← Back to Auctions

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Auction Ended: Sunday, 3 August 2025

Showing 1–60 of 288 products

Pacific Three Phase Milling Machine Sold Trade Me

Sold on: 3 Aug 2025

Pacific Three Phase Milling Machine

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref X167392

Universal milling machine with vertical and horizontal NT40 spindles
Table size 1250mm x 280mm
Longitudinal travel 850mm, cross travel 290mm, vertical travel 475mm
Spindle speeds: 35–1800 RPM, variable in 2 ranges (35–250 / 250–1800)
5.5kW motor, 220/380/415V, 50Hz
Power feeds on X and Z axes
Universal milling head with integrated safety guard
Digital speed displays for vertical and horizontal spindle
Includes 2 horizontal arbor supports (no arbor included)
Approximate weight 1.8 tons

To see this machine running:
https://youtu.be/pxt-hRTKYRE

Sold Price

$9,650

View Listing
TOS Three Phase Lathe Sold Trade Me

Sold on: 3 Aug 2025

TOS Three Phase Lathe

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref L167328

TOS Trencin SN40C centre lathe
Distance between centres 1000mm
Swing over bed 400mm, swing over gap 600mm
48mm spindle bore
20 spindle speeds, 22.4–2000 rpm
Metric and imperial thread cutting capability
200mm three jaw chuck
Traveling steady
Manufactured in Czechoslovakia, net weight 1620kg

Sold Price

$7,050

View Listing
Laguna Three Phase Milling Machine Sold Trade Me

Sold on: 3 Aug 2025

Laguna Three Phase Milling Machine

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref K167327

Lagun FTV-1S turret milling machine
Table size 1120mm x 250mm
NT40 spindle taper
Power feed on X and Y axes
Millvision digital readout (DRO) system installed
115 - 3250 rpm spindle speed
Two speed ranges
Fitted machine vice included 150mm
Vertical spindle with manual fine feed
Spindle speed control on head
Emergency stop and multiple start/stop buttons on control panel
Coolant trough/base tray
Guarding fitted for operator safety
3-phase 2.2kW motor
20 amp plug
Condition consistent with workshop use

To see this machine running:
https://youtu.be/TiNLTeKkBeM

Sold Price

$7,000

View Listing
TOS Three Phase Lathe Sold Trade Me

Sold on: 3 Aug 2025

TOS Three Phase Lathe

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref R167386

TOS Trencin SN40C centre lathe
Distance between centres 1000mm
Swing over bed 400mm, swing over gap 600mm
48mm spindle bore
20 spindle speeds, 22.4–2000 rpm
Metric and imperial thread cutting capability
200mm three jaw chuck
Two 250mm four jaw chucks
350mm four jaw chuck
250mm Burnerd 6 jaw chuck
405mm faceplate
Robust manual toolpost and tailstock
Original operation, maintenance, and instruction manual included
Manufactured in Czechoslovakia, net weight 1620kg
All chucks and faceplate shown included

To see this machine running:
https://youtu.be/87AxowlFRgs

Sold Price

$6,650

View Listing
DYE Metal Cutting Guillotine Sold Trade Me

Sold on: 3 Aug 2025

DYE Metal Cutting Guillotine

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref J167352

Dye Industries NZ hydraulic guillotine.
Model: 2.5 x 5 MS
Cutting width: 2300mm
Maximum thickness capacity: Mild steel 3.0mm, stainless steel 2.0mm, aluminium 5.0mm
Electric back gauge
Robust steel construction, made in New Zealand
Electric motor drive system
Serial No: 1580/90
Blades look in good condition
Suitable for sheet metal and fabrication applications

Sold Price

$6,650

View Listing
Joemars EDM Machine Sold Trade Me

Sold on: 3 Aug 2025

Joemars EDM Machine

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref Y167367

Joemars AF50 EDM machine
Manufactured by Joemars Machinery & Electric Industrial Co., Ltd
Model JM322, Serial No. 9060724, Year: 1994
T slot table size: 600mm x 300mm
Tank size: 870mm x 480mm x 330mm
Three phase power supply
Control panel with Heidenhain display and manual/auto settings
Includes operational manual and spare filter elements
Machine vice included on table
Condition as shown in photos

To see this machine running:
https://youtu.be/VvLeiUiPcn0

Sold Price

$5,100

View Listing
Cammac Three Phase Band Saw Sold Trade Me

Sold on: 3 Aug 2025

Cammac Three Phase Band Saw

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref D167346

500mm x 600mm tilting cast iron table
250mm max cutting depth
450mm throat capacity
Adjustable blade speed with selector chart for various metals
Integrated blade welder, grinder, and cutter
3-phase, 415V, 50Hz power (16A plug fitted)
Includes spare blades (visible in packaging)
Suitable for metal cutting applications
Robust construction, made in Taiwan
Date of manufacture: 2003
Safety lamp and guards fitted
CAMMAC branded
Serial No: B45703

