Reamer Pilot Set
SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTIONSkylarc Ref I125657
Warren and Brown Reamer Guides
Set of 9
One incomplete
In case
Sold Price
$355
Showing 121–180 of 830 products
Skylarc Ref I125657
Warren and Brown Reamer Guides
Set of 9
One incomplete
In case
Sold Price
$355
Skylarc Ref D125704
BW Tech Gas Alert MicroClip XL Gas Detector.
Includes charging adapter and original box.
Unit indicates that it needs calibration, see photos.
Shows typical industrial wear and usage.
Sold Price
$355
Skylarc Ref J126100
29M 3 Phase 32Amp Extension Lead.
Sold Price
$355
Skylarc Ref H125994
Makita HP2010N 13mm 2‑Speed Hammer Drill.
Make: Makita
Model: HP2010N
Amps: 3.3A
Voltage:
Hz: 50/60
Watts: 750
2300RPM No Load Speed.
Includes carrying case, chuck key and various drill bits - see photos.
Sold Price
$355
Skylarc Ref C125885
Alco Industrial Aluminium Extension Ladder.
Made in NZ.
Length from 4.90m to 8.5m.
130kg max load capacity.
Sold Price
$355
Skylarc Ref K125659
Moore and Wright Square
530mm x 260mm
With wooden case
Sold Price
$350
Skylarc Ref X125828
20x Assorted Industrial Fibreglass Grated Flooring Panels.
Assorted sizes, longest approx 3650mm, widest approx 1220mm.
Thicknesses vary from 15mm to 40mm.
Wide variety of sizes and shapes.
Sold Price
$349
Skylarc Ref S126317
Antique Workshop Press.
Unknown manufacturer and age.
Geared press bar approx 290mm long.
See photos for further details on design and condition of unit.
Sold Price
$348.50
Skylarc Ref U125227
1250kg Capacity Folding Engine Crane.
SCA branded.
500kg, 750kg, 1000kg, and 1250kg beam length settings
Includes a second longer set of base soppirt beams (Note that one beam is missing its wheel).
Crane shows typical workshop wear and usage. Crane hydraulics operate but not tested under load.
Sold Price
$346
Skylarc Ref S126213
Pallet of Assorted Nuts, Bolts, Washers, & Other Fastening Hardware.
Also includes assorted threaded rod, lengths of chain, brass fittings, clamps, screws, etc.
Includes assorted sizes of Lamson branded plaftic parts bins plus 3x wall mounted steel boards for mounting some bins.
See photos for further details on Included items.
Condition varies with each item. Most are unused, some show usage.
Sold Price
$346
Skylarc Ref Y125985
Sandvik Coromant 880-D3400L40-02 Insert Drill.
Sold Price
$345
Skylarc Ref N126286
Massive Antique Collection of Model Engineer Magazine, 1930 to 1991.
Thousands of Model Engineer Magazines, appears to possibly be a complete, or very near complete, collection of every publication from January 2nd 1930 to January 3rd, 1991. Way to many to count or verify exact number.
Also a number of extra copies of various years as well.
Obviously we can't inspect every copy but overall it appears they were stored upon puchace as most that we inspected appeared in excellent condition, though many of the 1930's and 40's have rusty staples and mild frayed edges.
Includes Precision branded 5-drawer storage cabinet.
A excellent likely complete collection for a museum or antique magazine Collector.
Sold Price
$340.20
Skylarc Ref Y125621
Sandvik Coromant
C4-STFCR-11070-11
Sold Price
$336
Skylarc Ref E125991
Fiac Single Phase Air Compressor.
10/145 max Bar/PSI.
257L/Min Pump Displacement.
174L/Min Free Air Delivery.
Note there is slight damage to the case on top of the electric motor and the tires are flat (see photos).
Sold Price
$336
Skylarc Ref J126126
Large Assortment of Weldwell Arc Welding Electrodes.
17 Partial cartons of general purpose arc welding electrodes.
2 partial cartons of Weldwell stainless steel electrodes.
Please see photos to get an idea on qty and condition.
Note the contents have not all been confirmed, there could be mixed types/partial units in the cartons.
Sold Price
$335
Skylarc Ref S126811
Assorted Lot of Brass, Copper & Steel Material Rods & Sheets.
Includes:
- 16x Hollow brass box rods, each is 9.5x9.5mm square with lengths varying from approx 2180mm to 2340mm.
