← Back to Auctions

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Auction Ended: Sunday, 7 December 2025

Showing 1–60 of 807 products

Three Phase Turret Milling Machine Sold Trade Me

Sold on: 8 Dec 2025

Three Phase Turret Milling Machine

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref B173615

Model: X6325
Table dimensions: 254mm x 1270mm
Table travel 700mm
Cross travel 405mm
Knee travel 405mm
Spindle travel 127mm
3 feed rates .076mm, .038mm, .203mm
3hp main spindle motor
Sino distal read out
NT40 spindle taper
Spindle speeds 0 - 4200rpm
Power feeds
Manual
Three phase
Manufactured 2004.

To see this machine running:
https://youtu.be/G6HIHTIu9mI

Sold Price

$7,209

View Listing
Ceccato CSA15 Air Compressor w/ OMI ED-15A Air Dryer Sold Trade Me

Sold on: 8 Dec 2025

Ceccato CSA15 Air Compressor w/ OMI ED-15A Air Dryer

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref Y171168

Ceccato CSA15/8 G2 air compressor
Year of manufacture 2010
Weight 220 kg
Working pressure 8 bar.
Max pressure 8 bar.
Made in Italy.
Serial number CA1435828.
Product number 4152007007.
Voltage 400 V 50 Hz 3 phase.
Max inlet temperature 40 C.
Max ambient temperature 40 C.
Control panel ES 3000.
Recent service recorded at 7106 hours on 7/6/24.
Aldo includes OMI ED-15A air refrigerator dryer.
Max working pressure 16 bar.
Air flow 1869 litres per minute.
Refrigerant type R134a (0.38 kg).
Electrical power 0.41 kW.
Power supply 230 V 1 phase 50 Hz.
Max inlet temperature 55 C.
Max ambient temperature 45 C.
Serial number 08T-000481.
Tidy machine in running condition

Sold Price

$4,009

View Listing
Bridford Single Axle Winch Tipping Trailer Sold Trade Me

Sold on: 7 Dec 2025

Bridford Single Axle Winch Tipping Trailer

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref Q170328

On road costs included
No
Best contact time
Business hours

Bridford Single Axle Winch Tipping Trailer.
Model No. 8x4 Winch.
Manufactured in 2017.
Tare 390kg
Gross 1000kg.
Tyre size 165x14.
Enclosed bin approx 2450x1310x810mm.
Rego expired 16/11/2025.
WOF expired 01/2023.

Sold Price

$3,770

View Listing
Haulotte Optimum 8.1 Scissor Lift Sold Trade Me

Sold on: 7 Dec 2025

Haulotte Optimum 8.1 Scissor Lift

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref F171461

Manufacturer Haulotte Group
Model Optimum 8.1
Serial number CE806878
Year of manufacture 2015
Unloaded mass 1572 kg
Nominal power 4.5 kW
Gradeability 25 percent
Rated load inside use 230 kg
Rated load outside use 120 kg
Maximum allowable manual force 400 N inside use and 200 N outside use
Maximum allowable wind speed 12.5 m/s
Maximum allowable chassis inclination 1.5 degrees
Logbook summary card attached
Control panel with emergency stop and operation switches
Powered by electric drive

Sold Price

$3,450

View Listing
Kaeser Airtower 19 Industrial Air Compressor Sold Trade Me

Sold on: 7 Dec 2025

Kaeser Airtower 19 Industrial Air Compressor

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref O170248

Model Airtower 19.
Part number 1.8837.2.
Serial number 1884.
Manufactured by Kaeser Kompressoren GmbH.
Year of production 2005.
Rated power 11 kW.
Rated motor speed 3000 rpm.
Maximum working pressure 10 bar.
Ambient temperature range plus 3 degrees. Celsius to plus 40 degrees Celsius.
Sigma Control panel installed.
Pressure gauge on front panel.
Fitted with Kaeser ZK02 component Sach-Nr 9.1354.1.
Second lower Label indicates internal model TU 26 part number 1.8014.2 serial number 8750.
Refrigerant type R134a.
Charge of refrigerant 0.710 kg.
Max pressure (refrigeration system) 18 bar.
Max pressure (air system) 16 bar.
Rated voltage 230V single phase 50 60Hz.
Rated current 5.0A.
Made in Germany

