← Back to Auctions

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Auction Ended: Sunday, 7 December 2025

Showing 361–420 of 807 products

TG950 Generator Sold Trade Me

Sold on: 8 Dec 2025

TG950 Generator

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref Z171871

Model TG950 generator
AC output 50Hz
Rated output 650VA
Voltage 220V or 240V
Single phase
Fuel type mixed gasoline
Fuel tank capacity 4 litres
Manual pull start
One AC output socket
Engine on off switch
Ratio for mixing fuel indicated as 50 to 1 on tank label
Handle on top for carrying

Sold Price

$77

View Listing
Roll of Galvanized 2.5mm Fencing Wire Sold Trade Me

Sold on: 8 Dec 2025

Roll of Galvanized 2.5mm Fencing Wire

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref S171656

Roll of Galvanized Fencing Wire.
2.5mm diameter.
Length of roll unknown.
Appears to be an unused roll that has been in storage for some time.

Sold Price

$77

View Listing
3x Heavy Steel Support Stands Sold Trade Me

Sold on: 7 Dec 2025

3x Heavy Steel Support Stands

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref G170318

3x Heavy Steel Support Stands.
15mm thick, 610mm diameter steel plate circular bases with 115mm diameter columns.
Each has a 40mm diameter steel centre rod with a threaded bolt on top. The rods pull upwards but have no obvious way of locking in place. Unsure as to what these sturdy and heavy stands are intended for.
See photos for design details.

Sold Price

$76.50

View Listing
25x Assorted Steel Punches Sold Trade Me

Sold on: 8 Dec 2025

25x Assorted Steel Punches

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref U171164

25x Assorted Steel Punches.
Diameters from approx 2mm to 10mm.
Condition varies with each unit.

Sold Price

$76

View Listing
5x Bow Shackles, 8.5-ton Capacity Sold Trade Me

Sold on: 7 Dec 2025

5x Bow Shackles, 8.5-ton Capacity

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref K171700

5x Bow Shackles.
All are 8.5-ton Capacity.
25mm diameter bow steel.
28mm diameter yellow painted pins.
5x Shackles in this auction.
See our other listings for more lots of these Shackles.

Sold Price

$76

View Listing
HOLYTEK Dust Collector SF-4075 Sold Trade Me

Sold on: 8 Dec 2025

HOLYTEK Dust Collector SF-4075

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref B171483

Manufacturer HOLYTEK
Model number SF-4075
Serial number 1232081
Manufacture date 08/2012
Motor power 7.5 HP
Voltage 400 V
Frequency 50 Hz
Phase 3

Sold Price

$76

View Listing
Lathe Tool Holders Set of 3 Sold Trade Me

Sold on: 7 Dec 2025

Lathe Tool Holders Set of 3

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref G171852

Set includes three lathe tool holders.
One holder marked Kennametal M3J31-13D NJC.
All are straight shank type holders.
Each holder is fitted with an indexable carbide insert.
Tool blocks are made of solid metal.
Shows visible wear and surface rust on some tool holders.

Sold Price

$75.80

View Listing
Metabo WE 14-125 Quick Angle Grinder Sold Trade Me

Sold on: 7 Dec 2025

Metabo WE 14-125 Quick Angle Grinder

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref D168204

Metabo WE 14-125 Quick angle grinder
240V power supply
1450W rated power
50/60 Hz rated frequency
6.9A current
Maximum speed 10500 rpm
Disc diameter maximum 125mm
Thread size M14
Included used grinding disc
Made in Germany

Sold Price

$75.03

View Listing
Large Industrial Guillotine Bade Set, 3100mm Length Sold Trade Me

Sold on: 8 Dec 2025

Large Industrial Guillotine Bade Set, 3100mm Length

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref I165115

Large Industrial Guillotine Bade Set.
Unknown manufacturer.
Each blade length is 3100mm long, 72mm wide, 22mm thick.
Mounting g holes approx 20mm diameter and spaced approx 200mm apart on centre.
Age of set unknown.
Some edge chips, qear marks so set appears to have been used.