- 2x L-Shaped brass rods, each side 9.4x9.4mm and lengths of both pieces 900mm.
- 1x solid brass rod 6.4x6.4mm square and 785mm long.
- 1x Copper sheet 3mm thick and 1200x310mm in size.
- 1x brass sheet 0.8mm thick and approx 543x500mm in size (with two small sections cut out, see photos).
- 3x Steel lengths each 4030mm in length and 13mm wide, 3.2mm thick
Can filled with assorted short cutoff lengths of brass and steel lengths, Copper sheets.
See photos for further details on items included.
Items are leftover home workdhop supply stock.
Sold Price
$327
Skylarc Ref L125972
Engineers Milling Machine Vice.
Jaw Width: 150mm.
Jaw Depth: 45mm.
Jaw Opens To: 210mm.
Mounting point distance: 180-230mm.
Mounting point size: 25x18mm.
Sold Price
$326
Skylarc Ref M126129
Large Assortment of Ratchet Tie Downs.
Various sizes and lengths.
25 Ratchets.
23 Tie down reels.
Sold Price
$325
Skylarc Ref B126118
Pair of Petzl Newton EasyJet Fall Arrest Harnesses.
Both size 2.
Note these will need to be certified before use.
Sold Price
$322
Skylarc Ref S125563
Sandvik Coromant T-Max Indexable Milling Cutter.
Type No. R265.2-250M.
Includes 5x cases of Assorted compatible Indexes.
Includes case.
Cutter shows some wear and usage, see photos.
Sold Price
$320
Skylarc Ref K125269
23x Assorted Lengths of Horizontal Pallet Racking Rails.
Includes the following sizes:
- 10x 2135x90x50mm.
'- 9x 2135x80x45mm.
- 2x 2745x90x50mm.
- 2x 2745x80x45mm.
- 1x unit that has been cut into two parts each 720mm and 1415mm, see photos.
Sold Price
$320
Skylarc Ref B125858
Makita Abrasive Cut-off Saw.
Model No. LW1400.
Uses 355mm diameter disks.
2400W.
Sold Price
$320
Skylarc Ref I125969
Vintage Heavy Duty Soviet Milling Machine Vice.
Make: Baranovichi Factory Machine Accessories.
Factory: 752.
Manufacture Date: 1973.
Made in: USSR.
Jaw Width: 250mm.
Jaw Depth: 80mm.
Jaw Opens to: 345mm
Mounting point distance: 370-450mm.
Mount slot size: 40x20mm.
Missing handle
Sold Price
$312
Skylarc Ref F125680
Pair of Vintage Industrial Calipers.
1 unit Opens to 1725mm.
1 unit Opens to 650mm.
Sold Price
$310
Skylarc Ref L126700
Lathe Pipe Threading Taping Chuck w/ Assorted Inserts.
Unknown manufacturer or model.
Chuck face approx 90mm diameter. Inner diameter approx 35mm.
Mounting shank 65mm long, 40mm diameter.
Includes assorted sets and loose pieces of cutting teeth, see photos.
Sold Price
$310
Skylarc Ref B125780
Iscar Indexible Lathe Turning Tool.
Part No. PDJNR 2525M-11
Includes case of 9x spare Inserts.
Sold Price
$307
Skylarc Ref G126201
4.2T Multi Leg Lifting Chain.
1.8m chain length.
10mm chain diameter.
Single leg load 3.15T.
Multi leg load 4.2T.
Sold Price
$307
Skylarc Ref Z125544
NEW Bosch 180mm Angle Grinder GWS 24-180 LVI.
Note this unit is new out of the box but has been Branded with SCE branding.
No Load Speed: 8.500rpm.
Rated Input Power2,400 W.
Grinding Spindle Thread: M14.
Main Handle: Bow (rotating).
Disc Diameter: 180 mm.
Switch Type: PROtection.
Accessories included: Back Flange, Vibration Control Auxiliary Handle, Locking Nut, Quick Adjustment Protective Guard, and Two-hole Spanner.
Sold Price
$300
Skylarc Ref S125225
Industrial Bench Grinder w/ Stand.
Manufactured by MEC Engineering.
Worn ID label so unable to read specs.
Unknown model number.
Single phase.
Can accomadate grinding wheels up to approx 200mm diameter.
Mounted on a heavy steel 920mm tall stand.
Condition - Appears to be an older model showing Workshop wear and surface grime. Some safety guards are missing, see photos.
