Ulrich Aluminium 2.5M A Frame Ladder
SKYLARC’S DUNEDIN ENGINEERING CLOSURESkylarc Ref E118946
Ulrich Aluminium 2.5M A Frame Ladder.
2.5M max height as A-Frame.
9 Step Ladder.
Ulrich Aluminium branded.
Sold Price
$180
SKYLARC ASSET REALISATION
Save us as a favourite seller to keep up with all our online events
D.C.ROSS DUNEDIN WORKSHOP CLOSURE
Massive Precision Engineering Workshop Closure
Fine Blanking Presses, Fanuc CNC Robodrill, Fanuc CNC Wire Cuts, Lathes, Mills, Surface & Cylindrical Grinders, Drilling Machines, Precision Measuring Equipment, Huge Amounts of Tooling and Much More!
Showing 541–600 of 1,032 products
Skylarc Ref E118946
Ulrich Aluminium 2.5M A Frame Ladder.
2.5M max height as A-Frame.
9 Step Ladder.
Ulrich Aluminium branded.
Sold Price
$180
Skylarc Ref T117141
Pneumatic Die Grinder Set.
Bemato Air Tools Branded ¼ Inch Die Grinder.
25000 RPM, 90 Max PSIG.
Made in Taiwan.
Comes with kit of various parts, points etc.
See photos for more details.
Sold Price
$179
Skylarc Ref S117400
Iscar Face Mill Cutter HM90 F90A D 80-7-27.
Includes box.
Sold Price
$178.50
Skylarc Ref H118325
Model: Mitutoyo Absolute ID-S1012
Code No 543-681
0.01-12.7mm
Sold Price
$177
Skylarc Ref F117387
Iscar Indexable Thread Tap End Mill Cutter.
Type MTSR0021H21.
Includes a case of spare type MT21E 16UN IC928 indexes (2x units).
Condition - Mill Cutter appears unused, as new. Spare Indexes are as new.
Sold Price
$176
Skylarc Ref C118970
Industrial Horizontal Storage Racking.
Blue painted steel frame construction.
Could be used to store pipes and or sheet metals.
Outside post measurements: 1040mm x 880mm x 80mm.
Inside post height: 1150mm.
Total unit dimensions below:
Note this unit has been stored outside and aa such has minor to moderate surface rust.
Does NOT include the items in, on or around this unit.
Sold Price
$176
Skylarc Ref L117393
Iscar Indexable Tap Threader End Mill.
Type MTSR0012F14.
Includes 1x index unit in case, type MT14 I 2.50 ISO IC908.
Includes Hex Key tool.
Condition - End Mill appears unused but cannot verify. Index is as new in case.
Sold Price
$175.73
Skylarc Ref T118415
Model: Oetiker SB-80
Knipex 1089 crimper
Selection of pipe clamps
In case
Sold Price
$175.02
Skylarc Ref L118017
200mm diameter lathe chuck
Independent jaws
With key
Sold Price
$175
Skylarc Ref N117265
Iscar Tool Holder DIN69871 50 SEM27X61X300C.
Attachment is an Ingersoll 5W7M066R00, M3057323.
Sold Price
$174.73
Skylarc Ref I117260
Sandvik Tool Holder 392.14020-50 32 100.
Includes Kennametal attachment. Type is unknown as ID stamp is not visible, attachment approx 120mm long, 25mm diameter.
Sold Price
$174.73
Skylarc Ref U117584
4x NT35 Type Mill Tool Holders w/ Assorted Collets & More.
Unable to find a manufacturer mark.
Includes 10x long Collets in assorted Metric sizes.
Includes 7x short Collets, Unkmoen if compatible with Tool Holders?
Includes steel case 210x210x90mm.
See photos for further details on type of tool holders and other included components.
Sold Price
$174
Skylarc Ref I118404
4 x Boxes PL-5 6 stones
ML-5 6 stones
3 x SL-1 6 stones
PL-17 6 stones
PL-13
PL-7 6 stones
K20-J47 12 stones
Assorted partial boxes
Sold Price
$173.01
Skylarc Ref L118303
Unknown maker
0.061 -0.250
4 missing
In wooden case
Sold Price
$173
Skylarc Ref P117995
Sandvik S32U-CTFPR16
32mm shaft
Sold Price
$172
Skylarc Ref W118262
Large Assortment of Tools.
Collet wrenches, spanners, hex keys, spanners, hammers and mallets.
Please see photos for more info.
Sold Price
$172
Skylarc Ref A117408
4x 150mm to 200mm G Clamps.
Three units have approx 200mm inner gap, one unit has approx 150mm gap.
Unknown manufacturer.
All show typical moderate workshop wear.
Sold Price
$171
Skylarc Ref Q117996
Seco S32T-PTFNR16
32mm shaft
Sold Price
$171
Skylarc Ref R117165
Die Grinder Set.
12 piece die grinder set in wooden case by Pashby's Machinery LTD.
Sold Price
$170
Skylarc Ref K117132
Hitachi FDV 20VA Impact Drill.
