← Back to Auctions

Bloore and Pillar New Plymouth Surplus Machinery Auction

Auction Ended: Sunday, 10 October 2021

Read the Case Study

Showing 1–60 of 368 products

Sertom 40mm Pyramid Plate Rollers Sold Trade Me

Sold on: 10 Oct 2021

Sertom 40mm Pyramid Plate Rollers

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref A129211

Model: Sertom EMO 40-25
Serial number 2176
Manufactured 2006
Roller length 4100mm
Fully hydraulic
Separate controller with digital display
Machine has been stored outside (although covered until recently)
Running when removed but now shows errors
Control panel stored inside
Machine powers up but shows top angle roller error and electric motor faults
Machine weighs 22 tons and you will need your own lifting machinery
Opportunity to own a serious set of rollers at a bargain price

Sold Price

$26,250

View Listing
Haas CNC Rotary Table 4th Axis Sold Trade Me

Sold on: 10 Oct 2021

Haas CNC Rotary Table 4th Axis

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref H125162

Haas CNC fourth axis
Box dimensions 505mm x 270mm x 150mm
200mm three jaw chuck
Tailstock
Mounted on heavy steel plates

Sold Price

$5,550

View Listing
Large Haas CNC Rotary Table 4th Axis Sold Trade Me

Sold on: 10 Oct 2021

Large Haas CNC Rotary Table 4th Axis

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref I125163

Haas CNC Rotary Table
Box dimensions 620mm x 400mm x 200mm
340mm x 340mm plate fitted
320mm round T slot plate underneath
Tailstock
Ex Haas VF3

Sold Price

$4,321

View Listing
Hitachi Seiki CNC Lathe with Bar Feeder Sold Trade Me

Sold on: 10 Oct 2021

Hitachi Seiki CNC Lathe with Bar Feeder

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref P129200

Model: Hitachi Seiki HT Hitec-Turn 20 SII
Turning length 380mm
Distance between centers approx 600mm
Swing over bed 380mm
X-axis travel 200mm
X-axis travel 400mm
10 tool turret
6000rpm spindle speed
210mm three jaw chuck
Siecos LY CNC controller
Chip conveyor
5800mm long bar feeder
Some manuals
Machine powers up but bar feeder is not connected and displays an error.
Has been surplus to retirements for several years
Weighs approx 4000kg, buyer will need thier own lifting equipment.

Sold Price

$3,700

View Listing
Perkins Elmer Optical Emission Spectrometer Sold Trade Me

Sold on: 10 Oct 2021

Perkins Elmer Optical Emission Spectrometer

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref U129205

Model: Perkins Elmer Optima 2100 DV
Part number N0800540
Serial number 080N6120603
Purchased new by the current owner in 2004
Used for waste water testing
Has seen very little use
Includes some accessories

Sold Price

$2,560

View Listing
Single Phase Air Oil Riveting Machine Sold Trade Me

Sold on: 10 Oct 2021

Single Phase Air Oil Riveting Machine

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref K125165

Model: Chang Lian Fa LF-12A
Single phase and pneumatic
1/2hp motor
Foot controller
Machine powers up

Sold Price

$1,667

View Listing
Polyscience Recirculator Sold Trade Me

Sold on: 10 Oct 2021

Polyscience Recirculator

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref H128646

Model: Polyscience Recirculator NO772025
Water recirculating chiller
Single phase
On wheels

Sold Price

$1,661

View Listing
Project Kiwa Vertical Machining Centre Sold Trade Me

Sold on: 10 Oct 2021

Project Kiwa Vertical Machining Centre

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref D128616

Model: Kiwa Excel-1200
CNC milling machine
X-axis travel 1200mm
Y-axis travel 500mm
X-axis travel 550mm
500mm x 1350mm bed
18 tool magazine
Wide range of tooling in the machine
Fanuc Series O-M CNC controller
BT40 spindle
6000rpm main spindle
7kw main spindle motor
Has a fault with the Z axis
Can't get the spindle to power up spindle
Nice small machine for a serious project

You will need your own lifting equipment for this machine, it will probably need to be skated from it's current location.