Sold Price

$3,510

View Listing
Fanuc Tape Drill CNC Milling Machine Sold Trade Me

Sold on: 3 Aug 2025

Fanuc Tape Drill CNC Milling Machine

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref U168299

Fanuc Tape Drill Mate-Model T vertical CNC drilling/tapping machine
Year: 1991
Fanuc Series 0-M CNC control
Table size: 380mm x 650mm T-slot table
Bed riser plate: 400mm x 600mm
X axis travel: 240mm, Y axis travel: 320mm, Z axis travel: 300mm (from display and standard spec)
Spindle speed: up to 6000 rpm (standard spec for this model)
10-position automatic tool changer
Serial input uploads from machine, but not to machine
Extremely low hours – 169 spindle hours from new, ex-educational institution
200V 3-phase, 12 KVA power supply
Tooling and holders as pictured
Supplied with operator, parts, and maintenance manuals

Sold Price

$3,380

View Listing
Hafco Woodmaster Three Phase Thicknesser Sold Trade Me

Sold on: 3 Aug 2025

Hafco Woodmaster Three Phase Thicknesser

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref U167337

Hafco Woodmaster T-20S Thicknesser
Spiral cutter head for smoother finishes and quieter operation
Maximum timber capacity: 508mm wide x 200mm high
Powerful 3.75kW motor
Manufactured in Taiwan, serial no. 141497, year 2014
Heavy-duty cast iron construction for stability
Fitted with emergency stop and D.O.L. starter
Fitted with digital thickness gauge for precise adjustment
20 amp three phase plug
Large handwheel for table height adjustment
Rear dust extraction port for efficient chip removal

Sold Price

$3,030

View Listing
Zopf Profile Rollers (No formers) Sold Trade Me

Sold on: 3 Aug 2025

Zopf Profile Rollers (No formers)

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref N167330

Zopf Biegemaschinen GmbH Ringbiegemaschine (Profile Ring Roller)
Model ZB 60, built 1997
Three driven shafts with manual top shaft adjustment
Includes integrated control switches for on/off and direction
Powerful geared electric motor with industrial plug
Serial number: 97526 SE
Clear graduated scale for precise adjustment
No former rollers included
Made in Germany, robust construction
Previously used in a technical training environment
Suitable for bending pipe, tube, and profile sections (formers required, not included)

Sold Price

$3,000

View Listing
Peddinghaus Punch and Shear Sold Trade Me

Sold on: 3 Aug 2025

Peddinghaus Punch and Shear

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref A167395

Peddinghaus Peddiworker 400 ironworker.
Three phase power supply.
Footswitch control.
Equipped with shearing, punching, and notching stations.
Shearing capacity: 1/2 inch plate, 4 x 9/16 inch, and 6 x 3/8 inch.
Angle iron cutting at 90 degrees: 3 x 5/16 inch, 2 x 1/4 inch.
Angle iron cutting at 45 degrees: 3 x 5/16 inch, 2 x 1/4 inch.
Channel capacity Z1: 3 x 1/4 inch; L: 2 x 1/4 inch.
U bar capacity U 3-5.7 lbs; I 3-5.7 lbs.
Punching specifications: 1 1/4 inch, 13/16 inch.
Flat bar notching capacity: 1 5/8 x 5/16 inch, 1 1/8 inch.
Round bar shearing diameter: 23mm.

Sold Price

$2,871

View Listing
Superjet Eutalloy S Oxy-Acetylene Thermal Spray Torch Kit Sold Trade Me

Sold on: 3 Aug 2025

Superjet Eutalloy S Oxy-Acetylene Thermal Spray Torch Kit

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref B168046

Superjet Eutalloy S Oxy-Acetylene Thermal Spray Torch Kit by Castolin Eutectic.
Complete professional thermal spray kit for metal surface restoration and protection.
Includes SuperJet Eutalloy torch body, 3 spray nozzles, shield, and control knobs.
Range of alloy powders: Tungtec 10112, BronzoChrom 10185, NiTec 10224, Chromtec 10680 (each 500g).
Flux container (solution R104, 0.4kg) included.
Supplied with accessories: adjustable spanner, maintenance tool, and starter consumable pack.
Operating pressure chart present on torch for precise setup.
SuperJet Eutalloy carry case.
Ideal for: rebuilding worn parts, hardfacing, corrosion and wear protection, and joining nickel-base alloys.
Items appears as new unuse.

