Skylarc Ref U201112

Model: S/DS989-232975 G
3 ton capacity
Two speed ranges

Haacon Jack

Skylarc Ref V201113

Model: S/DS989-232975 G
3 ton capacity
Two speed ranges

Haacon Jack

Skylarc Ref I201100

Model: S/DS989-232975 G
3 ton capacity
Two speed ranges

Haacon Jack

Skylarc Ref J201101

Model: S/DS989-232975 G
3 ton capacity
Two speed ranges

Haacon Jack

Skylarc Ref K201102

Model: S/DS989-232975 G
3 ton capacity
Two speed ranges

Haacon Jack

Skylarc Ref L201103

Model: S/DS989-232975 G
3 ton capacity
Two speed ranges

Haacon Jack

Skylarc Ref M201104

Model: S/DS989-232975 G
3 ton capacity
Two speed ranges

Haacon Jack

Skylarc Ref N201105

Model: S/DS989-232975 G
3 ton capacity
Two speed ranges

Haacon Jack

Skylarc Ref O201106

Model: S/DS989-232975 G
3 ton capacity
Two speed ranges

Haacon Jack

Skylarc Ref P201107

Model: S/DS989-232975 G
3 ton capacity
Two speed ranges

Haacon Jack

Skylarc Ref Q201108

Model: S/DS989-232975 G
3 ton capacity
Two speed ranges

Haacon Jack

Skylarc Ref R201109

Model: S/DS989-232975 G
3 ton capacity
Two speed ranges

Haacon Jack

Skylarc Ref S201110

Model: S/DS989-232975 G
3 ton capacity
Two speed ranges

28x Lifting Straps / Slings, 2-Ton Capacity

Skylarc Ref K200348

28x Lifting Straps / Slings.
Opened sample states 2-Ton Capacity, 1.5-metre length, 3-metre circumference, manufactured date of 01/2022.
The other Straps have not been tag inspected.
All appear to be likely unused but are dirty from open workshop storage.

GME VHF Marine Radio GX700, New

Skylarc Ref C200132

GME VHF Marine Radio GX700.
Item is new in box. Box exterior has some storage dust.
Also includes new in box GME GX series flush mounting kit MK008B.
See the GME websites below for further item specs:

https://www.gme.net.au/nz/fixed-mount-radios/gx700b/

https://www.gme.net.au/au/accessories/mk008b/

6-Piece Telescoping Gauge Set, 8-150mm Range

Skylarc Ref C200210

6-Piece Telescoping Gauge Set.
8-150mm Range.
Unknown manufacturer.

3.2-Ton Ratchet Lever Chain Block by Pacific Hoists

Skylarc Ref E176140

3.2-Ton Ratchet Lever Chain Block by Pacific Hoists.
10mm x28mm chain.
G80 alloy chain grade.

Heavy Duty Stainless Steel Mobile Table Workbench

Skylarc Ref X176133

Heavy Duty Stainless Steel Mobile Table Workbench.
5mm thick stainless top sheet.
75x75mm box stainless frame.
150mm diameter heavy duty castor wheels.

Heavy Duty Mobile Table Workbench

Skylarc Ref T176129

Heavy Duty Mobile Table Workbench.
2x detached 20mm plywood top sheets.
50x50mm box steel frame.
6x 150mm diameter castor wheels.

Heavy Duty Mobile Table Workbench

Skylarc Ref R176127

Heavy Duty Mobile Table Workbench.
20m plywood top.
100x100mm and 75x75mm stainless steel frame.
150mm castor wheels.

Small Anvil

Skylarc Ref P176151

Cast anvil
Has markings on side but can't read them

ROH Mechanical Hacksaw

Skylarc Ref O176150

ROH Mechanical Hacksaw
380mm blade length
Needs power cable
Made in Hastings

Pacific Laser Systems PLS5 Red Dot Laser Set

Skylarc Ref J176119

Pacific Laser Systems PLS5 Red Dot Laser Set.
Manufactured 08/2011.
See photos for included accessories.
Uses 3x AA batteries. Current installed batteries near depletion and will need replacing.

Pair of Horizontal Plate Clamps, 3200kg Capacity

Skylarc Ref Z176109

Pair of Horizontal Plate Clamps.
3200kg Capacity per pair.
Both are model DS-PPD.
Jaw opening 0-45mm.

