3x Morse Taper Shank Adapters
SKYLARC'S GENERAL PLANT AND MACHINERY AUCTIONSkylarc Ref V170307
3x Morse Taper Shank Adapters.
All are No.5 to No.3 type.
Sold Price
$123.15
Auction Ended: Sunday, 7 December 2025
Showing 241–300 of 807 products
Skylarc Ref V170307
3x Morse Taper Shank Adapters.
All are No.5 to No.3 type.
Sold Price
$123.15
Skylarc Ref S171760
Steel frame workbench with plywood side and back panels
Top surface appears to be a laminated or coated board
Bench includes integrated shelf above worktop
Lower section has shelving and storage compartments
Equipped with a Record No 6 metalworking bench vice
Bench has rectangular storage cubicles under worktop
All structural components are either steel or plywood
Sold Price
$123
Skylarc Ref Z171429
Includes multiple electrical extension leads of various lengths and colors
ALL UNTESTED OR INSPECTED. SOME HAVE PLUGS CUT FROM ENDS AND MAY HAVE BEEN DEEMED UNSAFE OR FAULTY BY THE PREVIOUS OWNER.
Some leads have heavy duty connectors including 3-phase and single-phase plugs
Several leads have damaged or exposed wiring at the ends
Set includes a Lifeguard LG4 power distribution box
Lifeguard LG4 box is yellow plastic with four protected power outlets
Lifeguard LG4 rated 415V 50A
Box serial is 05427-07
Some power leads have portable outlet boxes attached
Contains a mixture of IEC60309 and Australian/New Zealand plug types
Some leads are black rubber insulated
Some leads are orange or white plastic insulated
Lengths of cables are not measured
Some plugs and outlets show signs of wear
Sold Price
$123
Skylarc Ref I171698
6x Bow Shackles.
All are 8.5-ton Capacity.
25mm diameter bow steel.
28mm diameter blue painted pins.
6x Shackles in this auction.
See our other listings for more lots of these Shackles.
Sold Price
$123
Skylarc Ref R171551
Makita 4110C power cutter
255mm blade diameter
240V power input
10A current
2300W power rating
50-60Hz frequency
No load speed 3500rpm
Manufactured by Makita Corporation Japan
Electric corded model
Equipped with protective blade guard
Side and top handles for operation
Sold Price
$122.50
Skylarc Ref L171883
Stainless steel dual chamber construction.
Two cylindrical vessels mounted side by side on a steel frame.
Each chamber equipped with input and output ports.
Manual lever-style clamps for chamber access.
Butterfly valve fitted to output on one chamber.
Electrical hazard warning on the center panel.
Chambers secured with quick release stainless steel latches.
Apparent use for mixing or processing industrial liquids or food products.
Sold Price
$122
Skylarc Ref R171525
Model Metabo WE 14-125 Quick
Power supply 240V 50 or 60 Hz
Power consumption 1450W
Current 6.9A
Maximum speed 10500 rpm
Disc diameter maximum 125mm
Spindle thread M14
Made in Germany
Side handle included
Protective guard included
Label shows manufacturing year 2011
Sold Price
$122
Skylarc Ref D171771
Two horizontal steel pressure tanks included
Tanks have welded end caps
Mounted on steel base supports
Each tank has multiple threaded pipe fittings
Manual valve and pipework attached to one tank
Sold Price
$121
Skylarc Ref D170289
Horn Grooving Toolholder 228.0050.0348 is shown.
Made in Germany.
Horn manufacturer number 2666863.
The body is marked 228.0050.0348.
250mm long, 50mm diameter.
Appears as new unused but missing plastic case.
Also includes 8x extra new inserts Part No. 231.7512.4324 MG 12
Sold Price
$121
Skylarc Ref B171119
6x Stainless Steel Butterfly Valves.
All are 316 grade stainless steel.
2x are 80mm outer thread diameter, 52mm inner bore.
4x are 105mm outer thread diameter, 85mm inner bore.
Two larger valves have had their handles cut off, see photos.
One smaller valve is missing a blue rubber gasket.