Sold Price

$2,610

View Listing
Arboga Maskiner Gear Head Drill Press Sold Trade Me

Sold on: 3 Aug 2025

Arboga Maskiner Gear Head Drill Press

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref W167339

Model: A.B.Arboga Maskiner E830
600mm x 500mm T slot table
Adjustable height table
MT4 spindle taper
1.9hp three phase motor
Spindle speeds 80, 122, 160, 245, 290, 445, 580, 890 rpm
160mm spindle travel
2 speed ranges
Auto feed
Guards
16 amp three phase plug
Small mill vice
Top quality swedish machine

Sold Price

$2,400

View Listing
HWM Manual Sheet Metal Guillotine Sold Trade Me

Sold on: 3 Aug 2025

HWM Manual Sheet Metal Guillotine

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref E167347

H.W.M. Engineering Ltd manual guillotine
1240mm maximum cutting width
Foot operated
Heavy-duty steel construction
Spring return system visible under the working area
Blades appear in good condition

Sold Price

$2,300

View Listing
Bipel 80 Ton NC Hydraulic Press Sold Trade Me

Sold on: 3 Aug 2025

Bipel 80 Ton NC Hydraulic Press

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref P168268

Bipel hydraulic press with vertical orientation.
Control panel with touchscreen interface and push button controls.
Emergency stop control present on separate Siemens station.
Temperature controller for upper and lower die with Omron ESC5Z digital displays.
Powered hydraulic system with external oil reservoir and pump unit.
Safety enclosure with transparent door.
Electrical safety key switch on control panel.
Hydraulic connections visible on press assembly.
Model and rated capacity not identified.

Sold Price

$2,257

View Listing
Strands Three Phase Gear Head Drill Sold Trade Me

Sold on: 3 Aug 2025

Strands Three Phase Gear Head Drill

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref G167349

Strands S68 floor standing drill press made in Sweden
415V, 3-phase, 0.75/0.90kW motor
Spindle speeds: 100, 205, 345, 440, 695, 1450, 2900 RPM
2 speed ranges
Table size 480mm x 350mm with T-slots
150mm spindle travel
MT3 spindle taper with 13mm keyless chuck
Integrated work light and safety guard
Equipped with machine vice
Push-button start/stop controls
Heavy-duty cast iron base for stability
Industrial build quality suitable for workshop use

Sold Price

$2,170

View Listing
Fexac Three Phase Milling Machine Sold Trade Me

Sold on: 3 Aug 2025

Fexac Three Phase Milling Machine

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref X167366

FEXAC Universal Milling Machine
Table size 1100 x 240mm, 3 T-slots (14mm wide, 60mm spacing)
NT40/ISO40 spindle taper, 12 spindle speeds, 48–1500 RPM range
X axis travel 825mm (automatic), Y axis 250mm (automatic), Z axis 425mm (automatic), 0–425mm max/min spindle distance to table
Sony 2-axis digital readout (DRO) system installed
Includes horizontal arbor and 2 horizontal arbor supports as shown
Power feed on X axis, rapid traverse currently stuck on, 12 feed rates
Perspex safety guarding
Operating buttons for rapid/normal/feed

To see this machine running:
https://youtu.be/SgG4J8bzQJk

Sold Price

$2,150

View Listing
Go-Power Systems Dynamometer Sold Trade Me

Sold on: 3 Aug 2025

Go-Power Systems Dynamometer

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref Z167394

Go-Power Systems engine test stand
Equipped with Robin single cylinder diesel engine
Go-Power Systems (Palo Alto, Calif.) branded instrumentation panel with multiple gauges
Features hour meter, RPM, oil, vacuum, and other engine instrumentation
Mounted on a robust steel trolley frame with locking castor wheels for mobility
Go-Power dynonometer M13, serial number RD2933
Steel frame includes heavy-duty engine support, exhaust, and fluid management components
Electric start and ignition controls on instrument panel
Suitable for engine testing, demonstration, or educational use

Sold Price

$2,085

View Listing
Strands Three Phase Gear Head Drill Sold Trade Me

Sold on: 3 Aug 2025

Strands Three Phase Gear Head Drill

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref F167348

Strands S68 floor standing drill press made in Sweden
415V, 3-phase, 0.75/0.90kW motor
Spindle speeds: 100, 205, 345, 440, 695, 1450, 2900 RPM
2 speed ranges
Table size 480mm x 350mm with T-slots
150mm spindle travel
MT3 spindle taper with 13mm keyless chuck
Integrated work light and safety guard
Equipped with machine vice
Push-button start/stop controls
Heavy-duty cast iron base for stability
Industrial build quality suitable for workshop use

Sold Price

$1,960

View Listing
Carba-Tech Single Phase Drum Sander Sold Trade Me

Sold on: 3 Aug 2025

Carba-Tech Single Phase Drum Sander

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref S167335

Carba-Tec MS-25B Drum Sander for wood sanding applications
240V, 50Hz, single phase power supply, 15A
2.25kW motor, 1500rpm drum speed
130mm max capacity
Model date: 08/2011
Wide conveyor belt for large workpieces
Includes a selection of sanding rolls and spare conveyor belt
Manual and parts list included
Emergency stop switch for added safety
Ideal for cabinetmakers, joiners, and woodworkers.
Made in Taiwan for Carba-Tec Pty Ltd