Sold Price
$300
Skylarc Ref B125676
Mitutoyo 4"-8" micrometer set
No.104-150A
Interchangeable tips
Test blocks
Spanner
Wooden case
Sold Price
$300
Skylarc Ref B126716
Manual Lever Operated Shapping Machine.
Table dimensions: 275x220mm.
Mounted to solid steel pedestal - can be removed.
Comes with assorted tooling.
Sold Price
$300
Skylarc Ref F126200
7.5T Multi Leg Lifting Chain.
2m long chain.
13mm chain diameter.
Master link approx 235x170mm.
Sold Price
$295
Skylarc Ref O125273
Industrial Pallet Jack.
Unable to read ID label so manufacturer and max lifting Capacity is unknown.
Fork length 1140mm, fork width 160mm.
Gap between forks 235mm.
Forks raise from approx 50mm up to approx 160mm.
Jack appears to operate normally. Shows typical industrial wear and usage.
Sold Price
$290
Skylarc Ref E125237
Heavy Duty Workshop Divider Wall.
Appears to be custom built.
Heavy steel base support and frame with painted MDF or plywood boards.
Heavy but can be moved with two people. Eye loop on top for moving via lifting strap.
Condition - Shows typical workshop wear and usage. Some bowing to frame.
See our other listings for more of these units.
Sold Price
$289
Skylarc Ref E125809
Pair of Matched Engineering V-Blocks.
Each unit is approx 359ix112x245mm.
Items show typical industrial wear and usage.
Sold Price
$285
Skylarc Ref S125251
Steel Topped Wooden Workbench.
Wood board bench frame and lower shelf.
Work surfaces and upper side walls are of 4mm welded steel plate.
Work surface approx 935mm above floor.
Sturdy unit.
Sold Price
$281
Skylarc Ref G125603
AW brand
BT40 mill chuck
6 x collets
C25-6, C25-8, C25-10, C25-12, C25-16, C25-20
In case
Sold Price
$280
Skylarc Ref Y126713
Engineering Vice (100x65mm).
Jaw Opens to: 65mm.
Jaw Length: 100mm.
Jaw Depth: 35mm.
Mounting point distance: 145mm to 185mm
Mounting point size: 20x15mm.
Sold Price
$277
Skylarc Ref L125868
Rex Tristand CVX6 Chain Vice.
Capacity 1/8" to 6".
Height above floor approx 830mm.
Legs fold for storage.
Condition - Shows typical industrial wear and usage. Some surface rusting. Dusty.
Sold Price
$272
Skylarc Ref A125675
Model: Mercer 750/62
Analog bore gauge
Range of tips
Wooden case
Sold Price
$270
Skylarc Ref Y126245
10x Assorted Size Morse Taper Drill Shank Adapters.
Includes the following Morse sizes:
- 2x No. 5
- 5x No. 4
- 2x No. 3
- 1x No. 2
Sold Price
$266
Skylarc Ref L125764
Adjustable Angle Mill Vice.
Unknown manufacturer.
Jaw width 175mm.
Jaw opens approx 100mm.
Adjustable tilt angle.
Rotating base.
Mounting slots in base spaced approx 300mm apart.
Crank handle is included, see last photo.
Condition - threaded shaft to open/close Jaws tends to come detached, may need some servicing to reattach. Vice shows typical industrial usage and wear.
Sold Price
$265
Skylarc Ref K125607
AW ACK 40-55T adjustable boring head
ACK4-40 tool extension
BT40 ACK4-80 tool holder
Sold Price
$262
Skylarc Ref F125238
Heavy Duty Workshop Divider Wall.
Appears to be custom built.
Heavy steel base support and frame with painted MDF or plywood boards.
Heavy but can be moved with two people. Eye loop on top for moving via lifting strap.
Condition - Shows typical workshop wear and usage.
See our other listings for more of these units.
Sold Price
$261
Skylarc Ref U126293
Vintage Mini Metal Hobby Lathe.
Unknown manufacturer and age.
Bed length is approx 215mm.
Swing approx 100mm.
Three jaw chuck approx 77mm outside diameter, inside diameter approx 15mm.
Jaws open up to approx 40mm.
Overall dimensions approx 420x160x160mm.
Condition - Jaws open and close good, Chuck shaft spins smoothly but is a bit stiff. Cutting Tool Assembly moves well over the bed. Drive motor and second belt Pully Assembly is missing. Chuck key missing.
