← Back to Auctions

SKYLARC'S TORDEICH ENGINEERING AUCTION

Auction Ended: Sunday, 12 October 2025

Showing 1–60 of 244 products

Reutlinger Losenhausen EasyBalance 2.2 Dynamic Balancing Machine Sold Trade Me

Sold on: 12 Oct 2025

Reutlinger Losenhausen EasyBalance 2.2 Dynamic Balancing Machine

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref A154174

Reutlinger Losenhausen dynamic balancing machine
EasyBalance 2.2 balancing instrumentation
BalanceMasters Inc. control module installed
Laptop with EasyBalance 2.2 software
Balance system includes shaft and V-block supports
Measurement scale present on rotating assembly
Power control switch installed on main cabinet
Included tool and fastener tray on bed
Pair of steel mandrels located on machine bed
Has been balancing up to 200mm diameter
Was running at
2400mm long bed
Was running until recently but now will only go in demo mode.

Sold Price

$10,515

View Listing
Hwacheon HL-580 x 2000G Centre Lathe Sold Trade Me

Sold on: 12 Oct 2025

Hwacheon HL-580 x 2000G Centre Lathe

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref O154188

Model HL-580 x 2000G
Serial number 253009
Manufactured March 2005
Swing over bed 580 mm
Swing over cross slide 360 mm
Distance between centres 2000 mm
Spindle nose ASA A1-8 D1-8
Spindle bore 77 mm
Spindle speeds 28 to 1350 rpm
3 phase 415V power supply
Main spindle motor 15 hp
Total power 11 kW
Fagor digital readout system but has no sensor slides fitted
350mm four jaw chuck
310mm three jaw chuck
450mm faceplate
Fixed steady
Travelling steady
1540mm x 835mm x 1340mm tall workbench
Manual
Some tooling and accessories
Hwacheon Machinery Works Co Ltd manufacturer
Made in Korea

To see this machine running:
https://youtu.be/xmk2RQyb4Dg

Sold Price

$10,050

View Listing
Hydraulic Keyway Broaching Press Sold Trade Me

Sold on: 12 Oct 2025

Hydraulic Keyway Broaching Press

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref Q170224

Table dimensions 665mm x 665mm
340mm ram travel
45mm diameter ram end
Three phase with roroll style plug
Hydraulic pump and tank integrated into cabinet
Large numbers of keyway broach collets
Will be electrically disconnected but buyer will be to decommission hydraulic lines and oil for transport

To see this machine running:
https://youtu.be/NY8Vbo__XSg

Sold Price

$5,550

View Listing
Nukor NKC-SL-4.5-TDF Scroll Air Compressor Sold Trade Me

Sold on: 12 Oct 2025

Nukor NKC-SL-4.5-TDF Scroll Air Compressor

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref G170240

Model:Nukor NKC-SL-4.5-TDF
Scroll air compressor type
Year of manufacture is 2018
Three phase
Power rating is 4.5kW
Output is 660 litres per minute
Air cooler dryer
Receiver tank capacity is 75 litres
Digital control panel with runtime hour meter
Motor hours on display 2130 hours
Load hours on display 2045 hours
Service record dated 15-11-2023
Hours at last service 1725

Sold Price

$5,050

View Listing
Varnamo EV-3 Shaping Machine Sold Trade Me

Sold on: 12 Oct 2025

Varnamo EV-3 Shaping Machine

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref L154185

Manufacturer Varnamo Maskinaktiebolag Sweden
Model EV-3
Serial number 6307
Six stroke rate settings 22 30 41 54 71 100 strokes per minute
300mm x 455mm long x 320mm table
230mm vise attached to table
Lever and handwheel controls
Three phase motor fitted
Operating instructions booklet for type EV-3 serial number 6307 included
Instruction and lubrication plates present on body
JAS J Niven and Co Ltd listed as sole agents
Rectangular work table with T-slots
Exceptional tidy swedish machine