Sold Price
$121
Skylarc Ref X172077
Vacmobile Infusion 20/2 Mobile Vacuum System.
Vacuum pump model PVR EM20/B.
Pump capacity 18 m3/h.
Ultimate vacuum 10 mbar.
Supply voltage 230V +/- 10 percent.
Frequency 50 or 60 Hz.
Rated current 3.7 or 4.5A.
Power rating 0.55 or 0.66kW.
Designed and manufactured by VABS Limited, New Zealand.
Year of pump manufacture 2008.
Includes attached vacuum lines as shown.
Any original attachments or accessories are missing.
Instructional CD included.
Mounted on a wheeled base for mobility.
Dirty exterior.
Sold Price
$121
Skylarc Ref C172056
Maxim Steel Storage Cabinet.
Lockable, key is missing.
Adjustable inner shelves.
Some exterior denting, scratches from Workshop office usage. Would benefit from a cleanup.
Sold Price
$121
Skylarc Ref S170304
Iscar Indexable Lathe Grooving Tool GHIR 25C-510.
160mm length.
Includes Torx key and case.
Tool shows some very light marks, may have had breif usage? Case shows workshop storage wear.
Sold Price
$120.69
Skylarc Ref L165456
See photos for specification plates.
Sold Price
$120
Skylarc Ref E171876
Brand: SCA
Model: 12000KG Shop Press
Working load limit: 12000kg
Manual hydraulic operation
Includes two black press plates
Includes two-piece bearing separator
Quality assured
Made in China
Press platform has multiple adjustment holes for height
Red metal frame construction
Bottle jack mechanism included
Spring return system
Warning and operation label present on upper frame
Sold Price
$120
Skylarc Ref J171699
6x Bow Shackles.
All are 8.5-ton Capacity.
25mm diameter bow steel.
28mm diameter blue painted pins.
6x Shackles in this auction.
See our other listings for more lots of these Shackles.
Sold Price
$120
Skylarc Ref I170268
Milling Vice, unknown manufacturer.
155mm wide jaws.
Opens to approx 150mm.
Mounting bolt slots spaced approx 350mm and 190mm apart.
See photos for design details.
Sold Price
$119
Skylarc Ref Q170250
Hytsu 2500kg Pallet Trolley.
60mm minimum height, 160mm max height.
1145mm fork length.
150mm fork width.
225mm gap between forks..
Very dirty surfaces but appears to function normally.
Sold Price
$117
Skylarc Ref H171125
1-Ton Girder Clamp by PWB Anchor.
Beam range 75mm to 220mm.
Includes attached 4.75 ton capacity D-Shackle.
Sold Price
$117
Skylarc Ref W173610
Miller Auto Invision II Robot Power Source.
Pendant controller is missing.
Vendor states unit as operational though no power cord is installed at rear.
Sold Price
$116.80
Skylarc Ref J168054
DeWalt 125mm Corded Angle Grinder.
Model No. DWE4151
Includes side handle and original box.
Disk changing tool is missing.
Tool had been electrical tested but appears never actually used.
Sold Price
$116
Skylarc Ref X173143
5x Packs of Stainless Steel Welding Electrodes.
Manufactured by Golden Bridge.
Manufactured in 2022.
All are 350mm long, 3.2mm diameter.
All cases are labeled 2.5kg weight.
Includes 1x Part No.A002IE308L-16, current 70-130(A).
Includes 2x Part No.A042IE309LMo-16, current 70-130(A).
Includes 1x Part No.A022IE316L-16, current 70-130(A).
Includes 1x case of Part No.JQ-S2209, current 90-120(A).
All are new in sealed plastic cases.
Sold Price
$115
Skylarc Ref Y170284
Tradie Roofers Safety Kit by B-Safe.
Kit No.BK0612q5TRAD
Kit includes:
- Fall arrest harness, Expiry date of 01/2026.
- 15-metre rope safety line, manufactured 01/2016.
- 2x tear Webbing shock absorbers, Expiry dates of 03/2026
- 2x carabiners
- canvas backpack.
