← Back to Auctions

Rayners Event

Auction Ended

Showing 181–240 of 977 products

Large Flatbed Trolley Sold Trade Me

Sold on: 10 Dec 2019

Large Flatbed Trolley

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref H114555

Heavy duty steel frame
Timber platform deck
Heavy duty wheels

Sold Price

$128

View Listing
22x 150mm Intumescent Fire Dampers for Commercial Ventilation Systems Sold Trade Me

Sold on: 10 Dec 2019

22x 150mm Intumescent Fire Dampers for Commercial Ventilation Systems

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref L114871

22x 150mm Intumescent Fire Dampers for Commercial Ventilation Systems.
Kilargo branded.
All 22x units are IFDO-Hi Flo series model No. IFDO-150HF.
Manufactured 2015.
150mn diameter by 360mm length.
Includes a box of mounting brackets.
Leftover warehouse stock.

Sold Price

$126

View Listing
2-Ton Chain Lifting Block Sold Trade Me

Sold on: 10 Dec 2019

2-Ton Chain Lifting Block

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref J115181

Chain Lifting Block.
No ID label on casing so brand, model, specs Unknown.
Both hooks are marked as 2 Ton capacity.
Chain length Unknown.
Unit shows wear from use. Some casing dents. Chain is rusty.

Sold Price

$126

View Listing
125mm Benchtop Workshop Vice Sold Trade Me

Sold on: 9 Dec 2019

125mm Benchtop Workshop Vice

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref I115102

125mm Benchtop Workshop Vice.
Unknown brand/model as ID plate is missing.
125mm wide top Jaws.
Lower pipe jaws.
Mounted on a 1510x300x55mm wood board.

Sold Price

$126

View Listing
S&P Duct Fan Sold Trade Me

Sold on: 10 Dec 2019

S&P Duct Fan

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref W115610

Model: S&P TD2000/315
315mm diameter
Single phase
255 watt

Sold Price

$124

View Listing
Youngs Three Phase Mig Welder Sold Trade Me

Sold on: 9 Dec 2019

Youngs Three Phase Mig Welder

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref C114914

Model: Youngs Transpak 180
150 amp rated output
Integrated wire feed
Part roll of wire
On wheels

Sold Price

$123

View Listing
Toshiba DLP Digital Projector TDP-S20 Sold Trade Me

Sold on: 10 Dec 2019

Toshiba DLP Digital Projector TDP-S20

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref M114768

Toshiba DLP Digital Projector
Model No. TDP-S20
Version 1600-1300
Lamp hours - 1599 hours.
Includes power cable and RCA cable.
Note - Remote control unit is missing!
Condition - Exterior casing scratches and marks. Projector Apoears to operate normslly.
Note - The rainbow colours seen in the two photos of the projected menu are a result of our mobile camera being out of sync with the projector. The projector does project properly with normal colours though our camera would not let us photo that properly

Sold Price

$122.85

View Listing
2-Ton 2.5m Chain Lifting Block Sold Trade Me

Sold on: 9 Dec 2019

2-Ton 2.5m Chain Lifting Block

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref K115182

Chain Lifting Block
Unknown brand.
2 Ton capacity.
2.5m Chain length.

Sold Price

$122

View Listing
Ulrich Aluminum A-Frame Step Ladder (2.5m) Sold Trade Me

Sold on: 8 Dec 2019

Ulrich Aluminum A-Frame Step Ladder (2.5m)

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref E115072

Ulrich Aluminum A-Frame Step Ladder (2.5m).
Ulrich branded A-Frame aluminum step ladder.
Maximum height of 2.5 meters.
Could not find capacity rating.
See photos for more details.

Sold Price

$121

View Listing
Assorted Handtools Sold Trade Me

Sold on: 9 Dec 2019

Assorted Handtools

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref E115488

Assorted Handtools.
On/Off waterbrush, shovel, broom, 3 x buckets, scraper tool, stakes etc..
See photos for more details.

Sold Price

$121

View Listing
5x Commercial Building Exterior Ventilation Intake Exhaust Covers Sold Trade Me

Sold on: 10 Dec 2019

5x Commercial Building Exterior Ventilation Intake Exhaust Covers

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref S114878

5x Commercial Building Exterior Ventilation Intake Exhaust Covers.
Includes the following sizes:
- 745x595x105mm.
- 1820x 1090x95mm.
- 1380x1090x95mm.
- 1800x1080x90mm
- 1780x810x95mm
All appear used. Some show surface rust.