Sold Price

$75

View Listing
5-Piece Step Drill Bit Set, Imperial Sizes Sold Trade Me

Sold on: 7 Dec 2025

5-Piece Step Drill Bit Set, Imperial Sizes

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref F171149

5-Piece Step Drill Bit Set.
Unknown manufacturer.
Sizes marked on case insert are 1/4-1-3/8 inch, 3/16-7/8 inch, 1/4-3/4 inch, 1/8-1/2 inch, 3/16-1/2 inch.
Bits are stored in a foam insert within a metal carrying case.

Sold Price

$75

View Listing
Telescopic Saw Horse HG807 Sold Trade Me

Sold on: 8 Dec 2025

Telescopic Saw Horse HG807

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref P110043

Model HG807
Extendable telescopic bar to 1.3 metres
Strong steel construction
Load capacity 150 kg
Folds away for storage
Adjustable height
Suitable for use as table trestles
Easy set up
Includes easy adjustable action
Assembly diagram included on packaging

Sold Price

$73

View Listing
4x HP Compaq 8200 Elite SFF Computers w/ Intel Core i7 Sold Trade Me

Sold on: 7 Dec 2025

4x HP Compaq 8200 Elite SFF Computers w/ Intel Core i7

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref A110028

4x HP Compaq 8200 Elite SFF Computers.
Three units use Intel Core i7-2600 at 3.40Ghz.
One unit uses Intel Core i7 860 at 2.80GHz.
Only one unit has a 500Gb HDD storage drive (wiped of old user data and OS), the other three have no Storage drives installed.
RAM installed in computers is 2Gb, 4Gb, 8Gb and 12Gb.
All have optical disk drives.
All include power cords.
Older units, some with noisy fans.

Sold Price

$72.60

View Listing
Locking Pliers and C-Clamp Pliers Assortment Sold Trade Me

Sold on: 8 Dec 2025

Locking Pliers and C-Clamp Pliers Assortment

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref Q171784

Assortment includes five locking pliers and two C-clamp locking pliers
One C-clamp locking plier marked C.H. Hanson 2234012
One locking plier marked Vise-Grip The Original
C-clamp pliers designed for wide flat jaw clamping
Total of seven individual pieces in lot

Sold Price

$72

View Listing
Botek and Sandvik Coromant Gun Drills Lot Sold Trade Me

Sold on: 7 Dec 2025

Botek and Sandvik Coromant Gun Drills Lot

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref M171858

Lot of 8 gun drills.
Includes Botek and Sandvik Coromant brands.
Botek drill marked with diameter 12.013mm length 180mm K15 18/00.
Botek drill marked with diameter 9.538mm length 180mm K15 18/00.
Sandvik Coromant drill marked 6.013 S16 4-90.
Drill marked 428.9-06013-010-201 S16 013-87.
Some drills have plastic blade protectors.
Steel shanks visible on all drills.
Various identifying numbers present on each tool.
All are straight-shank deep drilling type tools.
See photos for specific markings and sizes.

Sold Price

$72

View Listing
800kg Snatch Block Sold Trade Me

Sold on: 8 Dec 2025

800kg Snatch Block

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref I171126

800kg Snatch Block.
310mm total length.
100mm diameter metal pully wheel.25mm wide.

Sold Price

$72

View Listing
70x WHIt / UNC Type Thread  Tapping Bits Sold Trade Me

Sold on: 8 Dec 2025

70x WHIt / UNC Type Thread Tapping Bits

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref I171152

70x WHIt / UNC Type Thread Tapping Bits.
Sizes range up to 7/8".
Condition varies greatly with each unit.

Sold Price

$72

View Listing
2x Heavy Duty Ratchet Tiedown Sets, 5000kg Capacity Sold Trade Me

Sold on: 7 Dec 2025

2x Heavy Duty Ratchet Tiedown Sets, 5000kg Capacity

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref D171719

2x Heavy Duty Ratchet Tiedown Sets.
Unknown manufacturer.
5000kg Capacity.
75mm wide, 9-metres long each set.
Both are as new unused with opened packaging. Some dust from open package storage.