3200kg Vertical Plate Clamp

Skylarc Ref X176107

3200kg Vertical Plate Clamp.
Unknown brand.
Jaw capacity 0-30mm.

3000kg Vertical Plate Clamp by Challenger

Skylarc Ref W176106

3000kg Vertical Plate Clamp by Challenger.
Model No.CCL113.
0-30mm jaw capacity

63mm Morse Taper No.5 Mill Drill Bit

Skylarc Ref T176103

Morse Taper Mill Drill Bit, 63mm Size.
Made by P&N Australia.
63mm diameter.
No.5 size shank.
460mm total length.
Condition - Does not appear to have been used but cannot verify. Surface rust spotting from storage.

4x Morse Taper No.5 Shank Drills

Skylarc Ref S176102

4x Morse Taper No.5 Shank Drills.
Sizes include:
- 2 1/32" with approx 120mm cutting depth.
- 2 1/8" with approx 200mm cutting depth.
- 2 1/16" with approx 120mm cutting depth.
- 1 1/2" with approx 175mm cutting depth.

Condition varies with each drill. All have been sharpened many times and/or have modified tips, see photos.

2x Titan Horizontal Plate Clamps, 3-Ton Capacity Combined

Skylarc Ref R174931

2x Titan Horizontal Plate Clamps.
3-Ton Capacity combined, 1.5-ton individually.
Jaw opening 0-50mm.

Enerpac Hollow Plunger Hydraulic Cylinder RCH123

Skylarc Ref V174909

Enerpac Hollow Plunger Hydraulic Cylinder.
Model No. RCH123.
12-Ton capacity.
700 BAR Max.
Made in USA.
185mm cylinder height.

Hilti Manual Adhesive Dispenser MD 2500

Skylarc Ref W174910

Hilti Manual Adhesive Dispenser MD 2500.
See photos for included accessories in case.

Enerpac Hollow Plunger Hydraulic Cylinder RCH123

Skylarc Ref X174911

Enerpac Hollow Plunger Hydraulic Cylinder.
Model No. RCH123.
12-Ton capacity.
700 BAR Max.
Made in USA.
185mm cylinder height.

Enerpac Hollow Plunger Hydraulic Cylinder RCH123

Skylarc Ref Y174912

Enerpac Hollow Plunger Hydraulic Cylinder.
Model No. RCH123.
12-Ton capacity.
700 BAR Max.
Made in USA.
185mm cylinder height.

Smithweld Welding Rod Oven S-5F, New

Skylarc Ref C200106

Smithweld Welding Rod Oven model S-5F.
Made in Australia.
5kg empty Oven weight.
240V single phase.
Oven approx 540mm long, 150mm outer diameter.
Internal dimensions are 475x100x85mm.
Temperature range from 30 to 180 degrees C.
Item is new unused, opened from original box for photos only. NOTE that the carboard box has exterior workshop storage wear.
See the manufacturer website below for further item details:
https://www.smithweld.com/product/s-5f-5-kg-portable-rod-oven/

Ramset DynaDrill SDS Plus Rotary Hammer DD544

Skylarc Ref H200111

Ramset DynaDrill SDS Plus Rotary Hammer.
Model No. DD544.
Includes case.
Tool is well used but motor sounds ok though not tested at length or under load.

2 x Large Welding Screens

Skylarc Ref F200057

Wilson Spectra welding screens on wheels

ROH Mechanical Hacksaw

Skylarc Ref A200000

ROH Mechanical Hacksaw
380mm blade length
Three phase
Needs plug
Made in Hastings

Makita Corded Angle Drill DA6301

Skylarc Ref P200119

Makita Corded Angle Drill model DA6301.
13mm Keyed chuck.
Steel carry case.

10x Combination Wrenches, Imperial & Metric Sizes

Skylarc Ref B200131

10x Combination Wrenches.
Includes 6x Tawianese made unbranded Wrenches in sizes of 2", 1 5/8", 1 3/8", 1 1/2" (2x), and 30mm.
Includes 4x Infar branded Wrenches in sizes of 1 1/4", 1 5/16", 32mm, and 30mm.
Condition varies with each tool.