Sold Price

$119

View Listing
Stylish Gas Inset Fireplace Unit by Heat & Glo Sold Trade Me

Sold on: 8 Dec 2019

Stylish Gas Inset Fireplace Unit by Heat & Glo

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref A115146

Stylish Gas Inset Fireplace Unit.
Made in USA by Heat & Glo.
Model No. Supreme-N-130AU.
Natural gas fueled only.
Manufactured 6/7/16.
Requires wall opening approx 735mm wide, 360mm deep, 500mm high.
Front facia is 1015mm wide, 35mm thick, 715mm high.
Condition - Unit has been used as a static showroom display unit. Has not been operated. Some giborad dust from showroom wall. Some marks on front facia from customer fingers. Note that lower panel that covers electrical components appears to be missing.

Sold Price

$118.75

View Listing
John Heine C Frame Power Press Sold Trade Me

Sold on: 10 Dec 2019

John Heine C Frame Power Press

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref F115905

Model: John Heine 202A Series 2
15 ton press capacity
Three phase
1hp motor
Inclinable
Foot controlled

Sold Price

$116

View Listing
UWE 30kg Benchtop Digital Weight Scale Sold Trade Me

Sold on: 10 Dec 2019

UWE 30kg Benchtop Digital Weight Scale

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref I114842

UWE 30kg Benchtop Digital Weight Scale.
Model No. AXM-30K.
Minimum weight 200g, max weight 30kg.
10g incriments
Stainless Steel removable top plate approx 250x215mm.
Removable transparent protective plastic cover of scale body.
Includes power adapter cable.
Condition - Protective plaftic cover shows wear and some tears. Scale operates but has not been tested for accuracy. Tape measure seen in photos is not included.

Sold Price

$115

View Listing
Oxy Acetylene Welding Torch w/ Hose and Regulators Sold Trade Me

Sold on: 9 Dec 2019

Oxy Acetylene Welding Torch w/ Hose and Regulators

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref S115138

Oxy Acetylene Welding Torch w/ Hose and Regulators.
Cigweld CutSkill branded torch.
BOC 8000 branded Oxy and acetylene Regulators.
Set shows typical industrial wear and use.

Sold Price

$115

View Listing
Huge Assortment Of PVC Joints Sold Trade Me

Sold on: 10 Dec 2019

Huge Assortment Of PVC Joints

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref V115557

Huge Assortment Of PVC Joints.
3 Galvinised trays of various PVC joiners.
90°, 45°, Tee shaped, joiners of various sizes.
Pipe clamps of various sizes.
Well over 200 pieces.
Please note that although 5 galvanised trays are shown in photos only 3 are included in this lot.
See photos for more details.

Sold Price

$114

View Listing
Tray of various SPK rifeng press fit pipe fittings. Sold Trade Me

Sold on: 9 Dec 2019

Tray of various SPK rifeng press fit pipe fittings.

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref Y115560

Tray of various SPK rifeng press fit pipe fittings.
Sizes and QTY listed below for larger qty items:
Tee Fittings:
1 x 16 - 16-16mm: 5
1 x 16 - 20-20mm.
90° Elbow Fittings:
17 x 16 - 16mm.
4 x 16mm press-fit - 20mm female thread.
1 x 16mm press-fit - 15mm male thread.
1 x 20 - 20mm
1 x 16mm press-fit - 20mm female threaded ball-joint.
Straight through fittings:
5 x 16mm press-fit - 20mm female thread.
3 x 16mm press-fit -15mm male thread.
3 x 16-16mm.
2 x 16mm - cap.
2 x 20mm press fit - 20mm female thread.
1 x 20mm press-fit - 15mm male thread.
Also includes many other couplings, caps, straight throughs, valves etc.
See photos for more details

Sold Price

$114

View Listing
Makita 300W Corded Nibbler Sold Trade Me

Sold on: 9 Dec 2019

Makita 300W Corded Nibbler

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref E115670

Makita 300W Corded Nibbler.
Model No. JS1600.
300W.