See photos for further details on Lathe and its condition.
Sold Price
$259.50
Skylarc Ref S125953
Vintage EMF Welder.
Plate information:
"E.M.F Electric Co. (NZ) LTD
No 776 Z3
Type: TAD300
400/415 Volts 50Hz 1 Phase 37 Amps
72 Volts
Current Range 75 - 300
C97- 1942 - P.F.8
Max Cont. Rating 200"
3 phase 32A, 500V plug.
Sold Price
$257
Skylarc Ref T125564
Sandvik Coromant T-Max Indexable Milling Cutter.
Part No. R245-20Q60-12M.
Includes tool Holder part No. A267-801 1UNC.
Includea mounting bolts and hard case.
Condition - Shows some usage and wear, see photos. Some Indexes are missing.
Sold Price
$255
Skylarc Ref U126215
Pack of Weldwell 4.0mm Low Hydrogen Welding Electrodes.
15kg net weight.
Made in NZ.
New unopened sealed box.
Sold Price
$254
Skylarc Ref T126214
Pack of Weldwell 2.5mm Low Hydrogen Welding Electrodes.
Four 2.2kg packs are new and manufacturer sealed a fifth pack has been opened, see photos.
Sold Price
$253
Skylarc Ref Z125856
Makita Cut-off Saw.
Model No. 2414NB.
Uses 355mm diameter blades.
Tool shows moderate industrial usage and wear.
Sold Price
$250
Skylarc Ref Q126107
Assortment of BOC Welding Torch Equipment.
Various torches, attachments and guages.
Sold Price
$250
Skylarc Ref F124900
Sandvik Coromant BT40 ER32 Collet Chuck.
Sandvik Coromant 6408278, 1.9685 in Shank Connection.
C5-391.14-32 057 Coromant Capto® to ER collet chuck
Attached ½" 13-12 Collet.
Sold Price
$248.99
Skylarc Ref I126203
Pair of Heavy Steel Saw Horses.
Custom built units.
Top beam is 100x100mm hollow steel.
Each is approx 850mm tall.
Length each approx 1500mm.
Heavy steel support frames.
Approx 700mm wide at feet.
Condition - Items show heavy industrial wear and rusting but are still very solid units.
Sold Price
$248.55
Skylarc Ref T125590
Sandvik Coromant Capto Fine Boring Head Adapter type No. C5-R825C-AAF047A.
Includes original plastic case.
Sold Price
$248
Skylarc Ref M126207
Pair of Heavy Steel Saw Horses.
Custom built units.
Top beam is 125x125mm hollow steel.
Each is approx 850mm tall.
Length each approx 2200mm.
Heavy steel support frames.
Approx 550mm wide at feet.
Condition - Items show moderate industrial wear and some rusting but are still very solid units.
Sold Price
$245.01
Skylarc Ref C125677
Moore and Wright 6"-12" micrometer
No.1044
Interchangeable rods
Test blocks
Wooden case
Sold Price
$240
Skylarc Ref M125947
Partial Set of Micrometers and Testing Gauges.
5 x Outside Micrometers (Assorted Makes):
0.001" 5-6".
0.001" 4-5".
0.001" 3-4".
0.001" 1-2".
0.01mm 25-50mm.
3 x Testing Guages (Assorted Makes):
5" - 0.0000".
3" - 0.0000".
2".
Sold Price
$240
Skylarc Ref R125094
Heavy Duty Steel Topped Workbench.
Work surface approx 940mm above floor and is comprised of a 2mm thick sheet steel surface.
Rear back wall rising approx 430mm above work surface and holding a 220mm wide shelf.
Includes Record No. 4 vice.
Lower sliding doors with inner storage.
Condition - Well used but sturdy unit.
Sold Price
$239
Skylarc Ref Q125587
Pair of Large Heavy Steel Workshop Saw Horses.
100x100mm heavy steel beam support and horizontal member.
Each unit is approx 2100mm long, 870mm wide at base feet, and 1080mm tall.
Very heavy sturdy units for heavy duty work.
Some surface rusting from exterior storage.
Sold Price
$231
Skylarc Ref P125092
Steel Workshop Pigeon Hole Parts Storage Shelf Unit.
24x pigeon hole type shelves each approx 230x150mm.
Three upper full length shelves.
Condition - Unit is very dusty from workshop usage, would benefit from a clean. Some finish scratches and wear.
Sold Price
$230