9 x Work Stands

Skylarc Ref T200045

Work stands with roller tops
Screw adjustable height
Some need finishing

Makita Corded 230mm Angle Grinder 9069

Skylarc Ref O200144

Makita Corded 230mm Angle Grinder model 9069.
Includes side handle and disk changing tool.

Bosch Professional Corded 230mm Angle Grinder GWS 22-230 LV

Skylarc Ref P200145

Bosch Professional Corded 230mm Angle Grinder.
Model No.GWS 22-230 LV.
Includes side handle and disk tool.

Bosch Professional Corded 180mm Angle Grinder GWS 26-180 B

Skylarc Ref Q200146

Bosch Professional Corded 180mm Angle Grinder.
Model No.GWS 26-180 B.
Includes side handle.
Disk tool missing.

Bosch Corded Professional 240mm Angle Grinder

Skylarc Ref X200153

Bosch Corded Professional 240mm Angle Grinder.
Model No.GWS 24-240 LVI.
Includes side handle and disk tool.

Bosch Corded Professional 230mm Angle Grinder

Skylarc Ref Z200155

Bosch Corded Professional 230mm Angle Grinder.
Model No.GWS 24-240 LVI.
Includes side handle.
Disk change tool missing.
Non-original power cord.
Well used but operates, see video.

Bosch Professional 230mm Angle Grinder GWS 22-230 LV

Skylarc Ref H200163

Bosch Professional 230mm Angle Grinder model GWS 22-230 LV.
Includes side handle.
Disk tool is missing.

10-Ton Lifting Clutch

Skylarc Ref Q200172

10-Ton Lifting Clutch.
UniLift 10LK.

Makita Corded 230mm Angle Grinder M908

Skylarc Ref R200173

Makita Corded 230mm Angle Grinder model M908.
Includes side handle.
Disk tool is missing.

Bosch 18V Professional 165mm Circular Saw GKS 18 V-LI

Skylarc Ref U200176

Bosch 18V Professional 165mm Circular Saw model GKS 18 V-LI.
Tool only, battery and charger not included.
No batteries available in this workshop so tool is untested.

10-Ton Lifting Clutch

Skylarc Ref X200179

10-Ton Lifting Clutch.
UniLift 10LK.

10-Ton Lifting Clutch

Skylarc Ref Y200180

10-Ton Lifting Clutch.
UniLift 10LK.

Large Lifting Clutch

Skylarc Ref Z200181

Large Lifting Clutch.
Unsure of Lifting capacity.
Main component is 340mm long.

Heavy Duty Pipe Bender

Skylarc Ref Z200103

Custom pipe bender
1200mm tall pedestal stand
4 x stainless steel formers
Handle

Large Bin of Extension Cords

Skylarc Ref V200723

Assorted lengths

Long Three Phase Extension Cable

Skylarc Ref J200711

32 amp 5 pin plugs
Approx 15 metres

Bin of Strops

Skylarc Ref O200716

Assorted lifting and tie down strops
4 x New 6 metre 2 ton lifting strops

Heavy Duty Steel Workshop Cabinet

Skylarc Ref S200538

Single door, lockable but no key
Lifting eyes
5 levels
Castor wheels

Heavy Duty Steel Mobile Cupboard

Skylarc Ref I200528

Single door, lockable but no key
Lifting eyes
3 levels
Castor wheels
Hole in side
Integrated power board

Bosch Corded 230mm Angle Grinder GWS 25-230

Skylarc Ref S200200

Bosch Corded 230mm Angle Grinder model GWS 25-230.
Missing disk changing tool.

Rupes Corded 230mm Angle Grinder GP6

Skylarc Ref T200201

Rupes Corded 230mm Angle Grinder model GP6.
Disk changing tool is missing.

Bosch Professional Corded Reciprocating Saw

Skylarc Ref Z200207

Bosch Professional Corded Reciprocating Saw.
Model No.GSA 1300 PCE.
Saw appears as new unused but its plastic case shows some workshop damage, see photos.

Hitachi Corded Router M 12V2

Skylarc Ref E200212

Hitachi Corded Router model M 12V2.
See photos for included accessories.
Includes plastic case.