Sold Price

$1,929

View Listing
TOS Three Phase Milling Machine Sold Trade Me

Sold on: 3 Aug 2025

TOS Three Phase Milling Machine

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref V167390

Made in Czechoslovakia by TOS Olomouc
1370mm x 300mm T-slot table for versatile workholding
Table, knee, and head have mechanical and manual controls
Spindle speed dial with clearly marked ranges 45 rpm up to 1400 rpm
Fitted with vertical head and NT40 spindle taper (ER collet style visible)
Safety spindle guard fitted to the front
Electric control panel with start/stop and feed direction control
Worklamp attached for operator convenience
Robust cast iron construction for stability
Power feeds not working, motor runs but need doesn't move, manual feed works fine.
Rear panel removed

To see this machine running:
https://youtu.be/wMqKWJPd1Ws

Sold Price

$1,855

View Listing
Luxcut Tool Cutter Grinder Sold Trade Me

Sold on: 3 Aug 2025

Luxcut Tool Cutter Grinder

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref T167362

Luxcut TC30 Tool & Cutter Grinder
End mill capacity: 2" (50mm) shank, 9" (225mm) OD, 10" (250mm) length
Swing over table: 9-3/4" (245mm)
Longitudinal table travel (X): 6" (150mm)
Cross travel of wheel table (Y): 3" (75mm)
Max motor assembly travel across table: 6" (150mm)
Max wheel: 5" x 2" x 1-1/4" (125 x 50 x 32mm) flaring cup
Motor: 230V, 1 phase, 1/3 HP (0.25kW), 2800 RPM, 50Hz
Tilt adjustment for wheelhead: +30° to -5°
Air bearing swivel: 360°, stroke: 10" (250mm)
Table infeed graduation: 0.001" (0.02mm)
Includes attached task light
Comes with 5C collet set in box and various accessories

Sold Price

$1,760

View Listing
Strands Three Phase Gear Head Drill Sold Trade Me

Sold on: 3 Aug 2025

Strands Three Phase Gear Head Drill

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref A167343

Strands S68 floor standing drill press made in Sweden
415V, 3-phase, 0.75/0.90kW motor
Spindle speeds: 100, 205, 345, 440, 695, 1450, 2900 RPM
2 speed ranges
Table size 480mm x 350mm with T-slots
150mm spindle travel
MT3 spindle taper
Push-button start/stop controls
Heavy-duty cast iron base for stability
Industrial build quality suitable for workshop use

Sold Price

$1,724

View Listing
Erlo Gear Head Drill Press Sold Trade Me

Sold on: 3 Aug 2025

Erlo Gear Head Drill Press

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref Z167342

Model: Erlo TS25
400mm x 380mm T slot table
MT3 spindle taper
120mm spindle travel
2 speed ranges 1500, 3000 rpm
8 spindle speeds 65, 540, 125, 1055, 185, 1560, 365, 3060rpm
Adjustable height table
Forward and reverse
O.5kW motor
Guards
Mill vice
Three phase 16 amp plug

Sold Price

$1,675

View Listing
Erlo Gear Head Drill Press Sold Trade Me

Sold on: 3 Aug 2025

Erlo Gear Head Drill Press

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref X167340

Model: Erlo TS25
400mm x 380mm T slot table
MT3 spindle taper
120mm spindle travel
2 speed ranges 1500, 3000 rpm
8 spindle speeds 65, 540, 125, 1055, 185, 1560, 365, 3060rpm
Adjustable height table
Forward and reverse
O.5kW motor
Guards
Mill vice
Three phase 16 amp plug

Sold Price

$1,590

View Listing
Hafco Sandblasting Booth Sold Trade Me

Sold on: 3 Aug 2025

Hafco Sandblasting Booth

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref W167365

Hafco SB-420 Sandblasting Cabinet
Model: SB-420, Serial No: 033, Manufactured 12/2014
Large internal workspace visible through a shielded top window
Fitted with two glove ports, internal lighting, and dust extraction unit
Includes sandblasting gun, foot pedal control, and pair of gloves
Comes with a bag of blasting media
Single-phase power plug fitted
Metal construction with front access viewing and side access door
Ideal for surface preparation, rust removal, paint stripping, and restoration tasks