Sold Price

$72

View Listing
Devilbiss Tuffy 2 Paint Spraying Air Compressor Sold Trade Me

Sold on: 7 Dec 2025

Devilbiss Tuffy 2 Paint Spraying Air Compressor

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref Y171922

Wagner Timesaver
Equipped with a WEG Motores S A induction motor
Motor model 2B3048T
Single phase motor
Voltage rating 220 to 240V
Frequency 50 Hz
Rated current 3.3A
Motor speed 1430 rpm
Motor power 1/3 CV
Continuous duty cycle
Black plastic handle on yellow compressor housing
Electrical power cord attached
Two metal mounting feet
Compressor has quick connect fittings on top

Sold Price

$72

View Listing
Kamasa Tools Combination Socket Set Sold Trade Me

Sold on: 8 Dec 2025

Kamasa Tools Combination Socket Set

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref H171177

Kamasa Tools Combination Socket Set.
Metric and Imperial sizes.
Some original pieces are missing from set, see photos.
Set case exterior shows moderate rusting.

Sold Price

$71.50

View Listing
Assorted Press Brake Tooling Sold Trade Me

Sold on: 7 Dec 2025

Assorted Press Brake Tooling

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref G165113

Assorted Vintage Press Brake Bars.
Longest piece 3600mm.
Some are custom welded forms, see photos.

Sold Price

$71

View Listing
All Metal Wheelbarrel Sold Trade Me

Sold on: 7 Dec 2025

All Metal Wheelbarrel

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref D171147

All Metal Wheelbarrel.
Unknown brand/model.
Steel basin approx 950x540mm.
360mm diameter tyre.
Steel frame.
Sturdy unit, tyre pressure good.

Sold Price

$71

View Listing
Hafco 1-Ton Chain Block Sold Trade Me

Sold on: 8 Dec 2025

Hafco 1-Ton Chain Block

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref S173632

Hafco 1-Ton Chain Block.
Model No.HS-S-173M.
Chain size 6x18mm.
Chain grade 80
3-metre chain length.
Not tested under load.

Sold Price

$71

View Listing
WIA Argon Gas Welding Regulator, New Sold Trade Me

Sold on: 8 Dec 2025

WIA Argon Gas Welding Regulator, New

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref M168057

WIA Argon Gas Welding Regulator.
Suitable for argon gas use.
Twin gauge design for accurate pressure and flow readings
Pressure gauge marked up to 400 bar / 6000 psi (BS EN 562 standard)
Flow gauge marked up to 100 litres/minute (EN 562 standard)
20mm gas inlet connection
Robust brass body construction with easy-grip control knob
Clear "open/close" direction on adjustment knob
New and unused condition
Model number not indicated
See our other listings for more of these New regulators.
Photos are indicative.

Sold Price

$70

View Listing
Iscar MWLNR 3232P-08W Lathe Tool Holder Sold Trade Me

Sold on: 8 Dec 2025

Iscar MWLNR 3232P-08W Lathe Tool Holder

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref U171840

Iscar MWLNR 3232P-08W lathe tool holder.
Tool holder body features MWLNR 3232P-08W marking.
Designed for use with indexable inserts.
Tool holder has a square shank.

Sold Price

$70

View Listing
Iscar Indexable Lathe Grooving Tool HELIIR-32C-410 Sold Trade Me

Sold on: 8 Dec 2025

Iscar Indexable Lathe Grooving Tool HELIIR-32C-410

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref T170305

Iscar Indexable Lathe Grooving Tool HELI-GRIP HELIIR-32C-410.
200mm length.
Includes hex key and case.
Tool shows marks from Lathe mounting screws but cutting head shows no obvious usage marks. Case shows workshop storage wear.