Makita 18V LXT Collated Screwdriver w/ 3.0Ah Battery

Skylarc Ref P200223

Makita 18V LXT Collated Screwdriver.
Model No.BFR550.
25-55mm.
Includes 2x spare drill bits, user manual, original box.
Includes 1x Makita 18V 3.0Ah, 54Wh Li-Ion Battery model BL1830.
Charger is missing.
Battery is depleted so we are unable to test.

2x Hella Marine Sea Hawk XL Black LED Deck Floodlights, New

Skylarc Ref X200231

2x Hella Marine Sea Hawk XL Black LED Deck Floodlights.
Both are Part No.2LT 980 950-001.
12W, 750 Lumens.
9-33V.
IP67
Lights are 170x58x68mm.
Both are new in unopened packaging. Some packaging dust from open workshop storage.

4x Load Binders, Unused

Skylarc Ref A200234

4x Load Binders.
Handle length 385mm.
See photos for capacity info
All appear unused.

XcelGas Gas Welding & Cutting Kit

Skylarc Ref F200239

XcelGas Gas Welding & Cutting Kit.
Carry case measures 580x250x215mm.
See photos for details on parts remaining in kit as some appear missing.
Many items in case appear unused.
Case exterior shows workshop storage wear.

2x Hella Marine Sea Hawk XL Black LED Deck Floodlights, New

Skylarc Ref G200240

2x Hella Marine Sea Hawk XL Black LED Deck Floodlights.
Both are Part No.2LT 980 950-001.
12W, 750 Lumens.
9-33V.
IP67
Lights are 170x58x68mm.
Both are new in unopened packaging. Some packaging dust from open workshop storage.

Weld-Tech Double-row Pipe Welding Clamp Assembly

Skylarc Ref S200252

Weld-Tech Double-row Pipe Welding Clamp Assembly.
Unknown model.
Clamp frame 230x105x185mm.
1-metre long, 120mm wide double chain.

2 x Heavy Duty Roller Tables

Skylarc Ref U200748

Each 1200mm long x 860mm wide x 660mm tall
750mm wide x 80mm diameter rollers
Steel frame
Screw adjustable feet

Large T Slot Table

Skylarc Ref A200754

Cast iron construction
35mm t slots

Bow Shackle, 35-Ton Capacity

Skylarc Ref E200264

Bow Shackle.
35-Ton Capacity.
55mm diameter pin.

Hiab Hydraulic Rams

Skylarc Ref V200775

1850mm long main ram
Approx 160mm diameter spear
2 x leveling legs
Was going to be used on hydraulic press project

5 x 2014 Ford Ranger Alloy Wheels

Skylarc Ref Y200778

Rim Diameter

18"

Rim Width

6.5"

Style

4WD/SUV

Bridgestone Dueler 265/65R18T 110T tyres
5 stud
Removed from vehicle when new

Buteline Bute Clamp Tool FR25, New

Skylarc Ref T200305

Buteline Bute Clamp Tool.
Model FR25.
Made in New Zealand.
485mm tool length.
New unused with original box.

Buteline Bute Clamp Tool FR20, New

Skylarc Ref U200306

Buteline Bute Clamp Tool.
Model FR20.
Made in New Zealand.
480mm tool length.
New unused with original box.

Predator 255mm Dual Slide Compound Mitre Saw

Skylarc Ref C200600

Predator 255mm Dual Slide Compound Mitre Saw
single phase

Single Phase Metal Cut Off Saw

Skylarc Ref W200282

Leabourn + Rose TE 250 DV
Single phase
250mm blade
0.9kW electric motor
Broken engine plate connecting coolant pump drive
Main switch missing top

Three Phase Metal Cut Off Saw

Skylarc Ref F200785

Unknown make and model
No blade
Approx 400mm max blade size
Mitre function
3 phase 32 amp 5 pin plug
Runs continuously, switch doesn't work
No blade

5 Tonne Chain Hoist

Skylarc Ref W200620

10mm Load Chain
5 Tonne W.L.L.

5 Tonne Chain Hoist

Skylarc Ref X200621

10mm Load Chain
5 Tonne W.L.L.

Fishing Chair w/ 3x Pole Holders

Skylarc Ref V200619

Fishing Chair w/ 3x Pole Holders.
Padded seat 500mm wide, 550mm above floor.
Aluminium tube frame.
Three pole holders with 38mm diameter inner capacity.
Sturdy well built fishing chair.