To see this machine running:
https://youtu.be/p2gow_XjKEw

Sold Price

$4,290

View Listing
TOS Trencin SN-50B Lathe Sold Trade Me

Sold on: 12 Oct 2025

TOS Trencin SN-50B Lathe

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref N154187

Model SN-50B manufactured by TOS Trencin
Made in Czechoslovakia
Swing over bed 500mm
Swing over carriage 270mm
Distance between centres 2060mm
Turning length 2000mm
305mm four jaw chuck included
270mm three jaw chuck included
MT5 tailstock
Includes steady rest
Includes follow rest
Includes face plate
Damage present to removable bed block as shown in photos but on tailstock vee so accuracy not effected
Weight of machine with standard equipment is 1845kg
1550mm x 680mm x 1400mm workbench
Driving dogs
Manual
Some tooling and accessories

To see this machine running:
https://youtu.be/Md7Top6l6Iw

Sold Price

$4,210

View Listing
Dabrowska KNA 110 Single Column Vertical Lathe Sold Trade Me

Sold on: 12 Oct 2025

Dabrowska KNA 110 Single Column Vertical Lathe

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref Z154173

Manufacturer Dabrowska Fabryka Obrabiarek
Model KNA 110
Type Single column vertical turning and boring lathe
Made in Poland
Made 1965
Diameter of face plate 1100 mm
Speed range 4.5 to 140 rpm
Vertical travel of the tool head 600 mm
Vertical travel of the crossrail 800 mm
Number of tool holes in turret 5
Number of feeds of upper and side saddle 12
Feed of saddle 0.21 - 1.0 mm/rev
Feed of crossrail 180 mm/min
Feed of upper saddle 500 mm/min
Cabinet of change gears
Some tooling
Tidy heavy duty machine rarely available
You will need your own lifting equipment to load this machine unless we're delivering it (11 ton)

To see this machine running:
https://youtu.be/IP5XppzasUs

Sold Price

$4,020

View Listing
Sunderland No.19 Gear Planer Sold Trade Me

Sold on: 12 Oct 2025

Sunderland No.19 Gear Planer

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref P154189

Sunderland Gear Planer No. 19
Manufacturer J. Parkinson & Son Shipley England
Will cut spur gears up to 56 inch by 9 inch by 1.5 DP
Smallest root diameter by standard cutter is 1.75 inch
Will cut spiral gears up to a 60 inch 1.5 inch normal pitch
Greatest distance end of spindle to outer support 26 inch
Double helical gear cutting head
Hole through spindle 4"
Diameter of arbor 3"
Diameter of face plate 24"
Made in England
Includes manuals,tooling and charts
Includes arbor supports and accessories
Rack of tooling and accessories
You will need your own lifting equipment to load this machine unless we are transporting it

To see this machine running:
https://youtu.be/2P8v5BkThy8

Sold Price

$1,830

View Listing
Fellows 6A-Type Gear Shaper Sold Trade Me

Sold on: 12 Oct 2025

Fellows 6A-Type Gear Shaper

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref I170242

Fellows 6A-Type Gear Shaper machine.
Manual gear shaper for producing precision gears.
Comes with box of change gears.
Parts List, Service repair book and operators manual
Main drive with speed change gearbox and two-step sheave drive.
Strokes per minute of cutter available from 50 to 300 depending on belt and lever combinations with 1800 RPM motor speed.

To see this machine running:
https://youtu.be/bITiTH6VlhQ

Sold Price

$1,800

View Listing
Kasto Mechanical Hacksaw Sold Trade Me

Sold on: 12 Oct 2025

Kasto Mechanical Hacksaw

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref I167351

Kasto Mechanical Hacksaw
Blade length 490mm
Robust steel construction
Manual and automatic operation controls
Hydraulic vise and feed for precision cutting
Powered by a 3-phase electric motor
Large infeed/outfeed supports for long materials
Control panel with emergency stop and settings
3-phase, 20A 500V
Vise and guides adjustable for holding various workpiece sizes
Reference chart for feeds and materials included on machine
Suitable for cutting steel bar, pipe

Sold Price

$1,520

View Listing
25x Assorted Gear Cutters Sold Trade Me

Sold on: 12 Oct 2025

25x Assorted Gear Cutters

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref L170245

25x Assorted Gear Cutters.
Diameters from approx 80mm to approx 107mm.
Most are wrapped in pladtic so unable able to see ID markings.
Condition varies with each unit. Most appear well maintained.

Sold Price

$1,500

View Listing
Behringer HSA-260 Metal Cutting Hacksaw Sold Trade Me

Sold on: 12 Oct 2025

Behringer HSA-260 Metal Cutting Hacksaw

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref Q154190

Behringer HSA-260
Blade length 430mm
Some spare blades
Three phase 1.9kW motor
Control panel with push button controls and emergency stop
Saw vice and feed rollers included
Dual hydraulic vices
Three phase.