Kit appears unused. Backpack exterior shows dirt and wear from storage.
Sold Price
$114
Skylarc Ref N171885
Manufactured by Walker MFG Company.
Serial number D-734336.
Made in Fort Collins, Colorado, USA.
Yellow metal mower deck.
Plastic grass chute attached.
Three wheels mounted for mobility.
Multiple adjustment levers present.
Label includes identifier 5858.
Sold Price
$114
Skylarc Ref U171814
3 jaw gear puller
Maximum reach 200mm
Marking indicates 8 inch size
Metal construction
Central drive screw with hexagonal head
Arms are adjustable and pivoting
Suitable for removing gears or bearings
Sold Price
$113
Skylarc Ref G167531
Lot includes multiple industrial gearboxes
Electric motors are attached to some units
One blue gearbox housing with flange mount is present
One green electric motor and gearbox assembly
One SEW motor and gearbox combination is included
One blue gearbox with planetary gearing visible
One orange cast iron pump housing branded INDENG
One assembly with blue painted rectangular cover and exposed gear wheel
One stainless steel pump with electric motor attached
Sold Price
$112.64
Skylarc Ref Z171507
Kemppi Beta 90X welding helmet
Auto-darkening filter included
Auto-darkening unit model Kemppi V913 DS
Adjustable sensitivity
Adjustable delay
Adjustable shade level 9 to 13
Flip-front lens design
Side adjustment knobs
Black and orange plastic shell
Headband with adjustable ratchet
CE and EN379 markings visible on filter unit
Sold Price
$112.11
Skylarc Ref D171693
100-metre Single Core Electrical Building Wire.
16mm² 1C PAC PVC WH 1kV
Item No.10220199
Manufactured by General Cable.
Assorted new unused 100-metre roll but is very dirty on outer surfaces from long term and partualy outdoor exposed storage.
Sold Price
$112
Skylarc Ref L172091
Atlantic Flux Cored Wire for Mild Steel.
2x Rolls in this auction.
Both are Item No.CHT711
AWS A5.20 E71T-1C
1.2mm each.
15kg weight each.
290mm diameter spools.
Wire Spools are new in vacuum packaging but NOTE that both vacuum bags have holes in them and are no longer vacuum sealed as a result. One included Box shows heavy workshop storage wear. Second roll has no box.
Sold Price
$112
Skylarc Ref U171918
Luandry Wash tub constructed from Copper
Tub has a flared rim and cylindrical sides
Cooper Tub patinated with areas of verdigris
No visible markings or manufacturer’s details
Sold Price
$111
Skylarc Ref F171773
Galvanised steel construction.
Rectangular base with slatted bottom supports.
Vertical side supports connected at top by horizontal bars.
Open front and rear design.
Four ground contact points with flat plate feet.
Sold Price
$110.50
Skylarc Ref Q171602
Ullrich brand aluminium platform ladder
Manufactured in New Zealand
Maximum load rating 120kg
Two steps plus top platform
Cross-braced legs for stability
Warning labels attached on sides
Ribbed steps and platform for grip
Rectangular aluminium frame construction
Rubber capped feet
Meets requirements for tested model
Sold Price
$110
Skylarc Ref O171886
FEEDDEX 61 mixer unit
Twin hopper feed system
Powered by AEI Kapak motor type D112M
Motor rated at 3 horsepower
Motor voltage 400V
Three phase motor
Motor speed 940 RPM
Continuous duty motor
Motor current 5.1 amps
Starter is Nilsen OJ15 direct on line type 3
Starter line voltage 400V and coil voltage 400V
Starter frequency 50 Hz
Starter range 12.6-18 amps
Starter horsepower rated for 10 HP
Fitted with IP66 32A 500V plug (PDL 56PA432)
Steel construction with support frame
Protective grid fitted in both feed hoppers
Electrical control box attached
Sold Price
$109.80
Skylarc Ref N110041
2x SRC-55 Air Rivet Guns.
Some missing components, see photos.
Both are untested.