Sold Price

$3,270

View Listing
Motosaldatrice Engine Driven Welder on Trailer Sold Trade Me

Sold on: 7 Dec 2025

Motosaldatrice Engine Driven Welder on Trailer

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref C173668

Motosaldatrice MPM 12/400 I-KA engine driven welder mounted on Briford tandem axle trailer.
Welder type is MPM 12/400 I-KA.
Rated welding current 480A at 36V 35 percent duty cycle.
350A at 34V 60 percent duty cycle.
300A at 32V 100 percent duty cycle.
Welding voltage 30A to 72V.
Generator output 12 KVA 3 phase 415V or 10 KVA single phase 230V.
Control panel features multiple sockets and meters.
Engine is a Kubota model D1105-E diesel engine.
Runtime hours are 2678.23.
Does run but only if jump started from starter motor
Vendor reports the generator works but the welding doesn't

Trailer manufacturer is Briford Trailers.
Trailer model GRS TANDEM.
Year of manufacture 2000..
Trailer tare weight 300kg.
Trailer gross weight 1500kg.
Tyre size 165x13.
Aluminium checkerplate storage box fitted to trailer drawbar.
Chassis number is 00449975.
Trailer WOF expired 08/2025.
Rego good till 18/08/2026.

Sold Price

$3,002.60

View Listing
Cosen Metal Cutting Band Saw Sold Trade Me

Sold on: 8 Dec 2025

Cosen Metal Cutting Band Saw

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref M171104

Model Cosen C-320NC
Manufactured 09/2000
Automatic bandsaw
Powered vice
3-phase 32A plug
Cuts material up to approximately 400mm wide
Drive motor 5 HP
400V operating voltage
MFG No. 891160
Control panel with digital keypad and pressure control
Cosen Machinery Industrial Co Ltd

Sold Price

$2,610

View Listing
Dura Splitter Log Splitter with Honda GX200 Engine Sold Trade Me

Sold on: 7 Dec 2025

Dura Splitter Log Splitter with Honda GX200 Engine

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref V171607

Dura Splitter log splitter
Powered by Honda GX200 G.5 petrol engine
Engine features manual recoil start
Hydraulic system visible with hoses and fittings attached
Splitter mounted on a metal frame with wheels for mobility
Splitter head features yellow and green metal construction
Splitter has a steel work table integrated into the frame

Starts and runs however likely to require some adjustment of rise need fall.

Sold Price

$2,290

View Listing
Kemppi ProMIG 530 Welder w/ Pro4200 Evolution & ProCool 30 Sold Trade Me

Sold on: 7 Dec 2025

Kemppi ProMIG 530 Welder w/ Pro4200 Evolution & ProCool 30

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref J173103

Kemppi ProMIG 530 welding machine.
Power supply requirement 500V 32A 3-phase plug.
Kemppi Pro4200 Evolution wire feeder attached.
Kemppi ProCool 30 cooler attached.
Control panel model MXE MLS.
Welding processes supported include MIG and MMA.
ProMIG 530 input voltage 50V DC.
Maximum output current 520A at 60 percent duty cycle.
Maximum output current 440A at 100 percent duty cycle.
ProCool 30 rated for U1 400V and 1.25kW.
Pro4200 serial number 1034717M.
ProMIG 530 serial number 1036939M.
Includes torch and cables.
Cable plug is PDL 56PA432 rated at 32A 500V 50Hz IP66.
Wire feeder compartment is shown open
Made in Finland.
These units are operational.

Sold Price

$2,060

View Listing
7.5kVA Generator Leyland Diesel Engine Sold Trade Me

Sold on: 8 Dec 2025

7.5kVA Generator Leyland Diesel Engine

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref T171111

Leyland Diesel Engine.
75kVA, 440VAC, 3-phase.
See photos for power output cable details.
Engine is a Leyland Engine type model UE 600/31, unit type model GU 600/12/5, manufacture year unknown.
Hour clock gauge states 422 run hours.
Includes blue canvas cover tarp.
Formerly standby generator for a local engineering company and was run up and tested regularly
You will need your own lifting machinery to load this machine