To see this machine running:
https://youtu.be/_95EwE0X29g

Sold Price

$1,265

View Listing
Metal Drawer Set with Assorted Taps and Threading Tools Sold Trade Me

Sold on: 12 Oct 2025

Metal Drawer Set with Assorted Taps and Threading Tools

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref Y170128

Metal drawer set with twelve green drawers labelled for thread types and sizes.
Contents include assorted metric taps such as M25x1.5 M24x1.5 M24x2 M22x1.5 M18x1.5 and M16x1.5.
Drawers labelled for UNF UNC BSP NPT and metric threads.
Assorted BSP taps including 3/8 BSP and 1/2 BSP.
NPT taps present including 3/8 NPT and 1/4 NPT.
UNF and UNC taps visible in multiple sizes such as 5/16-18 UNF-2B.
Brands identified include Dormer Sutton and Somta.
Taps are supplied in original manufacturer cases and loose.
Metal drawer units and tap cases included.

Sold Price

$1,150

View Listing
Eagle Surface Grinder Sold Trade Me

Sold on: 12 Oct 2025

Eagle Surface Grinder

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref Y154198

Eagle Surface Grinding Machine model 3W-1976
Table size is 360mm x 130mm
Manual operation
Three phase power required
Fitted with Roroll plug
Grinding spindle lubrication specified as Spherol AP.2
Lubrication for slideways specified as Magna ZA
Table moves smoothly
Manufactured by Victa Engineering Co
200mm grinding wheel

Sold Price

$850

View Listing
Tecma SCV 1276 Machine Vice with 125mm Jaws Sold Trade Me

Sold on: 12 Oct 2025

Tecma SCV 1276 Machine Vice with 125mm Jaws

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref O170222

Tecma SCV 1276 self centering machine vice.
Jaw width is 125mm.
Moveable jaw operated by screw mechanism with handle.
Base plate included as shown.
Comes with 14mm socket and driver
Mounted on steel plate

Sold Price

$790

View Listing
Takisawa TS-20 CNC Lathe Sold Trade Me

Sold on: 12 Oct 2025

Takisawa TS-20 CNC Lathe

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref G154180

Model Takisawa TS-20 CNC Lathe
Machine No. THFW5385
Main motor rated at 18.5 kW
Three phase
Swing over bed 500mm
Maximum turning diameter 300mm
Standard turning diameter 210mm
Maximum turning length 560mm
Hole through spindle 60mm
Spindle speed range 32–3200 RPM
Tool turret with 12 stations
Turning tool size 25x25mm
Boring bar diameter 50mm
X-axis travel 170mm
Z-axis travel 620mm
Rapid traverse
250mm three jaw chuck
Machine weight 4300kg
Fanuc controller
Range of chuck jaws
Some tool holders
Manufactured 1985
You will need your own lifting equipment to load this machine.

To see this machine running:
https://youtu.be/Nhpvu4aaYNE

Sold Price

$705

View Listing
2 x Fellows England Type 7125A Gear Shaping Machines Alfred Herbert Sold Trade Me

Sold on: 12 Oct 2025

2 x Fellows England Type 7125A Gear Shaping Machines Alfred Herbert

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref T154193

Includes two Fellows England Type 7125A gear shaping machines.
Manufactured by Alfred Herbert.
Some manuals
Maximum pitch diameter external spur 10 inches at 6 D.P.
Maximum pitch diameter external helical 7 inches at 6 D.P.
Maximum pitch diameter internal spur or helical 6 inches at 6 D.P.
Maximum face width 2 inches.
Maximum helix angle 45 degrees.
Maximum overall length 4 feet 3 inches.
Number and range of cutting speeds six from 156 to 515 strokes per minute.
Cutter feeds per stroke from 0.006 to 0.0013 inches per inch diameter of cutter.
Motor 1.5 HP at 960 RPM.
Includes change gears as shown.
Includes some accesories
Feed and gear change charts attached to machine.