Sold Price
$109
Skylarc Ref O170274
Richmond 2000kg Pallet Trolley Jack.
1055mm fork length.
155mm fork width.
Gap between forks 220mm.
Fork height from 90mm to 150mm.
Very dirty surfaces but appears to function as it should.
Sold Price
$109
Skylarc Ref R171603
Ullrich brand aluminium platform ladder
Manufactured in New Zealand
Maximum load rating 120kg
Two steps plus top platform
Cross-braced legs for stability
Warning labels attached on sides
Ribbed steps and platform for grip
Rectangular aluminium frame construction
Rubber capped feet
Meets requirements for tested model
Sold Price
$109
Skylarc Ref D171667
Benchtop Arbor Press.
Unknown manufacturer/model.
Base measures 375x150mm.
Frame height 310mm.
Total height with press rod 505mm.
140mm diameter rotating press base wirh four slot widths of 15mm, 20mm, 25mm, and 40mm.
Press rod is 30mm diameter.
Sold Price
$107.50
Skylarc Ref P170249
EasyAccess Co. Industrial Dual Purpise Step Ladder.
1800mm high double Sided step ladder or 4500mm extension ladder.
150kg max weight.
Very dirty surfaces but overall still good condition.
Sold Price
$106
Skylarc Ref I170294
Iscar Indexable Grooving Tool GHIR 20-20-4
200mm length.
As new with Torx key tool and plastic case.
Sold Price
$103.69
Skylarc Ref F110033
Metabo Corded Router.
Model No. Of E 1812.
Single phase.
Sold Price
$103
Skylarc Ref K171804
Three steel panels included
Each panel measures 910mm x 300mm
Panels have louvered slots
Panels include pre-drilled mounting holes on edges
Panels are painted white
Suitable for wall mounting or shelving systems
Sold Price
$103
Skylarc Ref J171855
Marking on tool shows 470-150 400M.
Metal bar holder with squared sides.
One end has a hole and a pin assembly.
Sold Price
$103
Skylarc Ref B171613
FLUX-GERATE GMBH F458 drum pump.
230V 50Hz power supply.
460W power rating.
2.2A current.
IP55 rated enclosure.
Single phase operation S1.
Includes power cord with standard plug.
Comes with stainless steel pump tube.
Hose with fittings attached.
Made in Germany.
Sold Price
$103
Skylarc Ref N171547
Model Bosch GWS 26-180 B
Rated voltage 240V
Rated frequency 50Hz
Power input 2500W
Disc diameter 180mm
No load speed 8500min⁻¹
Thread M14
Current 10A
Includes one fastening flange
Made in Germany
Serial number 391000033
Manufacturer Robert Bosch GmbH D-70745 Leinfelden-Echterdingen
Sold Price
$103
Skylarc Ref C170288
Horn Grooving Toolholder 228.0050.0348 is shown.
Made in Germany.
Horn manufacturer number 2666863.
The body is marked 228.0050.0348.
250mm long, 50mm diameter.
Appears as new unused.
Also includes 10x new inserts Part No.231.7512.4324 MG 12
Sold Price
$102
Skylarc Ref V171633
Assorted Vintage Fastening Hardware, Fittings.
Various steel and brass Fittings, screws, nuts, circlips, etc. See photos for further details on included items.
Sold Price
$102
Skylarc Ref M171546
Bench grinder
Wheel size 150mm
Power 0.5 horsepower
Speed 2800 RPM
Voltage 220V
Current 2.8 amps
Single phase
Frequency 50Hz
On off switch mounted at base
Protective shield fitted on both wheels
Two grinding wheels installed
On off switch very hard to press
Sold Price
$102
Skylarc Ref P171445
Lot includes assorted paint brushes with wooden and plastic handles
Various widths and bristle types included
Some brushes are new and sealed in plastic packaging
Mix of flat, angled, and wide brush heads
Wooden handles are marked '100 percent pure bristle' and 'Made in Indonesia'
Sold Price
$102
Skylarc Ref F173671
Sunlight 150mm Adhesive Backed Sanding Disks.