20mm Concrete.
13mm Steel.
230V, 50/60Hz, 3.2A, 710W.
Sold Price
$169.66
Skylarc Ref H117181
Assortment Of Circlip Pliers (Stahlwille, Will).
1 x Stahlwille - Chrom Vanadium 85 - 165 Straight Circlip Pliers.
1 x Stahlwille - Chrom Vanadium 85 - 165 90° Circlip Pliers.
1 x Siochrome 175 Straight Circlip Pliers.
1 x Will 183/225 Straight Circlip Pliers.
2 x Unknkwn brand circlip pliers. (Red, Yellow).
1 x Knipex Vanadin small 90° circlip pliers
1 x Unknown Noga tool.
Sold Price
$169
Skylarc Ref M118668
Approx 50 square files
Many new
Assorted sizes
Sold Price
$168.50
Skylarc Ref Q118308
Model: Peak Scale Lupe 7x
7x magnification
In box with lenses
Sold Price
$168
Skylarc Ref F117569
14x Assorted Slitting & Gear Milling Cutter Blades, Imperial Sizes.
Assorted brands.
Includes one Sutton gear cutter type 8-12 2-3/4" 90degree x 1.
Includes one Sheffield straight tooth cutter type 5 x 5/32 x 1.
Includes 12x Assorted sizes of Slitting Cutters with diameters from 3" to 6" and thickness from 1/4" to 1".
Condition varies with each unit, some appear unused with boxes, others show varying use.
Sold Price
$168
Skylarc Ref J117131
Makita 4304T Top Handle, Orbital, Variable Speed Jig Saw.
230-240V, 2.6A, 50-60Hz, 600W.
Use with optional blade (B-16L) allows cutting up to 135mm thickness.
Tool speed can be adjusted between 500 and 3,000 strokes per minute by turning the adjusting dial.
Lock lever is positioned straight up, making for easy use from right or left.
Sold Price
$167
Skylarc Ref Y117952
Albrecht
1mm - 13mm
Morse taper no 2
Sold Price
$167
Skylarc Ref L117575
4x Assorted NT50 Type Mill Tool Holders.
One unit has a 13mm Jacobs Chuck branded chuck with key.
Another unit is stamped with 50-NS-40, 173587.
Remaining two units have no visible id marks.
See photos for further type details.
All appear to be older units.
Sold Price
$167
Skylarc Ref C117384
Kennametal Indexable Mill Coolant Drill.
Type DFS260R5WD32M
26mm diameter.
Includes spare index units.
Includes case.
Condition - Shows some use marks.
Sold Price
$167
Skylarc Ref L117133
Bosch GWS 24-180 LVI Professional Angle Grinder.
Rated input power 2,400.
W No-load speed 8,500 rpm.
Grinding spindle thread M 14.
Main handle Bow (rotating).
Disc diameter 180 mm Weight 5.4 kg.
Switch Protection.
Sold Price
$166
Skylarc Ref D118685
4 parallels
3 matched for thickness and width at 12mm x 44.7mm
1 12.1mm x 44.8mm
All different lengths but within a couple of mm 397mm long
Sold Price
$166
Skylarc Ref S117998
74 TM 40 Rd R
40mm shaft
Sold Price
$165
Skylarc Ref L117185
3 x 6mm end mills
2 x 6mm ball end mills
3 x 11mm ball end mills
16mm ball end mill
16mm roughing end mill
4 x 6mm corner end mills
Sold Price
$164.80
Skylarc Ref Y118706
Model: ALTLEDEL5110
Led light with folding stand
3 intensity levels
Mini USB charging
3 changers
Sold Price
$164.50
Skylarc Ref I118352
Approx 60 metric thread taps
2mm - 8mm
Assorted sizes
Mostly new
Sold Price
$164
Skylarc Ref J118275
Bulk Box of Assorted Drill Bits.
100+ Pieces. Primarily drill ends.
Various types.
3mm to 24mm.
Sold Price
$164
Skylarc Ref G118636
Mystery bin of large nuts and bolts
Bolts up to 20mm in diameter
Cap screws
And much more
Sold Price
$163
Skylarc Ref V117143
Snap-On Blue-Point AT810 3/8" Right Angle Rev Drill.
Reversible Drill.
Chuck Size: 3/8 Inch.
Sold Price
$162
Skylarc Ref Y117562
10x Assorted Convex Radius Mill Cutters, Imperial Sizes.
Nine units are Selson branded in the following sizes:
- 2x 13/32"
- 4x 5/16"
- 3x 3/16"
One unit has no visible markings.
All cuttter diameters are approx 113mm.
Condition varies with each unit.
Sold Price
$162
Skylarc Ref D117931
Solid timber top
40mm thick
2 x drawers and shelves
Contents not included
Sold Price
$162
Skylarc Ref K118328
Jinks 0-10mm on mount
Mitutoyo No. 2046F 0-10mm on custom stand
Mercer 0-10mm with top lever
Sold Price
$161
Skylarc Ref P117943
Solid timber top
40mm thick
920mm high worktop
Back board
Lower shelves with sliding doors
Includes contents of mill lockdown bolts
3 large steel risers
Sold Price
$161
Skylarc Ref O117214
4x Industrial Radius Gage Sets.