Sold Price

$114

View Listing
2x Steel Workshop or Office Shelving Units Sold Trade Me

Sold on: 10 Dec 2019

2x Steel Workshop or Office Shelving Units

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref Q114746

2x Steel Workshop or Office Shelving Units.
Adjustable screw on shelves.
Each unit is approx 930mm wide, 480mm deep, 2140mm tall.

Sold Price

$113

View Listing
Sold Trade Me

Sold on: 10 Dec 2019

Stainless Steel Flue Cap and Adapter

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref N115393

Flue cap and flue adapter
150mm internal and 300mm external
Two part

Sold Price

$113

View Listing
5 x Assorted Aluminum Vent Grilles Sold Trade Me

Sold on: 9 Dec 2019

5 x Assorted Aluminum Vent Grilles

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref Q115084

5 x Assorted Aluminum Vent Grilles.
1 x Grey powdercoated aluminum vent grille - 805mm x 505mm x 25mm
4 x White powdercoated aluminum vent grille - 900mm x 600mm x 30mm.
See photos for more details.

Sold Price

$112.50

View Listing
Assorted Lot Of Butterfly Valves Sold Trade Me

Sold on: 9 Dec 2019

Assorted Lot Of Butterfly Valves

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref X115507

Assorted Lot Of Butterfly Valves.
1 x Heaton Valves UK Branded. Size: 4" Model No: 7F-730, Class: ISO PN16, Temp: -20 - 120°C, Body: A126B, Mop: PN16, Disc CF8M, Stem: F6A, Liner: EPDM, Flange: 150LB/AS.TE - Butterfly Valve.
5 x Heaton Valves UK Branded. Size: 2.5°, Model No: VF-733, Class: ISO PN16, Temp: -20 - 120°C, Body: A536, Mop: PN16, Disc: CF8M, Stem: F6A, Liner: EPT, Flange: AS.T.F - Butterfly Valve.
1 x CV: Body: CI, Disc: CF8M, Seat: EPDM, Stem: SS41, CW/P: 16Bar, FLG: BSTE, Model: 2600 - Butterfly Valve
See photos for more details.

Sold Price

$112

View Listing
Assorted Lot PVC Plumbing Connectors, Elbows, Couplings & More Sold Trade Me

Sold on: 9 Dec 2019

Assorted Lot PVC Plumbing Connectors, Elbows, Couplings & More

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref N115679

Assorted Lot PVC Plumbing Connectors, Elbows, Couplings & More.
A wide variety of units. Diameters range from 20mm up to 100mm.
Includes 3x new sink basket waste reducer units.
See photos for further details on what is included.
Exact total count of individual units is unknown. Rough estimate of 200+ units.
Leftover warehouse supply stock. Some dust from storage.

Sold Price

$112

View Listing
Bulk Lot of Assorted Plumbing Pipe Clamps Sold Trade Me

Sold on: 9 Dec 2019

Bulk Lot of Assorted Plumbing Pipe Clamps

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref M115184

Bulk Lot of Assorted Plumbing Pipe Clamps.
Assorted sizes. Some with black plastic inner sleeves, done without.
Inner dimensions are approx 25mm, 30mm, 35mm, 45mm varieties.
Exact count of each size is unknown. Rough estimate of at least 150+ clamps in total.
Includes Galvanised Steel bin 400x400x200mm.
Leftover warehouse bulk stock.

Sold Price

$111.60

View Listing
17x Commercial Ducting Insulation Sheets, 2400x1200x30mm Size Sold Trade Me

Sold on: 10 Dec 2019

17x Commercial Ducting Insulation Sheets, 2400x1200x30mm Size

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref T114879

17x Commercial Ducting Insulation Sheets, 2400x1200x30mm Size.
Unknown brand.
See photos for insulation type details.
Includes about 17x full 2400x1200x30mm size sheets.
Includes around 7x assorted size smaller offcut sheets of same type and thickness.
Includes a large offcut sheet of 50mm thick insulation of same type and is approx 1500x1400mm, see photos.
Condition - Leftover warehouse stock. 50mm thick sheet is dirty, 30mm sheets are as new showing just light dust etc.

Sold Price

$111

View Listing
Ulrich Aluminum Easylift Step Ladder Sold Trade Me

Sold on: 10 Dec 2019

Ulrich Aluminum Easylift Step Ladder

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref T115035

Ulrich Aluminum Easylift Step Ladder.
180KG Rated Capacity
A-Frame Design.
Max step height: 1.9M
See photos for more details.