Sold Price

$2,000

View Listing
Single Phase Lathe Sold Trade Me

Sold on: 7 Dec 2025

Single Phase Lathe

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref O170326

Model No.TY-1340BH.
Manufactured in 1989
1000mm between centres
36mm spindle bore
300mm swing over bed
500mm swing over gap
Thread cutting
Morse taper No 3 tailstock taper
200mm three jar chucks
200mm four jaw chuck
250mm faceplate
Fixed steady
Traveling steady
Some tooling

Sold Price

$1,990

View Listing
Towable Wood Chipper with Vanguard Engine Sold Trade Me

Sold on: 8 Dec 2025

Towable Wood Chipper with Vanguard Engine

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref A171612

Towable wood chipper on two wheels
Powered by a Briggs and Stratton Vanguard engine
Vanguard 12 engine visible on housing
Manual for Vanguard engine models 290000 300000 350000 380000 included
Viking 2000kg rated tow coupling
Painted green and yellow steel construction
In-feed hopper and discharge chute installed
Belt-driven mechanism visible between engine and chipper
Handwritten note on body states starts on ether carb, needs clean, hinges need freeing seized.
Hinges marked as seized in handwriting on hinge
Engine is air cooled and has a recoil starter and key

Sold Price

$1,810

View Listing
Kemppi Pro MIG 500 Welder & Pro 4000 Welding Units Sold Trade Me

Sold on: 8 Dec 2025

Kemppi Pro MIG 500 Welder & Pro 4000 Welding Units

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref R173605

Kemppi Pro MIG 500 welder unit
Kemppi Pro 4000 welding unit
Three phase unit
32A 4-pin plug attached
Plug rated IP66 32A 500V 50Hz
Origin Finland
Kemppi model PROMIG 500
Kemppi model PRO 4000
Cable and hoses included as shown
PROMIG 500 rated at 500A at 60 percent duty cycle and 390A at 100 percent duty cycle
PROMIG 500 output 0-18 m/min and 0-25 m/min
PRO 4000 rated 400A at 36V 60 percent duty cycle
PRO 4000 rated 310A at 29.5V 100 percent duty cycle
PRO 4000 input 400V three phase 50-60Hz 25A
Units on wheeled trolley as shown

Sold Price

$1,730

View Listing
Pair of 4500kg Capacity Aluninium Ramps by Rapid Ramps Sold Trade Me

Sold on: 7 Dec 2025

Pair of 4500kg Capacity Aluninium Ramps by Rapid Ramps

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref R170329

Pair of 4500kg Capacity Aluninium Ramps by Rapid Ramps.
Both are Model No.150 330.
4500kg max capacity.
Lengths are 3270mm.
Max widths are 550mm.
Max vehicle tyre width capacity 450mm.

Sold Price

$1,370

View Listing
3-Phase Linisher / Sander by Optimum Sold Trade Me

Sold on: 8 Dec 2025

3-Phase Linisher / Sander by Optimum

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref Y171116

3-Phase Linisher / Sander by Optimum.
Model TGM-3
Made in Germany.in 12/2018.
145kg weight.
Brlt dimensions are 100x2000mm.
32A plug attached.
Includes 3x extra sets of belt rollers in varying diameters.
Includes attached material holding vice assembly, see photos.
Includes 10x spare unused sanding belts.
Includes user manual and oladtic toolbox with adjustment tools.
Overall very good condition showing generally mild usage and wear.
Note that locking ring on power plug is detached, see photos.

Sold Price

$1,331

View Listing
Petrol Stump Grinder by Loncin Sold Trade Me

Sold on: 8 Dec 2025

Petrol Stump Grinder by Loncin

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref B170313

Petrol Stump Grinder by Loncin.
Unknown model number.
Powered with a 420cc petrol engine.
350mm diameter tyres.
280mm diameter cutting blade.
Rusty surfaces.

Sold Price

$1,200

View Listing
MasterTig AC/DC Pulse Single Phase 2000 Welder Sold Trade Me

Sold on: 8 Dec 2025

MasterTig AC/DC Pulse Single Phase 2000 Welder

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref H170319

MasterTig AC/DC Pulse 2000 Welder.
Single Phase.
Casing measures approx 520x250x500mm.
Includes attached Cabling.
Note that grounding pin on plug is damaged and partualy missing, will need replacing before powering up, see photos.