Sold Price

$70

View Listing
Metabo W 25-230 Angle Grinder Sold Trade Me

Sold on: 7 Dec 2025

Metabo W 25-230 Angle Grinder

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref H171541

Brand Metabo
Model W 25-230
Power 2500W
Voltage 240V AC
Disc diameter 230mm
No load speed 6600rpm
Auxiliary handle included
Protective guard in place
Side label indicates compliance with CE standards
Orange power cord attached

Sold Price

$70

View Listing
Iscar MTENN 2525M-16W Turning Toolholder Sold Trade Me

Sold on: 8 Dec 2025

Iscar MTENN 2525M-16W Turning Toolholder

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref O171834

Iscar branded toolholder.
Model MTENN 2525M-16W marked on shank.
Toolholder accepts replaceable carbide insert capable of external turning applications.
Shank size is approximately 25mm x 25mm.
Square shank configuration.
Carbide insert fitted to toolholder.
Retaining screw present for insert clamping.
Suitable for use with compatible CNC or manual lathe systems.
Steel construction.
One insert is installed.

Sold Price

$69

View Listing
Assorted Hole Cutter Saws Sold Trade Me

Sold on: 7 Dec 2025

Assorted Hole Cutter Saws

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref C170314

Assorted Hole Cutter Saws.
Diameters up to 110mm.
All appear well used, see photos.

Sold Price

$69

View Listing
7-Metre Lifting Chain Sold Trade Me

Sold on: 7 Dec 2025

7-Metre Lifting Chain

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref P171185

7-Metre Lifting Chain.
No certification tag attached so lifting capacities unknown.
8mm Chain size.
Hooks on each end.

Sold Price

$69

View Listing
Stainless Steel Pail and Mixing Bowls Sold Trade Me

Sold on: 7 Dec 2025

Stainless Steel Pail and Mixing Bowls

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref D171615

One stainless steel pail with spout and handle
Three stainless steel mixing bowls included
Mixing bowl has visible residue on inner surface

Bowls approx 240mm diameter x 140mm
Pail approx 250mm diameter x 300mm deep

Sold Price

$69

View Listing
Makita 9558NB 125mm Angle Grinder Sold Trade Me

Sold on: 7 Dec 2025

Makita 9558NB 125mm Angle Grinder

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref B171821

Makita 9558NB angle grinder
Disc diameter 125mm
Voltage 220-240V
Frequency 50-60Hz
Input power 840W
Current 3.8A
No load speed 11000 rpm
Spindle thread M14
Side handle attached
Made in China
Makita Corporation Anjo Aichi Japan branding
Fitted with New Zealand standard three-pin power plug

Sold Price

$68.50

View Listing
iMax B6AC Dual Power Professional Balance Charger Discharger Sold Trade Me

Sold on: 7 Dec 2025

iMax B6AC Dual Power Professional Balance Charger Discharger

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref Y110052

iMax B6AC Dual Power Professional Balance Charger Discharger
Built-in AC adapter
80W output
Supports LiIon, LiPo, LiFe 1-6 cells
Supports NiCd, NiMH 1-15 cells
Supports Pb 2-20V
Charge rate 0.1-6.0A
Discharge rate 0.1-2.0A
DC input 11-18V
AC input 100-240V 50/60Hz
Temperature sensor port
Microprocessor controlled
Monitoring voltage of individual cell
Balance charging sockets for 2-6 cell batteries
Includes charging leads with various connectors
Includes digital battery capacity checker
Instruction manual included
Original packaging included

Sold Price

$68

View Listing
38x ICE Single Phase Power Cables Sold Trade Me

Sold on: 8 Dec 2025

38x ICE Single Phase Power Cables

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref G173620

38x IEC Single Phase Power Cables.
NZ plug at one end, IEC connection at opposite end.
Lengths vary from 1.5-metres to 3-metres.

Sold Price

$67.66

View Listing
Assorted Lockdown Sets & Components Sold Trade Me

Sold on: 8 Dec 2025

Assorted Lockdown Sets & Components

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref C170262

Assorted Lockdown Sets & Components.
2x 430mm wide and 1x 340mm wide lockdown kit racks, all are incomplete, see photos.
Threaded rod diameters are 12mm and 16mm.
Includes two bins of loose lockdown kit components.

