NT50 Type Mill Tool Holder
SKYLARC'S ENGINEERING PLANT AND MACHINERY AUCTIONSkylarc Ref U125747
NT50 Type Mill Tool Holder.
Unable to locate a visible ID marking indicating brand and model.
Some surface rust spotting from storage
Sold Price
$150
Showing 301–360 of 830 products
Skylarc Ref U125747
NT50 Type Mill Tool Holder.
Unable to locate a visible ID marking indicating brand and model.
Some surface rust spotting from storage
Sold Price
$150
Skylarc Ref Y125699
NT50 APU13-120 Chuck Tool Holder.
With attached drill bit: approx L60mm, D10mm.
Sold Price
$150
Skylarc Ref S126109
Large Assortment of Dispenser Guns.
15 assorted Dispenser guns.
Sold Price
$150
Skylarc Ref F126226
3x Assorted Single & Double Pulley Snatch Blocks.
Includes:
- 3" single Pulley block, 0.5 ton capacity.
- Titan branded single snatch block, 75mm, 500kg capacity.
- unlabeled double Pulley block, approx 100mm diameter pulleys.
Sold Price
$150
Skylarc Ref P125950
½" Professional Torque Wrench.
Calibrated 17/12/20 till 18/12/21.
Includes plastic holding case.
565mm length.
Sold Price
$149
Skylarc Ref H125656
8 reamer pilots
One missing from set
Wooden case
Sold Price
$148.16
Skylarc Ref N126130
Pair of Record 136 Sash Cramps.
1200mm max cramp.
Sold Price
$148
Skylarc Ref K125919
BT40 ODP 12x106 G2.5 Flexfit Tool Holder.
Please see photos for full designation.
Sold Price
$146
Skylarc Ref C125287
3-Phase Industrial Metal Cut-off Saw.
Blueflash branded, model number unknown.
Can fit blades up to 300mm diameter.
3-phase, 32A, 500V plug attached.
Mounted on a mobile trolley frame.
Condition - Unit shows moderate industrial wear and usage. Two wheels on trolley do not roll properly and need replacing.
Sold Price
$146
Skylarc Ref I126255
Assorted Lathe Tooling, Boring Bars, Mounts, Accessories.
Boring Bars and associated mkubts/clamps are 25mm diameter size.
See photos for further details on the variety of included items.
Sold Price
$143
Skylarc Ref D124898
T190 - BT40-APU13-110 Drill Chuck BT APU Type.
Attached unknown size drill bit included (approx 10mm).
Sold Price
$142
Skylarc Ref I125917
BT40-ER32-150 Balanced Collet Chuck
22,000 RPM.
150mm Long.
7/16" 12-11 ER32 Collet Attached.
Sold Price
$142
Skylarc Ref L126310
15-Piece Wood Router Corner Edging Cutting Bit Set w/ Case.
Unknown manufacturer.
Shank diameter of bits 6mm.
Includes wood case.
Condition - Some bits are unused with wax coating still on them, others show some usage. See photos for further Condition details.
Sold Price
$142
Skylarc Ref Z125232
Heavy Duty Workshop Divider Wall.
Appears to be custom built.
Heavy sterl base support and frame with painted MDF or plywood boards.
Heavy but can be moved with two people. Eye loop on top for moving via lifting strap.
Condition - Shows typical workshop wear and usage.
Sold Price
$141
Skylarc Ref B125234
Heavy Duty Workshop Divider Wall.
Appears to be custom built.
Heavy sterl base support and frame with painted MDF or plywood boards.
Heavy but can be moved with two people. Eye loop on top for moving via lifting strap.
Condition - Shows typical workshop wear and usage.
See our other listings for more of these units.
Sold Price
$141
Skylarc Ref X125698
NT50 ER32 Collet Chuck Tool Holder.
ER32, 7/16", 12-11 Collet with attached tap drill: Approx L60mm, D16mm.