Sold Price

$1,150

View Listing
Walker Mowers Model M36-42 Ride On Mower Sold Trade Me

Sold on: 8 Dec 2025

Walker Mowers Model M36-42 Ride On Mower

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref M171884

Walker Mowers ride on mower.
Model number M36-42.
Designed and built by Walker Manufacturing Company Fort Collins Colorado USA.
Equipped with GHS grass handling system.
Forward speed control lever installed.
Throttle and choke control levers installed.
Ignition key included.
Black vinyl seat with molded design.
Yellow steel mowing deck with front caster wheels.
Rear grass collection box in white plastic.
Model plate located near operator seat.
Non runner, parts only

Sold Price

$1,130

View Listing
Akira-Seiki Vertical Machining Center Sold Trade Me

Sold on: 8 Dec 2025

Akira-Seiki Vertical Machining Center

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref C173616

Model: Akira-Seiki A-650 Vertical Machining Center
X-Axis travel 650mm
Y-Axis travel 350mm
Z-Axis travel 400mm
Spindle Nose to Table Surface 200-600mm
Pallet Size 650 x 350mm
Pallet Loading Capacity 120kg
Spindle speeds 12-12000rpm
Spindle Drive 5.5/7.5kW
HSK-63A spindle taper
8 x tool holders
24 tool carousel
Pair of matched vices
Fanuc Series Oi-MC CNC controller
Manufactured 2005
Was running when removed from work approx 6 months ago
You will need your own lifting equipment to load this machine

Sold Price

$1,110

View Listing
Steel Workbench with Irwin Vice Sold Trade Me

Sold on: 7 Dec 2025

Steel Workbench with Irwin Vice

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref I171490

Steel workbench with rectangular top.
Workbench includes a mounted Irwin metalworking vice.
Vice is attached to one end of the workbench.
Workbench frame and under-shelf are metal construction.
Workbench surface shows significant rust.
Single lower storage shelf spans the length of the bench.
Four round steel legs support the structure.
Workbench top features a cutout section near the vice.

Sold Price

$1,010

View Listing
Single Phase Drilling & Milling Machine by Handy-Age Sold Trade Me

Sold on: 7 Dec 2025

Single Phase Drilling & Milling Machine by Handy-Age

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref N171183

Single Phase Drilling & Milling Machine by Handy-Age.
Made in Taiwan.
Motor is dated 1990.
Slotted mounting table is 510x160mm.
Morse Taper No.3 chuck.
Machine is mounted on an included 950mm high all steel stand with inner storage.

Sold Price

$915

View Listing
Vintage 3-Phase Radial Arm Drill by Asouith Sold Trade Me

Sold on: 7 Dec 2025

Vintage 3-Phase Radial Arm Drill by Asouith

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref O171106

Vintage 3-Phase Radial Arm Drill by Asouith.
ID plate missing from drill so age, and model details unknown.
900mm drill arm length.
Adjustable height Drill table 770x510mm.
No.4 Morse tapered drill chuck with a No.4 to No.3 shank adapter attached.
3-Phase 16A plug.

Sold Price

$893

View Listing
20-Foor Shipping Container Worksite Workshop/Smoko Room Sold Trade Me

Sold on: 8 Dec 2025

20-Foor Shipping Container Worksite Workshop/Smoko Room

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref M172066

20-Foor Shipping Container Worksite Workshop/Smoko Room.
The Container has been divided into two interior rooms.
The first room with the original Container doors is set up as a work room with stere topped wall Workbench plus a plywood Workbench at back. Light switch and singe phase plug on back wall. This room measurea approx 3450mm long.
Second room is set up ad a smoko/lunch room with built in table with benches, A cupboard with sink (no tap installed), and two electric heaters. A door had been cut into Container side, door measures approx 600mm wide. A window has been cut our of back wall, its glass is laying on the table.

Container shows moderate rusting, some possible ceiling leaks in workshop room. Container outer bottom framework is severely rusted and may need reinforcing/repair.