Sold Price

$67.15

View Listing
Ullrich DST/03 0.9m Aluminium Step Ladder Sold Trade Me

Sold on: 7 Dec 2025

Ullrich DST/03 0.9m Aluminium Step Ladder

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref U171528

Brand: Ullrich
Model: DST/03
Nominal height: 0.9 metres
Material: Aluminium
Double sided step ladder design
Anti-slip feet on all legs
Label indicates not suitable for use where electrical hazard exists
Multiple support struts for added stability
Stair tread type steps

Sold Price

$67

View Listing
2x Schrader Bellows Parker Pneumatic Cylinders Sold Trade Me

Sold on: 8 Dec 2025

2x Schrader Bellows Parker Pneumatic Cylinders

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref L165534

2x Schrader Bellows Parker Pneumatic Cylinders.
Housings are both 240x112x112mm.
Shafts are 24mm diameter, 150mm length.
20mm diameter air line connection holes.

Sold Price

$66.50

View Listing
Steel Two Shelf Workshop Trolley on Castors Sold Trade Me

Sold on: 7 Dec 2025

Steel Two Shelf Workshop Trolley on Castors

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref U171762

Steel construction.
Two shelf design.
Raised sides on both shelves.
Fixed tubular steel handle.
Mounted on four castor wheels.
Worn paint finish with visible surface rust.

Sold Price

$66

View Listing
Assorted Hand Tools and Tap Set Sold Trade Me

Sold on: 7 Dec 2025

Assorted Hand Tools and Tap Set

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref C171796

One yellow plastic bin containing assorted hand tools.
Includes various screwdrivers and hex keys.
Various T-handle wrenches present.
Replacement tool inserts and holders included.
Hand tools feature plastic and metal handles.
A red metal case containing a tap set is included.
Tap set includes sizes M10 M8 M6 M5 M4 M3.

Sold Price

$66

View Listing
Assorted Allen Key and Hex Key Sets Sold Trade Me

Sold on: 7 Dec 2025

Assorted Allen Key and Hex Key Sets

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref F171799

Multiple sets of L-shaped hex keys included.
Various sizes across metric and imperial.
Some keys with ball ends.
Sets include brands such as Holex and Tolsen.
Plastic holders and folding handles are present.
Loose individual hex keys included.
Includes T-handle hex keys.
Assorted colours for holders: black, red, green, and blue.

Sold Price

$66

View Listing
Hitachi G 18SEY 180mm Disc Grinder Sold Trade Me

Sold on: 8 Dec 2025

Hitachi G 18SEY 180mm Disc Grinder

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref O171548

Model Hitachi G 18SEY.
180mm disc grinder.
230V 50Hz 10A input.
2400W motor.
No load speed 8500rpm.
Maximum wheel diameter 180mm.
Maximum wheel speed 80m/s.
Manufactured by Hitachi Koki.
Made in Malaysia.
Equipped with wire cup brush attachment.
Includes auxiliary handle.
Power cord attached.

Sold Price

$66

View Listing
EDL Fasteners Metal Thread Screw and Nut Assortment Kit Sold Trade Me

Sold on: 8 Dec 2025

EDL Fasteners Metal Thread Screw and Nut Assortment Kit

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref R171447

EDL Fasteners assortment kit in metal case
Contains multiple sizes of zinc plated metal thread screws and hex full nuts
M4 x 10 metal thread screw pan
M5 x 10 metal thread screw pan
M6 x 12 metal thread screw pan
M8 x 20 metal thread screw pan
M4 x 20 metal thread screw pan
M5 x 20 metal thread screw pan
M6 x 20 metal thread screw pan
M8 x 30 metal thread screw pan
M4 x 30 metal thread screw pan
M5 x 30 metal thread screw pan
M6 x 30 metal thread screw pan
M8 x 40 metal thread screw pan
M4 hex full nuts zinc plated Qty 200
M5 hex full nuts zinc plated Qty 200
M6 hex full nuts zinc plated Qty 200
M8 hex full nuts zinc plated Qty 200
Kit includes divided storage compartments
Includes metal case with latch