Sold Price

$111

View Listing
170 Metre Coil of 10mm PEX-AL-PEX Water Pipe Sold Trade Me

Sold on: 9 Dec 2019

170 Metre Coil of 10mm PEX-AL-PEX Water Pipe

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref Z115535

170 Metre Coil of 10mm PEX-AL-PEX Water Pipe.
Length is based on markings on pipe but not verified.
See photos for more details.

Sold Price

$110

View Listing
Large Heavy Duty Wooden Workbench w/ Attached Vice Sold Trade Me

Sold on: 10 Dec 2019

Large Heavy Duty Wooden Workbench w/ Attached Vice

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref X115143

Large Heavy Duty Wooden Workbench w/ Attached Vice.
Thick 40mm wood board top with heavy wood frame.
Includes attached Record brand model No. 6 Benchtop vice with 150mm Jaws.
Wood board lower shelf.
Condition - Shows typical moderate wear and use for an older unit. Some cracks, drilling holes and heavy wear marks in wood. Both rear vertical Support beams show moderate borer holes. Minor or or no borer elsware on Workbench.

Sold Price

$110

View Listing
Tray of various SPK rifeng press fit pipe fittings. Sold Trade Me

Sold on: 9 Dec 2019

Tray of various SPK rifeng press fit pipe fittings.

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref A115562

Tray of various SPK rifeng press fit pipe fittings.
Sizes and QTY listed below:
Elbow Fittings:
16mm: 1.
20mm: 66.
25mm: 4.
32mm: 2.
Tee Fittings:
25mm: 1.
20mm: 1.
25mm/20mm/25m: 1.
20mm/16mm/16mm: 1.
Also includes other miscellaneous sizes/shapes.
See photos for more details

Sold Price

$109.01

View Listing
1x Sheet of Galvanised Steel, 3000x1530x2mm Sold Trade Me

Sold on: 8 Dec 2019

1x Sheet of Galvanised Steel, 3000x1530x2mm

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref J114843

1x Sheet of Galvanised Steel, 3000x1530x2mm.
Leftover warehouse stock.
Small dent along edge, see photo.

Sold Price

$109

View Listing
HIT Branded Rod Cutter/Threader Sold Trade Me

Sold on: 9 Dec 2019

HIT Branded Rod Cutter/Threader

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref M115600

HIT Branded Rod Cutter/Threader.
Handle length 650mm.
Can be mounted to desk etc.
See photos for more details.

Sold Price

$108

View Listing
Custom Galvanised Steel A4 Size Wall Mount Bins for Office or Workshop Sold Trade Me

Sold on: 9 Dec 2019

Custom Galvanised Steel A4 Size Wall Mount Bins for Office or Workshop

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref C115668

Custom Galvanised Steel A4 Size Wall Mount Bins for Office or Workshop.
Custom in house made system.
Bare Galvanised Steel construction with folded edges on bins for safety.
42 individual bins mounted six bins to a Galvanised wall panel. Each bin is approx 230mn long, 30mm wide, 80mm deep.
Each 6-bin wall panel is 300x1220mm.
Auction will Include top name panel and side "priority" panel.
Would be great of workshop job organising, material filing, or make a great retro industrial look to an office for A4 Paper filing or other such uses.

Sold Price

$108

View Listing
7 x Sections of Flue Sold Trade Me

Sold on: 10 Dec 2019

7 x Sections of Flue

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref R115007

4 x double layer flues
250mm outer diameter, 200mm inner diameter
1220mm long
3 x 170m diameter x 1220mm long flue sections
All galvanised steel

Sold Price

$107

View Listing
Sold Trade Me

Sold on: 10 Dec 2019

San Hang Pneumatic Rivet Gun

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref M115444

San Hang Pneumatic Rivet Gun.
Model. QLM - CH - 3.
Includes gun and hose/connector.
See photos for more details.