Milling Machine Indexing Head

Skylarc Ref C200808

ID Plate not found
300mm diameter chuck
Tailstock included

32x Lifting Straps / Slings, 2-Ton Capacity

Skylarc Ref L200349

32x Lifting Straps / Slings.
The one tag inspected unit indicates 2-Ton Capacity, 1.5m length, 3m circumference, manufactured date of 01/2022. All other units are not tag inspected.
Items appear to be unused but dirty from open workshop storage.

6-Metre 8-Ton Lifting Sling

Skylarc Ref P200353

6-Metre 8-Ton Lifting Sling.
Unknown brand.
Length is estimated as sling is zip tied.
120mm width.
Worn cloth tag seems to show 8-ton capacity?

6-Metre 8-Ton Lifting Sling

Skylarc Ref Q200354

6-Metre 8-Ton Lifting Sling.
Unknown brand.
Length is estimated as sling is zip tied.
120mm width.
Worn cloth tag seems to show 8-ton capacity?

Tanner Track Jack

Skylarc Ref P200639

Model: Tanner HHQD-30 Hydraulic Track Jack
30 ton capacity
160mm stroke
With box

Steel Dolly

Skylarc Ref Y200856

I-beam steel construction
4 heavy duty castor wheels

Assortment of Scaffolding Equipment

Skylarc Ref H200865

Assirtment of Scaffolding equipment

Tanner Track Jack

Skylarc Ref W201114

Model: Tanner HHQD-30 Hydraulic Track Jack
30 ton capacity
160mm stroke
With box

Press Brake Blade Tool

Skylarc Ref X201115

Approx 1800mm long x 150mm deep

6 x Curved Stands

Skylarc Ref V200853

Largest 2700mm wide curve
3 x 3050mm wide curve
2 x 925mm wide curve

2 x Roller Tables

Skylarc Ref S200850

2 x Roller Tables
2000mm long

Jet Engine Parts

Skylarc Ref Q200848

Assorted impellers and other engine parts of unknown turbines

Bosch Professional 230mm Angle Grinder GWS 22-230 LV

Skylarc Ref I200164

Bosch Professional 230mm Angle Grinder model GWS 22-230 LV.
Includes side handle.
Disk changing tool is missing.

Assorted 3-Phase Electrical Plugs, Sockets, Boxes

Skylarc Ref X200257

Assorted 3-Phase Electrical Plugs, Sockets, Boxes.
8x 3-Phase surface mounted socket boxes with 4-pin 32A, 500V plugs.
2x 32A, 500V female cable plug ends.
2x 4-gang mounting base boxes, 200x200x60mm.
1x 6-gang mounting base box 293x200x60mm.
Items appear unused but dusty from open workshop storage.

Mobile Table Workbench

Skylarc Ref S176128

Mobile Table Workbench.
5mm thick aluminium sheet top 950mm above floor.
35x35mm box steel frame.
150mm diameter castor wheels.
See photos for further design details.
Has been stored outside.

2x Titan Horizontal Plate Clamps, 1000kg Capacity

Skylarc Ref I176118

2x Titan Horizontal Plate Clamps.
Both with 1000kg lifting Capacity.
Jaw opening 0-30mm.
Both are new in factory sealed boxes.
Photo of opened clamp are indicative.

2x Titan Horizontal Plate Clamps, 1000kg Capacity

Skylarc Ref H176117

2x Titan Horizontal Plate Clamps.
Both with 1000kg lifting Capacity.
Jaw opening 0-30mm.
Both are new in factory sealed boxes.
Photo of opened clamp are indicative.

King Tony 1/2" Drive Torque Wrench, New

Skylarc Ref G176116

King Tony 1/2" Drive Torque Wrench.
Model No. 34423-1C.
10-150 ft-lbs, 13.6-203.3 Nm.
445mm tool length.
Tool is new in factory sealed packaging.
Photo of unpackaged wrench is indicative.

5x Irwin Vise-Grip Locking Chain Clamps, 225mm Size

Skylarc Ref F176115

5x Irwin Vise-Grip Locking Chain Clamps.
All are Model 20R, 225mm chain length.
Three are new in factory boxes, two more are used but excellent condition.
5x total vice Clamps in auction.