To see this machine running:
https://youtu.be/j_rGgWCFJQ4

Sold Price

$695

View Listing
Takisawa TX-3 CNC Lathe with Tsubaki Chip Conveyor Sold Trade Me

Sold on: 12 Oct 2025

Takisawa TX-3 CNC Lathe with Tsubaki Chip Conveyor

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref H154181

Takisawa TX-3 CNC lathe
Serial number TLNT0176
Manufacture year 1980
Model IX-310D
1500mm bed length
Fanuc control with CRT display
Equipped with Tsubakimoto-Mayfran IX310D-1000 chip conveyor
Manuals included for Fanuc spindle servo unit and maintenance
8-position turret tool changer
Includes various tool holders and lathe components as shown
New spare NSK ball screw included
Assortment of spares and fixtures included
Large range of chuck jaws
Tool holders
Accessories
You will need your own lifting equipment to load this machine unless we are delivering it

To see this machine running:
https://youtu.be/1cV76rE24as

Sold Price

$660

View Listing
6x BT40 Tool Holders w/ ER32 Collet Chucks Sold Trade Me

Sold on: 12 Oct 2025

6x BT40 Tool Holders w/ ER32 Collet Chucks

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref Q110096

6x BT40 Tool Holders w/ ER32 Collet Chucks.
Includes:
- 1x AW branded holder type BT40-ER32-60.
- 1x Rego-Fix Swiss-Line branded holder type BT40/ER32 060 H 4140 13230.03.
- 3x Sandvik Coromant Holders type 392.5 BT40 32 080.
- 1x unknown brand holder with illegible ID markings.
- Rego-Fix ER32 Chuck ring wrench.

Sold Price

$625

View Listing
Keyway Broach Set HSS Hassay Savage and Dumont Sold Trade Me

Sold on: 12 Oct 2025

Keyway Broach Set HSS Hassay Savage and Dumont

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref T170227

Three keyway broaches included in this set.
One marked HASSAY SAVAGE HSS USA 3/8 IV.
One marked DUMONT 7/16 D HSS MADE IN USA.
One marked HASSAY SAVAGE HSS USA 1/2 IV.
Material is high speed steel.

Sold Price

$610

View Listing
SOCO MC275F Cold Saw Circular Metal Cutting Machine Sold Trade Me

Sold on: 12 Oct 2025

SOCO MC275F Cold Saw Circular Metal Cutting Machine

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref J154183

SOCO MC275F metal cutting circular saw.
Manufacturer: SOCO Machinery Co Ltd.
Date of manufacture: April 20, 2000.
3 phase motor.
260mm blades
Two speeds. 60 and 120rpm
Blade guard and work vice included.
Manual included
415V 20A 3-phase plug fitted.
Made in Taiwan.

To see this machine running:
https://youtu.be/URBeFBsczQ0

Sold Price

$605

View Listing
4x BT40 Tool Holders w/ Assorted Chuch Attachments Sold Trade Me

Sold on: 12 Oct 2025

4x BT40 Tool Holders w/ Assorted Chuch Attachments

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref V170099

4x BT40 Tool Holders w/ Assorted Chuch Attachments.
Includes:
- 2x Laip holders type No.1912530203.
- 2x unknown brand Holders type TH2/BT40.
- 14x chuck inserts of various types, see photos.

Sold Price

$600

View Listing
7x Laip BT40 Morse Taper Drill Holders Sold Trade Me

Sold on: 12 Oct 2025

7x Laip BT40 Morse Taper Drill Holders

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref S170096

7x Laip BT40 Morse Taper Drill Holders.
All are Laip branded.
Includes the following size types:
- 2x No.4 drill shank size holders, type No.0312120250.
- 2x No.3 drill shank size holders, type No.0312120240.
- 1x No.2 drill shank size holders, type No.0312120230.
- 2x No.1 drill shank size holders, type No.0312120220.

Sold Price

$600

View Listing
3 x Keyway Broaches Sold Trade Me

Sold on: 12 Oct 2025

3 x Keyway Broaches

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref X170231

Includes three broaches.
Hassay-Savage HSS USA 12MM IV broach marked 11412.
Hassay-Savage HSS USA 10mm IV broach.
duMONT Minute Man 8MM-C broach Made in USA.
Each broach features cutting teeth for keyway or slotting operations.
All broaches are high speed steel.
Broach sizes are 12mm IV, 10mm IV, and 8MM-C.