Sold Price

$881

View Listing
Alfra Rotabest 40 RQ Magnetic Drill Sold Trade Me

Sold on: 8 Dec 2025

Alfra Rotabest 40 RQ Magnetic Drill

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref U110048

Alfra Rotabest 40 RQ Magnetic Drill.
Single phase motor.
Power input 1200 Watt.
Rotational speed 250 or 450 rpm.
Rota-Quick holder system.
Core drill diameter range 12 to 40 mm.
Maximum cutting depth 50 mm.
Operating voltage 230 Volt.
Frequency 50-60 Hz.
Magnet power input 125 Watt.
Adhesion force 16000 Newton.
Manufacturer Alfred Raith GmbH.
Made in Germany.
Model number and rating information shown on identification label.

Sold Price

$821

View Listing
Steel Workbench with Record 35P Steel Vice Sold Trade Me

Sold on: 8 Dec 2025

Steel Workbench with Record 35P Steel Vice

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref J171465

Steel workbench with rectangular steel top.
Bench surface shows rust across the top and shelf.
Contains a Record Steel 35P bench vice mounted on the top surface.
Bench has four steel legs.
Lower steel shelf divided into three sections.
Vice is manually operated via handle.
Bench is constructed with welded steel frame and flat steel surface.

Sold Price

$805

View Listing
Vintage Remote Control P-51 Mustang Scale Model Sold Trade Me

Sold on: 7 Dec 2025

Vintage Remote Control P-51 Mustang Scale Model

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref E173670

Remote Control P-51 Mustang Scale Model Petrol Flyable Plane.
Lightweight plastic, balsa wood, and foam construction.
2.3-metre length, nearly 3-metre wingspan.
Super Tigre 3000s two cylinder glow engine
860mm diameter propeller.
Retractable landing gear.
See photos for visible electronics
Impressive vintage model ready for new life

Sold Price

$800

View Listing
3M Versaflo M-307 Respirator with Adflo PAPR Unit Sold Trade Me

Sold on: 7 Dec 2025

3M Versaflo M-307 Respirator with Adflo PAPR Unit

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref Z171819

3M Versaflo M-307 respiratory helmet included.
M-307 is part of the M-300 series.
Helmet meets EN 12941, EN 14594, EN 397 LD, and other standards as labeled.
Label date code is 04/2021.
The system includes 3M Adflo powered air purifying respirator unit.
Adflo unit includes battery with indicator display.
Flexible hose connects the Adflo unit to the helmet.
Charger for Li-Ion battery with AU/NZ plug supplied.
Charger input 100-240V AC 50-60Hz and output 12.8V 1.8A as labeled.
Head harness and waist belt included

Sold Price

$770

View Listing
MAXbor MB351L Magnetic Core Drill Sold Trade Me

Sold on: 7 Dec 2025

MAXbor MB351L Magnetic Core Drill

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref T171527

Model MB351L.
230V 50-60Hz 1100W.
No load speed 300 or 450 RPM.
Core cutter capacity 35mm by 35mm (L).
Twist drill bit capacity 13mm by 140mm (L).
Includes MAXbor carry case.
Includes three handles.
Includes spanner and hex key.
Includes coolant bottle with tubing.
Includes user manual.
Power switch and separate magnet on/off controls

Sold Price

$725

View Listing
Assorted Milling and Tapping Tool Holders Collection Sold Trade Me

Sold on: 8 Dec 2025

Assorted Milling and Tapping Tool Holders Collection

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref O171808

Lot includes various milling and tapping tool holders.
One tool holder is marked with WALTER F4042B 063 Z05 for milling applications.
Includes a N02 Reversible Tapping Chuck with 1/8 inch to 1/2 inch capacity.
Tapping chuck is No 2 Morse Taper and manufactured by Piper Tools Australia.
One tool holder is fitted with a standard keyed drill chuck.
A tool holder for threading die is included.
One precision boring head is present with dial adjustment visible..