Sold Price
$141
Skylarc Ref H126202
Pair of Heavy Steel Saw Horses.
Custom built units.
Top beam is 105x105mm hollow steel.
Each is approx 840mm tall.
Length approx 1300mm.
Heavy steel support frames.
Condition - Items show heavy industrial wear and rusting but are still very solid units.
Sold Price
$141
Skylarc Ref A126247
3x Mill Steel Parallel Units.
Each is approx 300x95x48mm.
Sold Price
$141
Skylarc Ref D126718
Industrial Flatbed Trolley.
Sitting on 4 outer 80mm castor wheels and two center 160mm castor wheels.
Sold Price
$141
Skylarc Ref G125837
Pair of Heavy Steel Saw Horses.
Top beam is 1515mm long and 100x100mm square.
Each unit is approx 855mm tall.
Width at support feet approx 700mm
Heavy sturdy custom built units.
One unit has a 250mm long extension welded to side, see photo.
Some surface rusting.
Sold Price
$138
Skylarc Ref V125982
NT50 - ER50-50 Collet Chuck Tool Holder.
Attached ER50 Collet 1¼" or 32mm.
Sold Price
$138
Skylarc Ref K125893
Elephant 1T Chain Hoist.
Made in Japan in 2017.
Model C-21
3m chain length
6.3mm chain diameter.
Sold Price
$137
Skylarc Ref Y125595
NT40 / BT40 Mill Tool Holder Vice w/ 3x Collet Wrenches.
Vice has vertical and horizontal Holder mounts.
Vice measures approx 205x100x150mm.
Includes a AW branded ER32 collar wrench and 2x unbranded 13mm chuck wrenches, see photos for wrench type details.
Sold Price
$136
Skylarc Ref H125734
Mill Tool Length Setter / Indicator ZIP-50A.
AW branded.
Item measures approx 65mm diameter and 53mm tall.
Includes wood case.
Sold Price
$135
Skylarc Ref J125684
Large Assortment of Safety Signage.
Please see photos for Signage type/size/qty.
Sold Price
$135
Skylarc Ref Z125778
Iscar Indexible Lathe Turning Tool.
Part No. PCLNR 2525M-12x.
Includes case of 3x spare Inserts.
Sold Price
$134.95
Skylarc Ref A125909
BT40 FMB32-60 Arbor Chuck Holder with Face Milling Cutter.
BT40 FMB32-60 Chuck Holder.
R245-100Q32-12L CoroMill® 245 face milling cutter attached.
Sold Price
$134
Skylarc Ref R125224
Small Heavy Duty Steel Workshop Table.
5mm thick steel plate top.
Heavy steel frame.
Some surface rust.
Sold Price
$133
Skylarc Ref B126248
Pair of Mill Steel Parallel Units.
Each is approx 100x80x48mm.
Sold Price
$132.50
Skylarc Ref A122737
Large Industrial Roller.
Heavy steel construction.
Unknown manufacturer.
Label on one end states the following:
0001-30-21-001
219.5x1480/1726
98204
Unit is approx 1480mm long, 219.5mm diameter.
Centre hole approx 75mm diameter.
Includes 1x centre solid steel shaft 75mm.diameter, approx 1720mm long.
Unit appears unused.
Sold Price
$132
Skylarc Ref K125087
Canon ImageClass MF525x Multi Function Mono Laser Printer.
Manufactured in 2018.
Prints up to A4 size.
Black and white printing only.
Total page count 27447 pages.
90% black toner remaining.
Sold Price
$131.10
Skylarc Ref S125927
24WCMX 3xD 040208 Insert Drill.
24mm Diameter.
WCMX050308 Insert.
TS3008 Screw.
FT10 Key.
Sold Price
$131
Skylarc Ref W125593
3x Sets of Letter & Number Punch Sets.
Includes:
- Groz branded Letter Punch Set LP-6, 6mm size.
- Groz branded Number Punch Set NP-6, 6mm size.