Includes:
- 6x 100-piece packs of Part No.01312, 240-grit disks.
- 2x 100-piece packs of Part No.01310, 180-grit disks.
All are new unused.
Sold Price
$102
Skylarc Ref A168201
Model Hitachi G 23MR 230mm disc grinder
Rated voltage 230V
Frequency 50Hz
Current 10A
Motor power 2400W
No load speed 6600 revolutions per minute
Disc diameter 230mm
Maximum speed 80 metres per second
Model number C327590H
Side handle attached
Abrasive disc installed
Power cord attached
Power cord insulation is damaged exposing conductor
Made in Malaysia
Sold Price
$101
Skylarc Ref M110040
Record No.36 Pipe Wrench.
Approx 800mm length.
Rusty movable jaw and jaw nut. Jaw nut needs some lubrication as currently will not move by hand.
Sold Price
$101
Skylarc Ref I171802
ER40 collets set in plastic case
Set contains 15 ER40 collets
Tapered tool holder included
Collets and holders are shown in a fitted plastic case
Collets are slotted for compression
Suitable for use with compatible milling or machining equipment
Sold Price
$101
Skylarc Ref D170263
18x Assorted Reamers.
Tapered and straight shank varieties.
Metric and Imperial sizes.
Sizes range from 6mm to 16mm.
Condition varies greatly with each unit.
Sold Price
$101
Skylarc Ref S171916
Lamson storage bin rack.
Steel frame with slotted panel for bin attachment.
Includes 8 yellow Lamson Size 5 plastic bins.
Includes 6 grey
Bins are removable and fit into slots on the frame.
Freestanding metal support base.
Bins are embossed with Lamson Size 5.
Rack designed for benchtop or floor use.
Total of 14 plastic bins included.
Suitable for small parts or hardware storage.
Sold Price
$101
Skylarc Ref X170257
10x Assorted Morse Taper Drill Shank Adapters.
Includes:
- 4x No.5 to No.4
- 1x No.4 to No.3
- 1x No.4 to No.2
- 1x No.3 to No.2
- 2x No.4 to No.4
- 1x No.3 to No.4
Skylarc Ref U170280
Steel Storage Cabinet by Precision.
Lockable, key is missing.
Two inner shelves, most shelf support brackets are missing.
Some panel dents, scratching.
Door latch mechanisim not functioning correctly.
Sold Price
$100
Skylarc Ref L171155
7x Morse Taper Drills w/ 2x Shank Adapters.
Includes:
19mm with No.2 shank.
3/4" with No.2 shank.
35/64" with No 2 shank.
19/32" with No.2 shank
35/64" with No.1 shank.
33/64" with No.1 shank
1/4" with No 1 shank.
No.4 to No 2 shank adapter.
No 3 to No.2 shank adapter.
Condition varies greatly with each drill.
Sold Price
$100
Skylarc Ref I171646
Assorted Grinding Wheels, Disks, Cut-Off Disks, Sanding Pads, More.
Three used bench grinder wherls 125mm to 150mm diameter.
Three used circular saw blades 200mm diameter.
Assorted used bench grinder and angle grinder spare parts.
Remaining items appear to be mostly as new unused grinding wherls, Grinding Disks, Cut-off disks, and sanding disks of various types.
Diameters range from 115mm to 305mm.
Sold Price
$100
Skylarc Ref B171717
Silvan Selecta 100L Smoothflo Spotpak Sprayer w/ Garden Trailer.
Rank interior does not appear to have been filled with fluids, see photos. Exterior is very dirty from partualy outdoor storage.
Part of spray hose is stored within tank. Spray gun is missing.
Pump not tested.
Trailer tyres would benefit from some air and lubrication. Exterior would benefit from a cleanup.
Sold Price
$100
Skylarc Ref Y171454
Lot of assorted extension power cords shown in photos
Various lengths and colours including orange yellow and blue
Multiple cords include attached plugs and sockets
Plastic insulation type visible on all cords
Condition and exact specifications are not provided
Sold Price
$99