Sold Price

$706

View Listing
Alfra Rotabest 40 RQ Magnetic Base Drill Sold Trade Me

Sold on: 7 Dec 2025

Alfra Rotabest 40 RQ Magnetic Base Drill

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref Q110044

Alfra Rotabest 40 RQ magnetic base drill
Model number 40 RQ
Serial number 40112846
Rated input power 1200 Watt
Rotational speed 250 or 450 rpm
Rota-Quick tool holder
Core drill diameter range 12 to 40 mm
Maximum cutting depth 50 mm
Rated voltage 230 Volt
Frequency 50-60 Hz
Year of construction 2011
Magnet input power 125 Watt
Magnet adhesion 16000 N
Manufactured by Alfred Raith GmbH
Made in Germany

Sold Price

$705

View Listing
WIA Weldmatic Fabricator Welder w/ Wire Feeder Sold Trade Me

Sold on: 7 Dec 2025

WIA Weldmatic Fabricator Welder w/ Wire Feeder

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref M173600

WIA Weldmatic Fabricator Welder w/ Wire Feeder.
Welder Type No CP33
Wire Feeder Type No W17.
3-phase 32A 4-pin plug.
Includes attached Cabling.
Vendor states this unit is operational.

Sold Price

$705

View Listing
3M Speedglas G5-01 Welding Helmet with Adflo PAPR Unit Sold Trade Me

Sold on: 8 Dec 2025

3M Speedglas G5-01 Welding Helmet with Adflo PAPR Unit

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref A171820

3M Speedglas G5-01 welding helmet is included.
Adflo powered air purifying respirator unit is included.
Flexible hose is attached between helmet and Adflo unit.
Helmet has an adjustable headband.
3M branding is visible on the helmet shell.
Control dial is present on the helmet exterior.
Charging adapter is included.
Adflo unit has indicator lights for power and battery status.
Label inside helmet identifies model as G5-01.
Helmet conforms to 3M EN 175 B, 3M EN 166 B, 3M EN 12941 TH3, and 3M EN 14594 3B certifications.

Sold Price

$695

View Listing
3M Versaflo M-307 Adflo Powered Air Purifying Respirator Sold Trade Me

Sold on: 8 Dec 2025

3M Versaflo M-307 Adflo Powered Air Purifying Respirator

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref Y171818

3M Versaflo M-307 headtop included.
M-307 part of the M-300 series.
3M Adflo powered air purifying respirator unit included.
Unit shows 3M Adflo branding on blower.
Flexible hose connects headtop to Adflo unit.
Battery indicator present on Adflo unit.
Power adapter/charger included.
New Zealand power plug on charger.
Harness and belt system included with Adflo unit.
Protective face shield integrated with headtop.

Sold Price

$660

View Listing
Philips BVP151 LED Floodlight 50W 220-240V Sold Trade Me

Sold on: 7 Dec 2025

Philips BVP151 LED Floodlight 50W 220-240V

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref L171779

Philips BVP151 LED Floodlight
Model: BVP151 LED50/NW
Power rating 50W
Voltage rating 220-240V AC
Frequency 50/60 Hz
Input current 0.22A
LED array 100 x 0.45W LED
Ingress protection rating IP65
Colour temperature 5600 Kelvin
Power factor 0.9
Ambient temperature specification t:25°C
Multiple units included
Cable ends are unterminated
Made in China

Sold Price

$640

View Listing
Mobile Platform Ladder by Ullrich Sold Trade Me

Sold on: 7 Dec 2025

Mobile Platform Ladder by Ullrich

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref P170327

Mobile Platform Ladder by Ullrich.
Model number unknown.
Platform height above floor approx 1970mm.
150kg max load.
Plastic wheels for mobility.
Aluminium construction.

Sold Price

$603

View Listing
Alfra Rotabest Piccolo 32/50 WD Magnetic Drill Sold Trade Me

Sold on: 8 Dec 2025

Alfra Rotabest Piccolo 32/50 WD Magnetic Drill

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref X110051

Model Alfra Rotabest Piccolo 32/50 WD
Made in Germany
Input power 1100 watt
Single phase 230 volt
Frequency 50-60 Hz
Rotational speed 450 rpm
Drill holder 19mm Weldon
Core drill diameter range 12-32 mm
Maximum cutting depth 50 mm
Magnet input power 28 watt
Magnet adhesion 8000 newton
Year of construction 2011
Includes user manual
Includes three detachable handles
Includes orange plastic carry case

Sold Price

$562

View Listing
Trupro Metal Belt Grinder Sander BG1502 Sold Trade Me

Sold on: 8 Dec 2025

Trupro Metal Belt Grinder Sander BG1502

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref E171694

Trupro Metal Belt Grinder Sander.
Model No.BG1502.
Belt size 150x2000mm
Conta t wherl 200x150mm.
3-phase 32A plug.
Includes 4x spare as new Z40 grit belts.
Machine shows surface rusting, see photos.
Has been in storage for some time.