- 2x Sets of older unbranded letter and number punches, also 6mm size.
Condition - Groz branded sets appear near new with most units showing no previous usage or very minor use. Older unbranded sets show typical industrial usage, some surface rust spotting, dust etc.
Sold Price
$131
Skylarc Ref S125979
NT50 (DIN2080 50 EM32X80) Side Lock Tool Holder.
With Attached Insert Drill: Approx 90mm length, 30mm diameter.
Sold Price
$131
Skylarc Ref W125697
NT50 SLA32-90 M24 Side Lock Tool Holder.
With attached insert drill L125mm, D33mm.
Sold Price
$131
Skylarc Ref H125890
Titan 0.5T Chain Hoist.
3m long chain.
6mm chain diameter.
Sold Price
$131
Skylarc Ref N126208
Pair of Heavy Steel Saw Horses.
Custom built units.
Top beam is 100x100mm hollow steel.
Each is approx 850mm tall.
Length each approx 1510mm.
Heavy steel support frames.
Approx 700mm wide at feet.
Condition - Items show heavy industrial wear and rusting but are still very solid units.
Sold Price
$131
Skylarc Ref X126270
Filippi Filigare 1200mm Flourecent Ceiling Light.
Made in Italy.
Art No. FIL 294 2x36 2S
Code No. 2FI140236R.
Light fixture body approx 1280x297x85mm.
Starter switch 230V, 50Hz, IP20.
Low loss ballast EEI = B2 + Fuse.
Condition - New unit, opened for photos only.
See photos for further light design details.
Sold Price
$131
Skylarc Ref R125900
BT40 FMB22-125 Face Mill Holder.
Sold Price
$130
Skylarc Ref A125701
Bosch 125mm Angle Grinder.
Model No. Professional GWS 15-125 CIEP.
Missing disk changing tool.
Tool shows moderate industrial Workshop wear and usage.
Sold Price
$130
Skylarc Ref Z126714
Industrial Mill Lock Down Kit.
Unknown Manufacturer.
Kit is incomplete and missing some components, see photos for details on what is missing.
Sold Price
$130
Skylarc Ref M125921
26mm U Insert Drill.
Model: 26WCMX WCMT050308
T10 Wrench, M3.0x0.5 Screw.
Drilling depth: 78mm.
Shank: 32mm.
Cutting Diameter: 26mm.
Insert: WCMT050308.
Sold Price
$128
Skylarc Ref W126243
2x Lathe Tool Posts.
Each is approx 125mm long, 47mm wide, 70mm high (excluding top bolts).
Inner groove approx 37mm wide, 23mm deep.
One unit is missing all its Tool holding bolts.
See photos for further details on design of units.
Sold Price
$128
Skylarc Ref O126209
Pair of Heavy Steel Saw Horses.
Custom built units.
Top beam is 100x100mm hollow steel.
Each is approx 850mm tall.
Lengths are approx 1600mm and 1470mm.
Heavy steel support frames.
Approx 720mm wide at feet.
Condition - Items show heavy industrial wear and rusting but are still very solid units.
Sold Price
$127
Skylarc Ref H125084
Heavy Duty Workshop Specialised Rack Trolley Cart.
Heavy steel frame with 125mm diameter Castors.
20mm thick wood ply board surface with vertical slats for holding materials. Tapered slat spacing is approx 55mm at base and approx 100mm at top. One larger 320mm wide slat at front. See photos for further design details.
Sold Price
$126
Skylarc Ref R125562
Heavy Duty 2-Wheel Barrel Trolley.
Thick wood boards, front and rear boards curved cut to support wine barrel or other similar sized item. 540mm diameter tyres.
Heavy steel frame.
Trolley length including pull/push handle approx 1530mm.
Condition - Wood boards show wear and weathering from age. Trolley rolls smoothly. Older but solid unit.
Sold Price
$126
Skylarc Ref T126006
Assortment of Cut-Off/Grinder Wheels.