Unknown manufacturer for both units.
2x blue case Metric sets of 0.5mm to 13mm.
2x clear case imperial sets, one of 1/32 to 3/8 and one of 5/32 to 1/2.
Condition - cases show wear from workshop tool room. Gages appear good. One set is missing a Gage as marked on case.
Sold Price
$160
Skylarc Ref W117222
Mitutoyo Depth Micrometer.
Made in Japan.
Model number Unknown.
See photos for included components.
Includes wood case.
Case shows wear from workshop use.
Sold Price
$160
Skylarc Ref W117144
CP (Chicago Pneumatic) CP-860R Air Grinder.
Flex-collet chuck for 4" shank burrs and 22,000 RPM rated mounted stones.
Quiet rear exhaust. Only 84 dBA.
With facility to attach 78 dBA sound reducing hose.
FAST AND POWERFUL. 72 hp motor develops 22,000 RPM.
VERSATILE. Works well on metal, rubber & other materials.
COMPACT. 1¼ Lbs. and 5¾" long.
Sold Price
$160
Skylarc Ref D117723
11x Narrow Deep Hole Drill Bits.
Assorted brands.
Sizes range from 4mm to 6mm diameter.
Lengths from 110mm to 210mm.
All appear unused but cannot verify. Three units are without cases.
Sold Price
$160
Skylarc Ref Y118316
Model: 543-601
0.01 - 12mm capacity
Sold Price
$158
Skylarc Ref U117428
AroLube Workshop Wall Mounted Air Hose Reel.
Model No. ARR7115.
15-meter hose length.
Casing is approx 290mm diameter and 140mm wide.
Unit is missing its wall mount bracket!
Sold Price
$157
Skylarc Ref H117987
TOS IU200M1 lathe chuck
200mm diameter
Spare set of jaws
Key
Sold Price
$157
Skylarc Ref S118622
Mobile aluminium table
4mm thick top
Heavy duty wheels
Sold Price
$157
Skylarc Ref D117801
Iscar Indexible Mill Face Cutter w/ Spare Indexes.
Cutter type H490 F90AX D063-4-27-17.
Includes 8x extra indexes type H490 ANKX-170608PNTR IC830.
Condition - Cutter shows use and wear. Indexes are unused, index case shows Workshop Storage wear.
Sold Price
$157
Skylarc Ref G118012
40mm thick solid timber top
Shelves below
920mm high worktop
Sold Price
$157
Skylarc Ref Y117224
Insize Digital Caliper + 2x Insize Micrometers.
All Insize branded.
Includes:
- 150mm digital caliper model 1108-150.
- 2x 0-25mm Micrometers, both model 3203-25A.
All include plastic cases.
Cases show exterior Workshop grime and wear.
Sold Price
$156.93
Skylarc Ref Y117198
Reamers : 3/4", 1 1/4", 26.6mm, 15/16", 24.6mm, 20mm, 12mm, 8.5mm, 15/32", 15mm, 22mm, 11mm, 9mm
Assorted small reamers 5 morse taper adapters
5 x counter bores
Sold Price
$156.12
Skylarc Ref S117556
19x Assorted Finish, Rounded Edge, & Square End Mill Bits.
Assorted brands.
Assorted Imperial Sizes from 7/16" to 5/8".
Condition varies with each unit.
Sold Price
$156
Skylarc Ref T117375
26x Assorted Tapered End Mills.
Assorted angles and sizes.
Assorted brands.
Taper angles range from 1 degree to 20 degrees.
Shank diameters range from 6mm to 16mm.
Condition - Most appear to be unused or were very lightly used. Case shows storage wear.
Sold Price
$156
Skylarc Ref Y117380
Sandvik Coromant Varilock Indexible Coolant Mill Drill.
Type C5-R416.1-0500-205.
Shows generally mild use marks.
Sold Price
$156
Skylarc Ref S117166
Sutton Gamflex No.14 Holesaw Set.
Missing one piece.
Please see final photo for holesaw sizes.
Sold Price
$155.01
Skylarc Ref M117550
12x Assorted Gear Mill Cutters.
Assorted brands and sizes, see photos.
Condition varies with each unit.
Sold Price
$155
Skylarc Ref B118397
Mainly Clarkson brand
7 are new
Sizes include: 1", 7/8", 5/8", 19/32", 15/32", 15/32", 1/2", 13/32", 13/32"
Sold Price
$154
Skylarc Ref Z117173
Assorted Lot of Various Hammers and Mallets.
4 x Aluminum Mallet/Hammer.
3 x Snap-On Blue-Point Rubber Mallets.
1 x Ball Point Hammer.
1 x Claw Hammer (broken).
1 x Mallet Hammer.
Sold Price
$153