Sold Price

$105.57

View Listing
Cebora Plasma Cutter Sold Trade Me

Sold on: 8 Dec 2019

Cebora Plasma Cutter

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref A114912

Model: Cebora Plasma Prof52
Three phase
Missing torch

Sold Price

$105

View Listing
5 x Galvanised Double Layer Flues Sold Trade Me

Sold on: 9 Dec 2019

5 x Galvanised Double Layer Flues

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref O115004

Sections of flue
1220mm long
250mm outer diameter
200mm inner diameter
With spacers

Sold Price

$105

View Listing
Swivel Pipe Bench Vice Sold Trade Me

Sold on: 9 Dec 2019

Swivel Pipe Bench Vice

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref Y115924

125mm jaws
Pipe jaws underneath (missing two jaws)
Swivel base
Swivel body

Sold Price

$105

View Listing
Sold Trade Me

Sold on: 10 Dec 2019

Stainless Steel Flue Cap and Adapter

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref Z115015

Flue cap and flue adapter
150mm internal and 300mm external
Two part

Sold Price

$104

View Listing
Grundfos Three Phase Pump Sold Trade Me

Sold on: 9 Dec 2019

Grundfos Three Phase Pump

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref Z115951

Model: grundfos tp 80-150/4 a-f-b-bqqe
Grundfos IE2-IE3 MG100LC4-28FF215-H3 pump motor
80mm pump outlets with 160mm adapters

Sold Price

$104

View Listing
Sunroc Just Water Office Refrigerated Water Dispenser Sold Trade Me

Sold on: 8 Dec 2019

Sunroc Just Water Office Refrigerated Water Dispenser

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref H114893

Sunroc Just Water Office Refrigerated Water Dispenser.
Model No. CRB1.
Total unit height including water bottle is approx 1320mm.
Oldee unit that has been used in a warehouse lunch room. Some yellowing to plastic. Appears to operate. Water has been drained from unit.

Sold Price

$103

View Listing
12 x Commercial Extractor Fan Filters Sold Trade Me

Sold on: 10 Dec 2019

12 x Commercial Extractor Fan Filters

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref T115633

10 x stainless steel restaurant extractor filters
495mm x 395mm x 45mm
2 x aluminium extractor filters
495mmx 395mm x 50mm

Sold Price

$103

View Listing
Bailey 1.2m Aluminium Step Ladder Sold Trade Me

Sold on: 10 Dec 2019

Bailey 1.2m Aluminium Step Ladder

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref R115683

Bailey 1.2m Aluminium Step Ladder.
Unknown model number.
120kg weight capacity.
1150mm high when set up.

Sold Price

$103

View Listing
Ullrich 2.4m Aluminium Step Ladder Sold Trade Me

Sold on: 10 Dec 2019

Ullrich 2.4m Aluminium Step Ladder

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref Z115691

Ullrich 2.4m Aluminium Step Ladder.
Made in NZ.
Model number label is missing.
Height in step ladder configuration is approx 2270mm.
Height in extension configuration is approx 4500mm

Sold Price

$103

View Listing
VacMaster 1500W Wet Dry Shop Vacuum Cleaner Sold Trade Me

Sold on: 10 Dec 2019

VacMaster 1500W Wet Dry Shop Vacuum Cleaner

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref K114896

VacMaster 1500W Wet Dry Shop Vacuum Cleaner.
Model No. VMVK1520SIWC.
20L tank capacity.
Most original attachments are missing, see photos.

Sold Price

$102.31

View Listing
8 x WOG Ball Joint Valves Sold Trade Me

Sold on: 9 Dec 2019

8 x WOG Ball Joint Valves

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref F115515

8 x WOG Ball Joint Valves.
8 x 1 ¼" CF8M 1000WOG 3x6J8G - 4X800G WOG Ball Joint Valves.
See photos for more details.

Sold Price

$102.07

View Listing
7 x Exterior Vent Grille Sold Trade Me

Sold on: 8 Dec 2019

7 x Exterior Vent Grille

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref T114671

7 x Exterior Vent Grile.
4 x Black coloured aluminum vent grille with adjustable fins - 480mm x 280mm x 40mm.
2 x Dark brown coloured aluminum vent grille - 445mm x 300mm x 40mm.
1 x White coloured aluminum vent grille - 450mm x 250mm x 45mm.

Sold Price

$102

View Listing
Assorted Chimney Flue Tops & Other Components Sold Trade Me

Sold on: 9 Dec 2019

Assorted Chimney Flue Tops & Other Components

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref C114784

Assorted Chimney Flue Tops & Other Components.
Includes:
- 3x chimney top units for 125mm diameter Flues.
- 2x chimney top units for 200mm diameter Flues.
- 4x other units that appear to be custom made, two appear to be inferior design Flue Tops, other two are of Unknown purpose. See photos.
All are stainless steel construction.
Leftover warehouse stock.