13 x Taipan 230×1.9×22.23mm cut-disc disc.
16 x Norton 180×6.0×22.2mm metal grinding disc.
4 x Elite 230×7.0×22.23mm grinding disc.
8 x Taipan 180×1.6×22.23mm cutting disc.
1 x Taipan 230×7.0×22.23mm grinding disc.
Sold Price
$126
Skylarc Ref P125560
Workshop Vice on Heavy Steel Stand.
Vice Made in Australia by Carter.
Model No. 4
105mm wide jaws.
Mounted on a 890mm tall heavy Steel stand.
Shows typical workshop wear and usage. Jaws show some damage, see photos.
Sold Price
$125
Skylarc Ref G125811
Pair of Engineering Mill Parallels.
Each is approx 300x26x65mm.
Mounting bolt holes approx 100mm apart on centre.
Sold Price
$125
Skylarc Ref B125884
Pair of 300mm G-Clamps.
Unknown manufacturer
Both units show typical industrial wear and usage.
Sold Price
$125
Skylarc Ref P126210
Pair of Heavy Steel Saw Horses.
Custom built units.
Top beam is 100x100mm hollow steel.
Each is approx 850mm tall.
Length is approx 1490mm each.
Heavy steel support frames.
Approx 700mm wide at feet.
Condition - Items show heavy industrial wear and rusting but are still very solid units.
Sold Price
$125
Skylarc Ref Q126809
8x Assorted Vintage Drill Chucks & Keys.
Includes the following Keyed chucks:
- Jacobs UK 13mm No. 33B.
- Jacobs UK 8mm No. 30.
- Jacobs UK 8mm No. 30B.
- Jacobs 8mm (no model number)
- Jacobs USA Multi Craft DC4G61, 10mm.
- 10mm Chuck marked with HTKK.
Includes 7x Assorted Chuck Keys.
Includes 2x Keyless Chucks, unknown manufacturers, see photos.
Condition varies with each unit.
Sold Price
$125
Skylarc Ref F125082
Small Workshop Workbench Tool Bench.
Sturdy steel frane with Laminated MDF board shelf surfaces and side walls.
Main surface approx 870mm above floor.
Lower shelf.
Upper raised shelf with holes for holding tools rises approx 265mm.above main surface.
Condition - Small but sturdy unit. Would benefit from a clean.
Sold Price
$123
Skylarc Ref W126269
Filippi Filigare 1200mm Flourecent Ceiling Light.
Made in Italy.
Art No. FIL 294 2x36 2S
Code No. 2FI140236R.
Light fixture body approx 1280x297x85mm.
Starter switch 230V, 50Hz, IP20.
Low loss ballast EEI = B2 + Fuse.
Condition - New unit, opened for photos only.
See photos for further light design details.
Sold Price
$123
Skylarc Ref U126111
3 First Aid Kits.
Each kit has various dressings, plasters, wipes etc.
Please see photos for an idea on individual contents and quantities.
Sold Price
$122.20
Skylarc Ref F125550
4 x ~320L Industrial Drums.
Approximately 320L Capacity Each.
Sold Price
$122
Skylarc Ref T125928
27 WCMX 2xD 050308 Insert Drill.
27mm Diameter.
WCMX050308 Insert.
TS3008 Screw.
FT10 Key.
Sold Price
$122
Skylarc Ref S125771
14x Assorted Staggered Tooth Milling Cutters.
Assorted brands and sizes.
Diameters range from approx 100mm to approx 150mm.
Condition varies with each unit. Most show moderate surface grime from workshop storage. Many have surface rust spotting.
Sold Price
$122
Skylarc Ref R126108
3 x Alemite Lever Action Grease Guns.
Sold Price
$122
Skylarc Ref A124895
BT40 ER32-150 Collet Chuck.
E32 5/8", Ø 16-15 Collet.
150mm Gauge Length.
Sold Price
$121