Sold Price

$580

View Listing
5x BT40 ER32 Collet Chuck Tool Holders Sold Trade Me

Sold on: 12 Oct 2025

5x BT40 ER32 Collet Chuck Tool Holders

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref S110098

5x BT40 ER32 Collet Chuck Tool Holders.
All are Sandvik Coromant branded.
Unfortunately type markings on all 5 are illegible.
ER32 Collet Chucks.
Black cylinder length to end of threads is approx 65mm.
Includes attached Cutters..

Sold Price

$570

View Listing
Assorted Spiral Flute Taps Sold Trade Me

Sold on: 12 Oct 2025

Assorted Spiral Flute Taps

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref F170057

Assorted Spiral Flute Taps.
Assorted sizes and types see photos.
Condition varies greatly with each unit, some appear as new, others show varying levels of use.

Sold Price

$560

View Listing
Assorted Lathe Turning, Grooving, Boring Tools Sold Trade Me

Sold on: 12 Oct 2025

Assorted Lathe Turning, Grooving, Boring Tools

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref M170064

Assorted Lathe Turning, Grooving, Boring Tools.
Includes:
- Kyocera Radius tool type PRXCR2525M-10, includes 3x spare inserts, hex keys, and box.
- Sandvik Coromant 180mm long boring bar type R166.0KF-20-22, with non-original case.
- Sandvik Coromant 140mm long turning tool type R166.0FG-2525-22, with case.
- Unknown brand 150mm long turning tool type PCLNR 2525M12.
- Sandvik Coromant Grooving Tool holder that has been cut shorter, partial type number visible is 5412 1 0-02.
- Sandvik Coromant 150mm long Grooving bar type 151.2-25-50, with case.
- Sandvik Coromant 150mm long Grooving bar type 151.2-25-30, with case.

Condition varies with each item

Sold Price

$540

View Listing
5x BT40 ER32 Collet Chuck Tool Holders Sold Trade Me

Sold on: 12 Oct 2025

5x BT40 ER32 Collet Chuck Tool Holders

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref T110099

5x BT40 ER32 Collet Chuck Tool Holders.
All are Sandvik Coromant branded.
Unfortunately type markings on all 5 are illegible.
ER32 Collet Chucks.
Black cylinder length to end of threads is approx 65mm.
Includes attached Cutters..

Sold Price

$525

View Listing
Hassay-Savage HSS Broaches 14mm 16mm 18mm Sold Trade Me

Sold on: 12 Oct 2025

Hassay-Savage HSS Broaches 14mm 16mm 18mm

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref Y170232

Three broaches included
Brand is Hassay-Savage
Material is high speed steel
Country of manufacture is USA
One broach is marked 14mm IV
One broach is marked 16mm V
One broach is marked 18mm V
All broaches have serrated cutting edges
16mm has broken end

Sold Price

$520

View Listing
Broach Set Hassay Savage Steelmans Sold Trade Me

Sold on: 12 Oct 2025

Broach Set Hassay Savage Steelmans

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref R170225

Broach set includes five broaches.
One broach marked MONTV 1/8-B H.S.
One broach marked HASSAY SAVAGE 3/16-II 10212 U.S.A.
One broach marked Steelmans size 5/32-B.
One broach marked HASSAY SAVAGE HSS U.S.A. 2mm.
One broach marked HASSAY SAVAGE 3mm-I 11103 U.S.A.
Plastic protective tubes included for storage.

Sold Price

$511.70

View Listing
22mm Keyway Broach Sold Trade Me

Sold on: 12 Oct 2025

22mm Keyway Broach

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref V170229

Unknown brand
22mm keyway broach
High speed steel

Sold Price

$508.65

View Listing
Great Captain DIA-BOWL 8 Cutter Grinding Machine Sold Trade Me

Sold on: 12 Oct 2025

Great Captain DIA-BOWL 8 Cutter Grinding Machine

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref Z154199

Great Captain DIA-BOWL 8 cutter grinding machine
Manufactured by Murahashi MFG Co Ltd Gifu Japan
550mm table travel
Fitted with two Kinik grinding wheels
Equipped with table-mounted workholder
Single phase
Motor specification: 0.37kW 0.50HP 1340rpm 240V 2.75A 50Hz
Table-mounted handwheel controls
Three-prong power plug attached