Sold Price

$66

View Listing
EDL Fasteners Hex Set Screws Assortment Kit Sold Trade Me

Sold on: 8 Dec 2025

EDL Fasteners Hex Set Screws Assortment Kit

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref S171448

EDL Fasteners hex set screws kit in a gray metal carry case
Contains multiple compartments with various hex set screws
Series includes M6 x 12 CL8.8 zinc plated set screws
M6 x 20 CL8.8 zinc plated set screws
M6 x 30 CL8.8 zinc plated set screws
M6 x 50 CL8.8 zinc plated set screws
M8 x 12 CL8.8 zinc plated set screws
M8 x 20 CL8.8 zinc plated set screws
M8 x 30 CL8.8 zinc plated set screws
M8 x 50 CL8.8 zinc plated set screws
M10 x 16 CL8.8 zinc plated set screws
M10 x 25 CL8.8 zinc plated set screws
M10 x 35 CL8.8 zinc plated set screws
M10 x 50 CL8.8 zinc plated set screws
M12 x 25 CL8.8 zinc plated set screws
M12 x 30 CL8.8 zinc plated set screws
M12 x 40 CL8.8 zinc plated set screws
M12 x 50 CL8.8 zinc plated set screws
Includes hex nuts in plastic bags
Plastic partitions separate contents
Case shows marks and wear

Sold Price

$66

View Listing
Air Tools Right Angle Pneumatic Drill Sold Trade Me

Sold on: 8 Dec 2025

Air Tools Right Angle Pneumatic Drill

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref L172195

Right angle pneumatic drill.
Branding: Air Tools.
Chuck key included.
Rotational speed: 25000 rated RPM.
Rated pressure: 90 PSIG max.
Lever operated trigger.
Air inlet with metal fitting.
Body material: metal.

Sold Price

$66

View Listing
Steel Mesh Stillage Cage Sold Trade Me

Sold on: 7 Dec 2025

Steel Mesh Stillage Cage

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref Q171758

Steel mesh stillage cage.
Rectangular shape with mesh sides and solid steel top rails.
Bottom platform is fitted with a wooden sheet insert.
Base is designed for forklift handling.
Painted in dark red.

Sold Price

$65

View Listing
WIA Argon Gas Welding Regulator, New Sold Trade Me

Sold on: 8 Dec 2025

WIA Argon Gas Welding Regulator, New

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref O168059

WIA Argon Gas Welding Regulator.
Suitable for argon gas use.
Twin gauge design for accurate pressure and flow readings
Pressure gauge marked up to 400 bar / 6000 psi (BS EN 562 standard)
Flow gauge marked up to 100 litres/minute (EN 562 standard)
20mm gas inlet connection
Robust brass body construction with easy-grip control knob
Clear "open/close" direction on adjustment knob
New and unused condition
Model number not indicated
See our other listings for more of these New regulators.
Photos are indicative.

Sold Price

$64.70

View Listing
Telescopic Saw Horse HG807 Sold Trade Me

Sold on: 8 Dec 2025

Telescopic Saw Horse HG807

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref R110045

Model HG807
Extendable telescopic bar to 1.3 metres
Strong steel construction
Load capacity 150 kg
Folds away for storage
Adjustable height
Suitable for use as table trestles
Easy set up
Includes easy adjustable action
Assembly diagram included on packaging

Sold Price

$64

View Listing
Pair of Steel Saftety Barrier Doors Sold Trade Me

Sold on: 8 Dec 2025

Pair of Steel Saftety Barrier Doors

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref Q171160

Pair of Steel Saftety Barrier Doors
Made from 25x25mm angle steel frames with 4mm wire surfaces, 45x45mm square gaps between wire.
Each has hinge posts on one side and floor, ceilling, and side latching bolts, see photos for further design details.
Each door panel is 1250mm wide, 1800mm tall.
Painted in yellow.
Note that the wall mounted portion of the hinges are missing.