Sold Price

$1,561

View Listing
Cast Engineering Table Sold Trade Me

Sold on: 3 Aug 2025

Cast Engineering Table

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref T167388

Heavy-duty cast engineering table
30mm thick precision ground steel top
Solid cast iron frame for maximum stability
Heavy cross-bracing underneath for increased strength
Adjustable levelling feet for stable setup on uneven floors
Partial covers
Excellent workbench for engineering, fabrication, or machine shop use

Sold Price

$1,510

View Listing
Three Phase Drill Press Sold Trade Me

Sold on: 3 Aug 2025

Three Phase Drill Press

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref O167383

Shanghai No.5 Machine Tool Works bench drill, model H5-3C
Maximum drilling capacity 25mm
350mm diameter round tilting table with T-slots
3-phase 420V, 50Hz power supply
Motor power 0.85/1.1kW, full-load current 2.05/2.47A
Spindle speed range 125–2880rpm (9 speeds)
Manual feed with depth stop
Equipped with 13mm keyed drill chuck
Emergency stop
13mm keyless chuck
110mm spindle travel
Protective safety guard fitted
Sturdy cast iron base for stability
Used condition, signs of normal workshop use

Sold Price

$1,320

View Listing
Three Phase Linisher Sold Trade Me

Sold on: 3 Aug 2025

Three Phase Linisher

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref L167302

BM brand industrial linisher
150mm wide belt, 460mm long work area with door open
Fitted with AXEL JOHNSON TEKNIK A/S motor
Motor power: 4kW / 5.5HP, 400/230V, 50Hz, IP54 rating
Heavy-duty steel construction with integrated stand
Large flat platen for efficient grinding and finishing
Emergency stop button and safety guard fitted
3-phase motor with standard industrial plug
Well-suited for fabrication workshops and metalworking tasks
Condition appears tidy, all panels and guards in place

Sold Price

$1,310

View Listing
Scott Three Phase Gear Head Drill Press Sold Trade Me

Sold on: 3 Aug 2025

Scott Three Phase Gear Head Drill Press

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref R167334

Model: Z5025-1A Upright Drilling Machine
Maximum drilling diameter 25mm
380mm diameter table with T-slots
Spindle taper MT3
16mm keyless drill chuck fitted
Speed range: 100–2900rpm (8-step selection)
3-phase induction motor, 400V, 750/550W
Machine base with T-slots for extra rigidity
Includes operation manual
Mounted on concrete base
Safety interlock and emergency stop switch
Table height adjustment via crank handle
Manufacturer: Xin Yuan Electric Machine Co. Ltd

Sold Price

$1,250

View Listing
Welding Rotator Sold Trade Me

Sold on: 3 Aug 2025

Welding Rotator

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref Q168165

Manufacturer Matsumoto Kikai Co. Ltd.
Model PS1A-15.
300mm faceplate installed.
200mm chuck fitted to faceplate.
Motor type DC 85W.
Table speed 1RPM.
Table tilt range 0 to 90 degrees.
Load capacity horizontal 80kg.
Load capacity vertical 40kg.
Serial number 515385.
Methods Sydney Australia label present on case.
Foot pedal is attached to cable.
Straight and hold control lever present on front panel.
Includes attached power and control cables.

Sold Price

$1,223

View Listing
Lista Tool Cabinet with Drawers and Wheels Sold Trade Me

Sold on: 3 Aug 2025

Lista Tool Cabinet with Drawers and Wheels

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref S168271

Manufacturer is Lista AG.
Cabinet is blue in colour.
Features two front doors with integrated handle and lock.
Key is present for the lock.
Cabinet is fitted with four caster wheels for mobility.
Top surface has a textured black mat. Interior contains five metal drawers with perforated bases.
Cabinet is freestanding and not fixed to floor or wall.
Lista AG label is present on the top front edge.

Sold Price

$1,030

View Listing
Enerpac Hydraulic Cylinder Sold Trade Me

Sold on: 3 Aug 2025

Enerpac Hydraulic Cylinder

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref I168287

Enerpac hydraulic cylinder model C-254. Maximum pressure 10,000 PSI. 25 ton capacity.
Includes base mounting plate. Jonel Hydraulics label present.
Hydraulic connection fitting shown. Marked Enerpac 25 on cylinder body. No additional accessories included.

Sold Price

$1,020

View Listing
STA Machine Tool Cabinet Sold Trade Me

Sold on: 3 Aug 2025

STA Machine Tool Cabinet

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref C168281

LISTA Premium 75 tool cabinet.
Blue steel construction.
Seven drawers.
Mounted on four blue caster wheels.
Cabinet is currently locked and no key is included.

Sold Price

$960

View Listing
MEP Scorpio 300 Cold Saw Sold Trade Me

Sold on: 3 Aug 2025

MEP Scorpio 300 Cold Saw

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref R168270

MEP Scorpio 300.
Blade diameter is 300mm.
Blade speed 30/60 rpm.
Main electrical controls are Sprecher + Schuh KS3-16.
Motor rated at 2 HP, 415V, 3 phase, 50 Hz.
Machine is equipped with a vice for holding workpieces.
Electrical connection uses a 20A 500V plug.
Stand is included as part of the unit.