To see this machine running:
https://youtu.be/FuGjcugobBQ

Sold Price

$506

View Listing
Hassay-Savage and duMONT Keyway Broaches Sold Trade Me

Sold on: 12 Oct 2025

Hassay-Savage and duMONT Keyway Broaches

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref W170230

Set of five keyway broaches.
Three broaches are marked as Hassay-Savage HSS U.S.A. 5mm III, Hassay-Savage HSS U.S.A. 6mm III, and Hassay-Savage HSS U.S.A. 7MM-111.
Two broaches are marked as duMONT 4MM-B-1 H.S. and duMONT 5MM-B-1 H.S.
Material is high speed steel.
Sizes included are 4mm, 5mm, 6mm, and 7mm.

Sold Price

$505

View Listing
7x Gear Cutters by Acedes Sold Trade Me

Sold on: 12 Oct 2025

7x Gear Cutters by Acedes

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref J170243

Set of 7 gear cutters by Acedes.
One cutter marked 5/8 inch pitch 0.400 inch roller diameter ASP2023 20 teeth in cutter BSS REF 12/54/0502.
One cutter marked Acedes Gear Tools 104/31.
One cutter marked Acedes 102/5927 E2 2728 stock number 104145.
One cutter marked 0.625 inch R 85 228 Sprocket NON TPG 12 teeth.
One cutter marked Acedes 104/29 34 teeth 0.2400 inch CD.
One cutter marked 25 teeth 0.2700 inch CD 0.375 inch roller BS228 Sprocket NON TPG.
One cutter marked Acedes 104/33 17 teeth 0.4220 inch CD.
Manufactured by Acedes Gear Tools, England.
Cutters are either new and unused with original wax coating, or unwaxed but appear unused, see photos.

Sold Price

$505

View Listing
4x BT40 Tool Holders w/ ER25 and ER40 Collet Chucks Sold Trade Me

Sold on: 12 Oct 2025

4x BT40 Tool Holders w/ ER25 and ER40 Collet Chucks

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref R110097

4x BT40 Tool Holders w/ ER25 and ER40 Collet Chucks.
Includes:
- Sandvik Coromant ER25 holder, unable to decipher ipher ID markings.
- Laip ER40 holder type 0412010206.
- 2x Rego-Fix Swiss Line holders type BT40/ER40x080.
- 1x Rego-Fix E40 wrench.
- 1x Rego-Fix E25 wrench.

Sold Price

$485

View Listing
5x Morse Taper Drills, large Metric Sizes Sold Trade Me

Sold on: 12 Oct 2025

5x Morse Taper Drills, large Metric Sizes

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref V170073

5x Morse Taper Drills, large Metric Sizes.
Sizes include 36mm, 44mm, 44.5mm, 47mm, and 55mm.
55mm drill has No.5 size shank, all others have No.4 Shanks.
Condition varies between each drill.

Sold Price

$485

View Listing
Selectron Industries Fly Press Sold Trade Me

Sold on: 12 Oct 2025

Selectron Industries Fly Press

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref V154195

Selectron Industries fly press.
Model C.
Serial number 495.
Approx 140mm stroke
Manual operated press.
350mm x 290mm plate

Sold Price

$480

View Listing
Large Lot of Go-No Go Gauges Sold Trade Me

Sold on: 12 Oct 2025

Large Lot of Go-No Go Gauges

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref T170149

Metric and imperial sizes
Most and wrapped for transport
Approx 40
Largest metric 65mm
Largest imperial 2"

Sold Price

$480

View Listing
6x BT40 Tool Holders w/ Attachments Sold Trade Me

Sold on: 12 Oct 2025

6x BT40 Tool Holders w/ Attachments

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref W170100

6x BT40 Tool Holders w/ Attachments.
Includes:
- 2x Laip holder type No.1912530202.
- 4x unknown brand Holders, all type TH1/BT40.
- Assorted attachments for Holders Chucks, see photos.

Sold Price

$465.15

View Listing
29x Morse Taper No.1 Drills, Metric & Imperial Sizes Sold Trade Me

Sold on: 12 Oct 2025

29x Morse Taper No.1 Drills, Metric & Imperial Sizes

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref R170069

29x Morse Taper No.1 Drills, Metric & Imperial Sizes.
Sizes range from 5/32" to 14mm.
Condition varies with each drill. Most appear in excellent condition with others showing more moderate usage.
All have No.1 Tapered Shanks.