Permanent Magnetic Lifter, 300kg Capacity

Skylarc Ref D176113

Permanent Magnetic Lifter.
300kg Capacity.
Magnetic Base 165x90mm in size.
Operates, see last photo.

Permanent Magnetic Lift, 300kg Capacity

Skylarc Ref C176112

Permanent Magnetic Lift.
300kg Capacity.
Earth Chain branded.
Model ELM300.
Magnetic Base 155x90mm.
Functions.

Permanent Magnetic Lifter, 300kg Capacity

Skylarc Ref B176111

Permanent Magnetic Lifter.
Model.No.PML-3.
300kg Capacity.
Magnetic Base 165x90mm in size.
Operates, see last photo.

Hafco 2000kg Girder Trolley

Skylarc Ref A176110

Hafco 2000kg Girder Trolley.
Model No.HGT-2T.
Compatible beam width from 88mm to 203mm.
Shows light usage.

2x Beaver Vertical Plate Clamps, 1000kg Capacity

Skylarc Ref Y176108

2x Beaver Vertical Plate Clamps.
1000kg Capacity each.
Orange clamp is Type No.ABS-MC
Yellow clamp is Type No.ABS-DQ.
0-30mm jaw capacity.

Crescent Vintage 24", 600mm, Adjustable Wrench

Skylarc Ref V176105

Crescent Vintage 24", 600mm, Adjustable Wrench.
Made in USA.
Age unknown.
Jaws move but would benefit from a cleanup and lubrication.

2x Large D-Shackles

Skylarc Ref T174933

2x Large D-Shackles.
Unsure as to their lifting capacities.
Pin diameters are approx 46mm.
260mm total shackle lengths.

Bahco Dymamic Drive Combined Socket & Spanner Set S87+7

Skylarc Ref S174906

Bahco Dymamic Drive Combined Socket & Spanner Set S87+7.
All original parts appear to be included, see photos for verification.
Part condition varies from excellent to very good. Case exterior shows more moderate wear.

Hilti Manual.Adhesive Dispenser Set HDM500

Skylarc Ref F200109

Hilti Manual.Adhesive Dispenser Set HDM500.
See photos for included accessories.

Bosch 1" Drive Corded Impact Wrench GDS 30

Skylarc Ref G200110

Bosch 1" Drive Corded Impact Wrench GDS 30.
Missing side handle.
Includes 1x 24mm socket.
Includes non-original case.

Titan 3-Ton Universal Plate Clamp

Skylarc Ref Y200128

Titan 3-Ton Universal Plate Clamp.
Jaw opening 0-30mm.

100mm Dia Tilting Rotary Table by ToolMaster

Skylarc Ref I200138

100mm Dia Tilting Rotary Table by ToolMaster.
Code No.R0014.
100mm diameter table.
56mm height in flat position.
Tilts up to 90 degrees.
Item is unused but has surface rust from workshop storage.
See the website below for further item specs:
https://www.machineryhouse.co.nz/r0014

Record No.5 Benchtop Vice

Skylarc Ref J200139

Record No.5 Benchtop Vice.
Made in England.
125mm wide jaws.

2x 3-Ton Capacity Vertical Plate Clamps

Skylarc Ref L200141

2x 3-Ton Capacity Vertical Plate Clamps.
Yellow clamp is Wellculip model VC-30 clamp with 3-ton capacity and jaw capacity of 0-35mm.
Orange clap is missing ID plate but is nearly identical in design to yellow clamp so likely is a Wellculip brand clamp as well.
Both are rusty.

Bosch Corded 230mm Angle Grinder GWS 25'-230

Skylarc Ref F200161

Bosch Corded 230mm Angle Grinder model GWS 25'-230.
Includes side handle.
Disk changing tool is missing.

Bosch Corded 180mm Angle Grinder

Skylarc Ref C200184

Bosch Corded 180mm Angle Grinder.
Model GWS 23-180.
Missing disk tool and disk guard.
Includes side handle.

Kinchrome 0-100mm Outside Micrometer Set

Skylarc Ref D200211

Kinchrome 0-100mm Outside Micrometer Set.
4x Micrometers combined covering 0-100mm range.
Wood case shows workshop storage wear.

Vintage Brass Marine Compass by Saura Keiki Seisakusho Co

Skylarc Ref Q200250