Sold Price

$935

View Listing
Amac Single Phase Jointer Sold Trade Me

Sold on: 3 Aug 2025

Amac Single Phase Jointer

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref T167336

AMAC jointer, model CT-200
Table width 220mm
Maximum cutting width 200mm
Heavy duty cast iron base and table construction
Fitted with fence and blade guard for safe operation
Shendian Electric D.O.L. starter, IP65 rating, 230V, 2HP motor
Emergency stop button installed
Standard NZ plug
Robust handwheel for table adjustment
Designed for woodworking applications including edge jointing and flattening
Used condition, machine shows minor cosmetic wear consistent with workshop use

Sold Price

$905

View Listing
Small Hydraulic Guillotine Sold Trade Me

Sold on: 3 Aug 2025

Small Hydraulic Guillotine

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref Q168269

W M Engineering sheet metal guillotine.
Cutting width is 1200mm.
Foot pedal operated mechanism.
Steel construction.
Machine includes upper and lower blades. Manual back gauge system.
Painted green exterior.
3 phase

Sold Price

$861

View Listing
Three Phase Shaper Sold Trade Me

Sold on: 3 Aug 2025

Three Phase Shaper

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref I167325

Model: B635-1 metal shaper
Table dimensions: 345mm x 300mm x 300mm
Max stroke length: 350mm
Supplied with an 185mm milling vice
Fitted with rotary table/vice mount
32 amp industrial plug for power connection
Heavy-duty cast iron construction
Manual controls and feed adjustments
Motors and electrics appear intact as shown
Includes handles and controls as pictured
Industrial workshop machine, suitable for metal shaping and slotting operations

Sold Price

$845

View Listing
TOS Three Phase Milling Machine Sold Trade Me

Sold on: 3 Aug 2025

TOS Three Phase Milling Machine

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref L167354

Made in Czechoslovakia by TOS Olomouc
1370mm x 300mm T-slot table for versatile workholding
Table, knee, and head have mechanical and manual controls
Spindle speed dial with clearly marked ranges 45 rpm up to 1400 rpm
Fitted with vertical head and NT40 spindle taper (ER collet style visible)
Safety spindle guard fitted to the front
Electric control panel with start/stop and feed direction control
Work lamp
Robust cast iron construction for stability
Table power feed doesn't go down
Previously used for friction steel welding

See this running:
https://youtu.be/mW0c5Xp4WV8

Sold Price

$820

View Listing
Luxcut Drill Bit Grinder Sold Trade Me

Sold on: 3 Aug 2025

Luxcut Drill Bit Grinder

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref Q167385

Luxcut Drill Bit Grinder DG 20
Item No: 310 0020
Single phase, 230V, 50Hz motor
Adjustable speed up to 7,500 rpm
Suitable for grinding standard, hard, and soft drill bits
Point angles: 118°, 130°, 140° depending on material
Grinds steel, cast iron, cast steel, Al-alloys, CuZn-alloy, austenitic steel, magnesium alloy, zinc-alloy
Comes with robust clamping and adjustable holders
Emergency stop for safety
Compact, bench-top design
Well-labeled settings guide on front panel
Supplier: Scott Machinery, Christchurch, New Zealand
Condition visibly used with signs of cosmetic rust and dust on holders and base

Sold Price

$790

View Listing
Manual Sheet Metal Rollers Sold Trade Me

Sold on: 3 Aug 2025

Manual Sheet Metal Rollers

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref B167344

1280mm wide rollers
Approx 75mm diameter rollers

Sold Price

$780

View Listing
Thermal Dynamics Plasma Welding Console Sold Trade Me

Sold on: 3 Aug 2025

Thermal Dynamics Plasma Welding Console

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref H167350

Thermal Dynamics WC 100B Plasma Welding Console
Includes torch, hose, and connection cables as shown
Paired with Miller Radiator 2A cooling system, 230V, 2.1A, 1Ph, 50Hz
Front panel with controls for settings, coolant flow meters, and power indicators
Cooling unit features easy access controls, coolant flow indicator, and robust construction
Good condition with minor cosmetic wear from typical workshop use

Sold Price

$720

View Listing
Three Phase Pantograph Sold Trade Me

Sold on: 3 Aug 2025

Three Phase Pantograph

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref J167326

GHA Alexander Model 3A Pantograph
British made by George H. Alexander Machinery Ltd
Includes two T-slot tables: 345mm x 200mm and 450mm x 320mm
Cutter head speed chart