Sold Price

$455

View Listing
Assorted Industrial Sprockets and Chain Wheels Sold Trade Me

Sold on: 12 Oct 2025

Assorted Industrial Sprockets and Chain Wheels

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref T171423

Large quantity of assorted industrial sprockets and chain wheels
Various sizes and tooth counts observed
Sprockets include both single and double row types
Some sprockets packed in plastic wrapping
Several boxes and containers with additional sprockets and chain wheels
Items include both unused and used components
Mixture of black and metallic finishes
Lot contains a range of diameters and thicknesses

Sold Price

$425

View Listing
Steel Frame Workbench with Vice Sold Trade Me

Sold on: 12 Oct 2025

Steel Frame Workbench with Vice

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref B170183

Steel frame workbench with timber top
Workbench includes a lower timber storage shelf
1000mm worktop height
Fitted with Record No.5 bench vice
Bench vice is bolted to one end of the workbench
Includes tool setter mounted on top
Workbench has diagonal steel bracing for stability
Timber planks form both the work surface and storage shelf

Sold Price

$415

View Listing
Broaches Hassay Savage and Dumont Sold Trade Me

Sold on: 12 Oct 2025

Broaches Hassay Savage and Dumont

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref S170226

Includes four broaches.
Three broaches are Hassay Savage brand.
One broach is Dumont brand.
Hassay Savage broach marked HSS USA 3/16 III missing teeth
Hassay Savage broach marked HSS USA 1/4 III.
Another Hassay Savage broach is present with unclear size marking but measures 7.2mm wide
Dumont broach is marked 3/8 CHS.
All broaches are made from high speed steel.

Sold Price

$408

View Listing
Hassay Savage HSS Broaches 3/4" and 5/8" Sold Trade Me

Sold on: 12 Oct 2025

Hassay Savage HSS Broaches 3/4" and 5/8"

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref U170228

Includes two broaches
Broach 1 marked HSS U S A 3/4 V
Broach 2 marked HSS U S A 5/8 V
High speed steel construction
Made in U S A

Sold Price

$405

View Listing
4x Heavy Duty Workshop Shelving Units Sold Trade Me

Sold on: 12 Oct 2025

4x Heavy Duty Workshop Shelving Units

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref F170083

4x Heavy Duty Workshop Shelving Units.
Each welded angle steel frame is 2445mm long, 635mm wide, 2000mm tall.
Slated wood board shelving.
40x40mm vertical angle steel uprights with 25x25mm angle steel horizontal shelf supports.
Sterl frames are welded construction.
4x frames in auction.
Wood boards can be removed on pickup.
Sturdy workshop units

Sold Price

$395.50

View Listing
Sunderland Model 16 Gear Planer Sold Trade Me

Sold on: 12 Oct 2025

Sunderland Model 16 Gear Planer

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref U154194

Sunderland 16
Max spur gear diameter 812 mm
Max spur gear facewidth 152 mm
Max spur gear pitch Mod 8
Max helix angle for spiral gears 60 degrees
Max double helical gear diameter 762 mm
Maximum double helical gear facewidth 152 mm
Double helical gear pitch Mod 8
Double helical gear helix angle 30 degrees
Standard arbor diameter 50 mm
Maximum length of work on arbor 533 mm
Spindle bore 70 mm
8 cutting speeds from 32.5 to 149 strokes per minute
8 rates of feed from 20 to 50 cuts per tooth
Main drive motor 5.5 kW
Range of tooling and accessories
You will need your own lifting equipment to load this machine

To see this machine running:
https://youtu.be/YG7chQH9KxI

Sold Price

$385

View Listing
30x Reamers, Metric & Imperial Sizes Sold Trade Me

Sold on: 12 Oct 2025

30x Reamers, Metric & Imperial Sizes

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref S170070

30x Reamers, Metric & Imperial Sizes.
Sizes range from 4mm to 26mm.
Taperd shanks and straight shank versions
Tapered Shanks include No.1 a d No.2 sizes.
Condition varies with each reamer.

Sold Price

$380

View Listing
Sandvik CoroThread CNC lathe tools Sold Trade Me

Sold on: 12 Oct 2025

Sandvik CoroThread CNC lathe tools

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref F170187

Three Sandvik CoroThread 266 CNC lathe tools included.
Model numbers visible: C4-266RFC-27050-16 and C4-L166.4FGZ27050-16.
Each tool has an indexable carbide insert installed.