Sold Price

$560

View Listing
Tapmatic 70 TC/DC Reversible Tapping Attachment Sold Trade Me

Sold on: 7 Dec 2025

Tapmatic 70 TC/DC Reversible Tapping Attachment

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref T171787

Tapmatic 70 TC/DC reversible tapping attachment
Capacities M5 to M18 and #10 to 5/8 inch
Maximum RPM 1000
Manufactured by Tapmatic International Corporation
Made in Kriessern, Switzerland
Patented design
Label on unit specifies model and specifications

Sold Price

$555

View Listing
F-16 Radio Control Flyable Scale Model Sold Trade Me

Sold on: 8 Dec 2025

F-16 Radio Control Flyable Scale Model

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref D173669

F-16 Radio Control Flyable Scale Model.
1.9-metres long, 1.3-metres wide.
Lightweight plastic, balsa wood, and foam construction.
Includes installed glow engine, OS Max, unknown CC rating
Ducted fan unit
One external "Fuel tank" is detached.
Front foam nose cone is loosely taped on.
No remote

Sold Price

$553

View Listing
Biesse Akron Edge Bander Sold Trade Me

Sold on: 7 Dec 2025

Biesse Akron Edge Bander

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref A172236

Manufacturer Biesse
Model Artech Akron 435
Year of construction 2010
Serial number 54233
Power supply voltage 415V AC
Rated current 20A
Number of power supply phases 3
Power 8.3kW
Frequency 50Hz
Control panel with touchscreen interface
Equipped with integrated material feeder
Multiple dust extraction ports installed
Made in Italy
Ex joinery shop closure

Sold Price

$545

View Listing
Stainless steel press filter sheets Sold Trade Me

Sold on: 8 Dec 2025

Stainless steel press filter sheets

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref H171879

Stainless steel press filter sheets
Stacked on a pallet
Each sheet has multiple perforations
Material is stainless steel
Sheets are wrapped in plastic film
Suitable for industrial filtration applications

Sold Price

$526.50

View Listing
Mobile Aluminium Scaffold Tower Sold Trade Me

Sold on: 7 Dec 2025

Mobile Aluminium Scaffold Tower

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref C171536

Mobile scaffold tower constructed from aluminium tubing
Platform deck
Four swivel castor wheels with foot brakes
Cross-brace supports for stability
Rectangular work platform surface
Guardrails fitted above platform level

One wheel lock broken

Sold Price

$520

View Listing
ESAB Caddy Tig 2200i AC/DC Welder, Faulty, Parts Only Sold Trade Me

Sold on: 7 Dec 2025

ESAB Caddy Tig 2200i AC/DC Welder, Faulty, Parts Only

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref E173124

ESAB Caddy Tig 2200i AC/DC Welder.
Measures 400x175x345mm
Single phase.
NOTE that this unit is faulty, plug has been cut off for safety. Specific failt reasons are unknown. Parts usage only!

Sold Price

$517

View Listing
Assorted Pallet Racking Components Sold Trade Me

Sold on: 8 Dec 2025

Assorted Pallet Racking Components

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref Q170276

Assorted Pallet Racking Components.
Includes:
- 3x galvanised steel vertical frames each 915x80x2060mm.
- 6x orange horizontal beams each 2740x40x80mm.
- 10x light orange horizontal beams each 2740x50x100mm.
32x shelf support cross bars.
7x 25mm thick MDF Shelving boards

Sold Price

$510

View Listing
8x Modern Office Boardroom Chairs Sold Trade Me

Sold on: 8 Dec 2025

8x Modern Office Boardroom Chairs

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref A171690

8x Modern Office Boardroom Chairs.
Unknown manufacturer.
Manufacturerd in 2016.
Modern design with soft faux black leather seat and backs with chrome metal arm rests and legs.
All are on castors for mobility.
Seat height adjustable from approx 450mm to 550mm.
Seat width between armrests is approx 510mm.
Total Seat width 590mm.
Back height from Seat 470mm.
All show generally light usage marks, mainly on chrome arm rests and leg ends.
See our other auction for another lot of 8 of these office chairs.