Sold Price

$695

View Listing
Large Double Sided Workbench with Vices  Sold Trade Me

Sold on: 3 Aug 2025

Large Double Sided Workbench with Vices

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref M167303

Heavy-duty workshop bench
Worktop dimensions: 1640mm x 920mm
Bench height: 890mm
Solid timber frame construction with thick work surface
Fitted with four Record brand vices: 2 x No.84, 1 x No.4, 1 x No.35O models
Integrated tool holders
Lower shelf for storage
Ideal for engineering, metalwork, or general workshop use
Functional and sturdy, showing typical signs of workshop use

Sold Price

$690.50

View Listing
Tool Cabinet and Contents Sold Trade Me

Sold on: 3 Aug 2025

Tool Cabinet and Contents

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref M167355

Lista AG machine tooling cabinet with contents included
Heavy-duty steel construction
Equipped with two large compartmentalised drawers and one large lower drawer/tray
Internal drawer dividers and organisers installed
Cabinet sits on four castor wheels for easy mobility
Textured non-slip rubber mat on top surface
Contents include assorted hand tools and workshop items as shown
No key supplied
Used condition with some marks and wear consistent with workshop use

Sold Price

$685

View Listing
Dyco Single Phase Drill Press Sold Trade Me

Sold on: 3 Aug 2025

Dyco Single Phase Drill Press

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref U167363

Dyco bench drill press, made in New Zealand
Six speed DP2 model with belt drive
Speed range: 280, 465, 770, 1275, 2110, 3500 RPM
Table size 260mm x 270mm
100mm spindle travel
Motor: Brook Crompton Betts 370W, single phase, 240V
Fitted with standard 3-pin NZ/AU plug
Manual up/down spindle feed with three-arm handle
Includes table clamp as pictured
Solid cast iron base for stability
Shows general wear from use, see photos for condition

Sold Price

$675

View Listing
Sand Blasting Cabinet Sold Trade Me

Sold on: 3 Aug 2025

Sand Blasting Cabinet

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref V167338

Hafco Metalmaster sandblasting cabinet model SB-375
1.2kW motor, 240V power
Cabinet weight 90kg
Air capacity 340L/min
Integrated dust collector
Large front access window with protective guard
Internal gloves and perforated steel work tray
Control panel with power, light, and dust collection switches
Pressure gauge (piezometer)
Air regulator fitting is missing
Serial No: 001, Mfg date 09/2015
Unit was operating previously
Good overall condition with signs of normal workshop use

Sold Price

$666.30

View Listing
Trolley of NT40 Tooling Sold Trade Me

Sold on: 3 Aug 2025

Trolley of NT40 Tooling

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref M168187

NT40 mill tooling trolley with heavy duty steel construction and lockable castor wheels
Includes 16x NT40 tool holders and collets, with a variety of attached tooling
Examples include drill chucks, ER collet chucks, face mill arbor, shell mill holders, and end mill holders
Tooling holder rack designed to suit NT40/BT40 taper
SHUTER brand trolley, features 2-tier tool inserts and top tray for additional tools or accessories
Ideal for CNC or manual milling machine setups needing mobile storage and quick access

Sold Price

$660

View Listing
TOS Milling Machine Indexing Head Sold Trade Me

Sold on: 3 Aug 2025

TOS Milling Machine Indexing Head

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref E167321

TOS Type DU25
160mm three jaw chuck
Tail stock
Very tight, needs freeing up

Sold Price

$657

View Listing
Heltos Heavy Duty Three Phase Drill Sold Trade Me

Sold on: 3 Aug 2025

Heltos Heavy Duty Three Phase Drill

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref B167396

Heltos VS20B industrial pillar drill
Made in Czechoslovakia, year 1988
Three phase, 1.5kW main motor, MEZ Mohelnice motor
Two speed ranges, 12-speed gearbox, forward and reverse
Spindle speeds 112–2800rpm
MT3 spindle taper
Approx 170mm spindle travel
340mm x 460mm table, 180mm milling/drilling vice included
Integrated coolant pump
Fitted with 20A 500V 5-pin plug
Clear speed/feed charts and robust, heavy-duty construction

Sold Price

$655

View Listing
Large Double Sided Workbench with Vices  Sold Trade Me

Sold on: 3 Aug 2025

Large Double Sided Workbench with Vices

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref N167356

Heavy-duty workshop bench
Worktop dimensions: 1640mm x 920mm
Bench height: 890mm
Solid timber frame construction with thick work surface
Fitted with four Record brand vices: 1 x No.6 and 3 x No.84 models
Integrated tool holders for files and screwdrivers
Lower shelf for storage
Ideal for engineering, metalwork, or general workshop use
Functional and sturdy, showing typical signs of workshop use