Sold Price

$365.15

View Listing
TOS R5 Turret Lathe Sold Trade Me

Sold on: 12 Oct 2025

TOS R5 Turret Lathe

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref F154179

Model: TOS R5
Centres over bed 230mm
Maximum swing over bed 510mm
Maximum swing over turret slide 440mm
Maximum swing over cross slide 255mm
Maximum distance between spindle nose and turret 950mm
Maximum distance between chuck and turret 200 to 250mm
270mm chuck
Width of bed 415mm
Spindle bore 53mm
Spindle taper Morse 6
Spindle speeds 18 range 28 to 1400 rpm
Longitudinal travel of saddle 660mm
Travel of cross slide 250mm
Tool holder dimensions 147 x 147mm
Size of turret across flats 260mm
Number of holes in turret 6
Diameter of holes in turret 54mm
Turning length 250mm
Electric motor 7.5kW
Some accessories and tooling

Sold Price

$360

View Listing
Assorted HSS End Mills and Milling Cutters Sold Trade Me

Sold on: 12 Oct 2025

Assorted HSS End Mills and Milling Cutters

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref D170133

Lot includes multiple high speed steel end mills and milling cutters.
Brands marked include Sutton Australia and SUS.
Variety of shank diameters and flute styles present.
Various original plastic storage cases included.

Sold Price

$353

View Listing
8x Morse Taper Shank Adapters Sold Trade Me

Sold on: 12 Oct 2025

8x Morse Taper Shank Adapters

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref Y170050

8x Morse Taper Shank Adapters.
Includes:
- 2x No.2 to No.1.
- 2x No.3 to No.1
- 2x No.3 to No.2
- 1x No.4 to No.1
- 1x No.4 to No.3

Condition varies with each unit.

Sold Price

$350

View Listing
Narex Magnetic Chuck Sold Trade Me

Sold on: 12 Oct 2025

Narex Magnetic Chuck

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref M110092

Narex Magnetic Chuck.
200x110x62mm size.
Functions as normal.

Sold Price

$341.09

View Listing
Assorted Morse Taper Drills, Adapters, & Drill Chuck Sold Trade Me

Sold on: 12 Oct 2025

Assorted Morse Taper Drills, Adapters, & Drill Chuck

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref G110086

Assorted Morse Taper Drills, Adapters, & Drill Chuck.
Includes:
- Niraw branded 16mm Keyless chuck with No.2 Tapered Shank and stuck into a No.3 to No.5 adapter.
- 24.5mm drill w/ No.3 Shank.
- 1 25/32" Drill with No.4 shank.
- 1 11/64" Drill with No.3 Shank and a No.3 to No.5 shank adapter.
- 55/64" Drill with No.2 shank and a No.2 to No.4 shank adapter.
- 27/64" Drill with No.1 shank and stuck into two shank adapters a No.2 to No.4 adapter and No4 to No.5 adapter.

Condition varies with each unit.

Sold Price

$338

View Listing
Assorted End Mills and Drill Bits Lot Sold Trade Me

Sold on: 12 Oct 2025

Assorted End Mills and Drill Bits Lot

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref Z170129

Lot includes a variety of end mills and drill bits.
Several end mills with different diameters and cutting profiles.
Drill bits in multiple sizes.
Some tools are stored in protective plastic holders.
Round red holder included with several countersinks.
Various manufacturers and specifications present.
Cutting tools carbide and HSS types.
Total quantity as shown in images.

Sold Price

$334

View Listing
Herbert 2 Head Gang Drill Sold Trade Me

Sold on: 12 Oct 2025

Herbert 2 Head Gang Drill

SKYLARC’S TORDEICH ENGINEERING AUCTION

Skylarc Ref E170238

Manufacturer is Herbert Boring and Drilling Ltd
Each spindle head has an MT3 spindle taper
Table size is 610mm x 390mm
Multiple vices fitted on the table
Spindle speeds 106 - 2850rpm
Auto feeding
News tapping chuck
Three phase
Coolant pump

To see this machine running:
https://youtu.be/NDIuJOt5wJ0

Sold Price

$333.45

View Listing
Show 60 240 All per page