Sold Price

$102

View Listing
Mitsubishi BM BACnet Interface Adapter BAC-HD150 Unit Sold Trade Me

Sold on: 9 Dec 2019

Mitsubishi BM BACnet Interface Adapter BAC-HD150 Unit

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref K114870

Mitsubishi BM BACnet Interface Adapter for Commercial Air Conditioner control Systems.
Model No. BAC-HD150.
Version - 2.10.
See photos of ID labels for further spec details.
Includes instalation manual, CD driver Disk, original box.
Leftover warehouse stock.
See the Mitsubishi Web link below for more info:
http://www.mitsubishi-electric.co.nz/citymulti/i/69425/bac-hd150-bms-interface

Sold Price

$101

View Listing
Aspira 115L Refrigerator Sold Trade Me

Sold on: 9 Dec 2019

Aspira 115L Refrigerator

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref F114891

Aspira 115L Refrigerator.
Model No. TWLRZ-100.
Toral gross volume 115L.
Total.storage volume 92L
Total cool zone volume 14L.
Was used in a warehouse lunch room. Appears well maintained. Operates normally.

Sold Price

$101

View Listing
L-Shaped Corner Office Desk Workstation Sold Trade Me

Sold on: 8 Dec 2019

L-Shaped Corner Office Desk Workstation

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref P114745

L-Shaped Corner Office Desk Workstation.
Laminated MDF construction.
Faux Wood top with black sides.
Includes monitor stand.

Sold Price

$101

View Listing
ViewSonic 23-Inch IPS LED Computer Monitor Sold Trade Me

Sold on: 8 Dec 2019

ViewSonic 23-Inch IPS LED Computer Monitor

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref G114762

Size
23" - 24.9"

ViewSonic 23-Inch IPS LED Computer Monitor.
Model No. VX2370Smh-LED.
IPS type screen with 1930x1080 resolution.
HDMI, DVI, VGA video inputs.
Includes power adapter cable and DVI cable with DisplayPort adapter on one end.

Sold Price

$101

View Listing
Lot of Steel Ducting Body Edging Trim in 6000mm Lengths Sold Trade Me

Sold on: 9 Dec 2019

Lot of Steel Ducting Body Edging Trim in 6000mm Lengths

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref E114786

Lot of Steel Ducting Body Edging Trim.
Exact number of lengths is Unknown, rough extimate of at least 60x lengths.
Each length is 6000mm.
Leftover unused warehouse supply stock.
Note - Auction is for strapped bundle of edging lengths seen in photos only, rack and other piping and lengths of material seen in photos are not included.

Sold Price

$101

View Listing
Heavy Duty Workshop Material Supply Rack Sold Trade Me

Sold on: 8 Dec 2019

Heavy Duty Workshop Material Supply Rack

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref G114788

Heavy Duty Workshop Material Supply Rack.
Heavy steel centre column with 600m long horizontal material Support bars on one side. Other side has been added with a custom angled steel tube Support bar 350mm in length.
Approx total dimensions of Whole rack unit is approx 4800mm in length, 1220mm width, 1950mm in height.
Note - Auction is for rack unit only, material on and around rack in photos is not included.

Sold Price

$101

View Listing
Box of Carlisle Dial-A-Matic Sets Sold Trade Me

Sold on: 8 Dec 2019

Box of Carlisle Dial-A-Matic Sets

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref F114579

Dynair Carlisle Dial-A-Matic Set
1/4“
10 bags of 10 units
Part number 308003

Sold Price

$100

View Listing
2 Trays of HVAC Components Sold Trade Me

Sold on: 8 Dec 2019

2 Trays of HVAC Components

SKYLARC’S DUNEDIN HVAC WORKSHOP CLOSURE AUCTION

Skylarc Ref Q114902

2 x galvanised bins
610mm long x 305mm wide x 200mm tall
10 packs of 10 Dial-A-Matic 1/4" sets
Bag of camlock sets #1283
7 x 235mm flaps
2 packs of flap hinges
Large box of flap locks
Plastic duct corners

Sold Price

$100

View Listing
Show 60 240 All per page