Sold Price

$505

View Listing
Power-Mac V9445A Magnetic Drill Sold Trade Me

Sold on: 7 Dec 2025

Power-Mac V9445A Magnetic Drill

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref W110050

Power-Mac V9445A magnetic drill.
Drill capacity for steel is 45mm.
Rated voltage is 230V at 50Hz.
Rated input power is 1200W.
No-load speed is 0 to 350 revolutions per minute.
Magnet attraction force is 12000 Newtons.
Maximum travel is 180mm.
Front speed control dial present.
On and off switch located on side panel.
Fuse holder is accessible on the main control panel.
Handle for feed advancement included.
Base contains two large circular magnets.

Sold Price

$500

View Listing
Assorted Press Brake Tooling Sold Trade Me

Sold on: 7 Dec 2025

Assorted Press Brake Tooling

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref Y173144

Assorted Press Brake Tooling.
Tooling lengths vary from 200mm up to 1825mm.
Unknown what brand/model of press these were originally from.
12x pieces in this auction.

Sold Price

$500

View Listing
25-Ton Capacity Bow Shackle w/ Digital Weight Scale Bolt & Display Unit Sold Trade Me

Sold on: 7 Dec 2025

25-Ton Capacity Bow Shackle w/ Digital Weight Scale Bolt & Display Unit

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref B171665

25-Ton Capacity Bow Shackle.
Shackle measures 290mm long.
Includes PT Ltd branded Digital Weight Scale Bolt assembly.
Includes Rinstrum R320 digital scale display unit. Can be powerd by either 4x AA batteries or AC power adapter cord. Note that the battery compartment shows battery acid damage.. The alternative AC power source cavle is missing, buyer will need to source a replacement AC adapter cord to power scale.

Sold Price

$493

View Listing
Kemppi Minarc 150 AU VRD Welder Sold Trade Me

Sold on: 8 Dec 2025

Kemppi Minarc 150 AU VRD Welder

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref W171530

Kemppi Minarc 150 AU VRD model.
Made in Finland.
Input voltage 240V.
Rated input current 15A.
Single phase 50-60Hz operation.
VRD safe functionality present.
IP23S protection rating.
Output current range 10A to 150A.
Duty cycle 150A at 35 percent.
Duty cycle 100A at 100 percent.
Open circuit voltage 85-90V.
Electrode holder with yellow handle included.
Earth clamp included.
Supplied with attached power cable and 15amp plug.
Serial number 1780873A present on rating plate.
Compliance with IEC 60974-1 and IEC 60974-10.
Carrying strap attached to unit.

Sold Price

$485

View Listing
Assorted Metal Melting / Casting Tools Sold Trade Me

Sold on: 8 Dec 2025

Assorted Metal Melting / Casting Tools

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref V171191

Assorted Metal Melting / Casting Tools.
Includes:
Heavy iron or steel pot approx 165mm diameter, 135mm high, with hardened metal pooled inside.
Fishing weight mold tool No.132189.approx 330mm long.
Heavy Iron Ingot mold with varying sizes of Ingot molds, overall size 235x155x45mm.
Gas burner base.
Ladle for molten metal use.

Sold Price

$455

View Listing
Industrial Hydraulic Tank w/ Single Phase Motor Pump. Sold Trade Me

Sold on: 7 Dec 2025

Industrial Hydraulic Tank w/ Single Phase Motor Pump.

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref I171620

Industrial Hydraulic Tank w/ Single Phase Motor Pump.
CMG branded 2.2kW Single phase pump Motor.
Tank size approx 600x450x400mm.
Includes heavy steel stand.

Sold Price

$450

View Listing
Press Brake V-Block, 2770mm Length Sold Trade Me

Sold on: 8 Dec 2025

Press Brake V-Block, 2770mm Length

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref H165114

Press Brake V-Block, 2770mm Length.
Unknown manufacturer.
See photos for design details.

Sold Price

$431

View Listing
Assorted Structural Steel Sections Sold Trade Me

Sold on: 7 Dec 2025

Assorted Structural Steel Sections

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref J171491

Assorted steel sections included.
Various sizes and profiles visible in images.
Material shows surface rust.
Includes channels and box sections.

Sold Price

$425

View Listing
Show 60 240 All per page