Sold Price

$64

View Listing
32 Cast Iron Fleur De Lis Fence Toppers Sold Trade Me

Sold on: 8 Dec 2025

32 Cast Iron Fleur De Lis Fence Toppers

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref O172198

Lot of 32 cast iron fence toppers
Fleur de lis design
Each topper has a square base for mounting
Cast iron construction
Some toppers show surface rust
Approximate length 150mm x 65mm
Suitable for fence or gate decoration
Colour is metallic grey with some rusted areas
Design includes three main lobes and a central spear point
Base section is cylindrical with a square end

Sold Price

$64

View Listing
Assorted Engineers Squares, Pitch Sngke Gauge, Caliper, Stamps Sold Trade Me

Sold on: 8 Dec 2025

Assorted Engineers Squares, Pitch Sngke Gauge, Caliper, Stamps

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref E170264

Auction includes the following items:
Empire Magnetic Polycast Protractor Pitch Angle Gauge.
Groz branded inside spring caliper,230mm length.
Steel Letter punch set with 4mm size letters (case missing lid).
Insize engineers square No.4707-150.
Moore & Wright engineers square No.400-B9939, 180mm length.
P&N engineers square, model number unknown, 170mm length.
Unknown brand/model engineers square 174mm length.

Sold Price

$63.50

View Listing
Labplas Twirl'Em Sterile Sampling Bags Sold Trade Me

Sold on: 8 Dec 2025

Labplas Twirl'Em Sterile Sampling Bags

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref P171913

Labplas Twirl'Em sterile sampling bags
Model SCL21520
2 Boxes containing 250 bags
Bag dimensions are 15 inches by 20 inches
Bag thickness is 2 mil
Large format bags with tear-off protection strip
Expiry date shown as 2023-2
Manufactured by Labplas Inc Canada

Sold Price

$63

View Listing
5.6-Metre Lifting Chain Assembly Sold Trade Me

Sold on: 7 Dec 2025

5.6-Metre Lifting Chain Assembly

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref P171133

5.6-Metre Lifting Chain Assembly.
No certification tag attached.
10mm Chain size.
No weight capacities marked on either hook or link.
End link approx 100x85x15mm.
Hook approx 100x65mm with 14mm wide gap.

Sold Price

$63

View Listing
Cigweld TransMIG 310 Welder, Faulty, Parts only Sold Trade Me

Sold on: 8 Dec 2025

Cigweld TransMIG 310 Welder, Faulty, Parts only

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref P173603

Cigweld TransMIG 310 Welder.
3-phase.
NOTE that this Welder is faulty with unrepairable board and fan according to label from vendor. Power cord cut off for safety. Parts usage or scrap only.

Sold Price

$63

View Listing
Ryobi HBD6MA 205mm 5 Speed Drill Press Sold Trade Me

Sold on: 7 Dec 2025

Ryobi HBD6MA 205mm 5 Speed Drill Press

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref K171544

Ryobi model HBD6MA drill press.
205mm drill press.
5 speed operation.
Chuck capacity 13mm.
Listed speeds: 600rpm, 900rpm, 1250rpm, 1750rpm, 2500rpm.
Motor power 300W.
Single phase.
240V 50Hz.
1.5A motor current.
Motor rated speed 1400rpm.
Manual feed lever with three arms.
Cast iron base and table.
Belt and pulley system enclosed in the head unit.
On/off switch mounted on the front panel.

Sold Price

$62.80

View Listing
Blue Welding Shields Sold Trade Me

Sold on: 7 Dec 2025

Blue Welding Shields

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref H171827

Set of blue welding shields shown unfolded and folded.
Eyelet holes present on the edges for mounting or hanging.
Material appears to be flexible synthetic sheet.
separate shields visible in images.
Each shield is solid blue in colour.

Sold Price

$62.50

View Listing
Assorted Welding Cables, Clamps, Guns, & More Sold Trade Me

Sold on: 8 Dec 2025

Assorted Welding Cables, Clamps, Guns, & More

SKYLARC'S GENERAL PLANT AND MACHINERY AUCTION

Skylarc Ref B172081

Assorted Welding Cables, Clamps, Guns, & More.
Two Nuweld grounding cables/clamps.
Arcade K4000 cable snd clamp.
Kemppi PMT42 water cooled Welding torch.
Kemppi PMT40 water cooled Welding torch.
Unknown brand/model water cooled Welding torch.
See photos for further item condition and type details.

Sold Price

$62.03

View Listing
Show 60 240 All per page