Sold Price

$635

View Listing
Bosch Knibbler Sold Trade Me

Sold on: 3 Aug 2025

Bosch Knibbler

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref K167353

Bosch GSC 2.8 electric knibbler
500W motor, 240V, 2.8mm cutting capacity
No-load speed 2400 min⁻¹
Suitable for cutting sheet metal and corrugated materials
Industrial quality, made in Germany
Model number: 0 601 506 137

Sold Price

$630

View Listing
Steel Top Workbench with Two Drill Presses Sold Trade Me

Sold on: 3 Aug 2025

Steel Top Workbench with Two Drill Presses

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref P167384

Double pedestal drill press workstation with heavy-duty steel frame and 3mm steel top
Features two drill presses: Meteor Manufacturing & Engineering Co. (Auckland) Model 9766 and Masport
Meteor drill fitted with Crompton Parkinson 0.5HP motor, 220/240V, 3.8A, single phase, 1425 RPM
270mm x 250mm table
110mm spindle travel
Masport drill fitted with EMAIL/Westinghouse 0.5HP motor, 230/250V, 3.5A, single phase, 1420 RPM
Masport spindle speed options: 3500, 2110, 1275, 770, 465, 280 RPM
255mm x 260mm table
Approx 100mm spindle travel
Both drills equipped with operator safety guards and on/off switch panels
Power cables included, fitted with single-phase plugs

Sold Price

$615

View Listing
Bramley Bench Top Finger Folder Sold Trade Me

Sold on: 3 Aug 2025

Bramley Bench Top Finger Folder

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref P168294

Bramley finger folder.
595mm folding width.
8 x fingers for adjustable folding width configuration.
Manual lever operation.
Base has mounting holes for securing to workbench.
Metal construction with blue and grey painted surfaces.
Handle features a black plastic grip.
Manufacturer Bramley, Herberts Engineering Ltd, Auckland, New Zealand.

Sold Price

$600

View Listing
Lista Tool Cabinet with Drawers and Wheels Sold Trade Me

Sold on: 3 Aug 2025

Lista Tool Cabinet with Drawers and Wheels

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref T168272

Lista branded tool cabinet.
Blue steel construction.
Seven drawers with metal handles.
Each drawer features a metal perforated insert tray.
Locking mechanism with key included.
Mounted on four swivel castor wheels.
Top surface features removable black ribbed mat.
Cabinet is mobile and suitable for workshop storage.
No accessories or contents are included.

Sold Price

$580

View Listing
WIA Single Phase MIG Welder on Trolley Sold Trade Me

Sold on: 3 Aug 2025

WIA Single Phase MIG Welder on Trolley

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref S167309

WIA Weldmatic 190 MIG welder on green metal trolley with shelving
Maximum output: 190A, operates on 240V 50Hz single phase power
Duty cycle: 15% @ 190A, 25% @ 145A, 100% @ 72A
Wire feed and voltage control with coarse and fine adjustment
Includes MIG torch, earth clamp, gas hose, spool of wire, regulator
Supports gasless flux-cored and solid wire operation, spool inside unit
Settings and guide chart included inside the wire compartment
Rated input current: 14.4A, maximum input current: 36A
IP21 rating, suitable for workshop and light industrial use
Unit is mounted on a sturdy rolling trolley for easy mobility

Sold Price

$565

View Listing
Nissan SR20 Engine on Stand Sold Trade Me

Sold on: 3 Aug 2025

Nissan SR20 Engine on Stand

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref Y167393

Nissan SR20 fuel injected engine with double overhead cam configuration
Includes engine computer (ECU) with clearly labeled interface for educational use
Mounted on a heavy-duty steel stand suitable for engine operation or display
Previously used for automotive training and demonstration purposes
Visible Nissan 53J engine block marking
Wiring harness present with educational labeling on connections
Alternator and flywheel included as pictured
Large separate steel base frame also included (shown in final images)
Throttle body and some intake components removed as shown
Condition is consistent with workshop and instructional use

Sold Price

$550

View Listing
2 x Quick Change Lathe Tool Posts Sold Trade Me

Sold on: 3 Aug 2025

2 x Quick Change Lathe Tool Posts

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref N167382

Set of 12 quick change tool holders for lathe use
Includes two adjustment wrenches
Mixed styles, mostly steel construction, heavy-duty industrial quality
Visible surface rust present but all appear intact and functional
See photos for included types and overall condition

Sold Price

$535

View Listing
Adjustable Boring and Facing Head Sold Trade Me

Sold on: 3 Aug 2025

Adjustable Boring and Facing Head

SKYLARC'S AUCKLAND ENGINEERING AUCTION

Skylarc Ref N168266

MT2 boring head included.
MT3 adapter supplied.
Boring head engraved with 'Made in Germany.'
Adjustment dial on the head.
Boring bar fitted to boring head.

Sold Price

$532.55

View Listing
Show 60 240 All per page