To see a video of this machine running:
https://youtu.be/EQwmaRp9Tq8

Sold Price

$1,651

View Listing
Large Welding Rotator Sold Trade Me

Sold on: 10 Oct 2021

Large Welding Rotator

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref B129212

Heavy duty welding rotator
Single phase
320mm three jaw chuck
Swivel mechanism
Variable speed controller
Can be continuous or food switch operated
On heavy duty steel frame

Sold Price

$1,510

View Listing
50mm Plate Aluminium Sold Trade Me

Sold on: 10 Oct 2021

50mm Plate Aluminium

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref R129202

50mm thick sheet of plate aluminium
1205mm x 1230mm

Sold Price

$1,400

View Listing
Huge Lot of Punches Sold Trade Me

Sold on: 10 Oct 2021

Huge Lot of Punches

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref Y125153

Approx 130 pieces
Punches and punch dies

Sold Price

$1,175

View Listing
Heavy Duty Welding Rotator Sold Trade Me

Sold on: 10 Oct 2021

Heavy Duty Welding Rotator

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref Z129210

MultiDrive Speed Controller
Tilting mechanism
Adjustable width rollers on top
On heavy steel frame
250mm chuck
Foot controller
Wiring is damaged

Sold Price

$1,160

View Listing
TOS Cylindrical Grinder Sold Trade Me

Sold on: 10 Oct 2021

TOS Cylindrical Grinder

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref C128615

Model: TOS 2 UD Cylindrical Grinder
Grinding wheel diameter 350mm
Center height 145mm
Swing 290mm
Approx 600mm between centers max
Power feeds
150mm 6 jaw chuck
Assortment of grinding wheels
Dial gauge
Needs a tidy but a solid machine

To see a video of this machine running:
https://youtu.be/NQm7b2XR2Cc

Sold Price

$1,120

View Listing
Three Phase Drill Mill Sold Trade Me

Sold on: 10 Oct 2021

Three Phase Drill Mill

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref N128600

Unknown make or model
600mm x 240mm T slot bed
8 speeds
No.3 morse taper spindle
2 HP motor
Pneumatic vice
On heavy duty steel stand
Rorol type three phase plug lol

Sold Price

$1,110

View Listing
Welding Rotator Sold Trade Me

Sold on: 10 Oct 2021

Welding Rotator

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref Y129209

Welding rotator
250mm three jaw chuck
Rotates and tilts
On heavy duty steel frame
Foot controller
Machine doesn't power up

Sold Price

$1,110

View Listing
Three Phase Polisher and Cabinet of Wheels Sold Trade Me

Sold on: 10 Oct 2021

Three Phase Polisher and Cabinet of Wheels

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref D129240

Model: W.Canning and Co. 1512
5hp three phase motor
2920rpm
Extraction housings
4 drawer cabinet with huge range of polishing wheels

Sold Price

$1,070

View Listing
Berghof Speedwave Microwave Digestion System Sold Trade Me

Sold on: 10 Oct 2021

Berghof Speedwave Microwave Digestion System

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref T129204

Model: Berghof Speedwave MWS-3+
Microwave digestion sample preparation
Includes 7 sample cases and 8 sample tubes
Appears to have had very little use

Sold Price

$1,065

View Listing
EMF Spot Welder Sold Trade Me

Sold on: 10 Oct 2021

EMF Spot Welder

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref P128602

Model: EMF Type TAE 32L
5.1KVA max welding output
Water-cooling
Range of electrodes
3 phase 63 amp plug
For controller

Sold Price

$1,011.25

View Listing
Honeywell Circular Chart Recorder Sold Trade Me

Sold on: 10 Oct 2021

Honeywell Circular Chart Recorder

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref S125121

Model: Honeywell Truline DR4500
Projecta 600 watt inverter
Assorted probes
Ply case
Box of chart papers

Sold Price

$903.55

View Listing
Heavy Steel Engineering Workshop Table Top Sold Trade Me

Sold on: 10 Oct 2021

Heavy Steel Engineering Workshop Table Top

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref M126597

Heavy Steel Engineering Workshop Table Top.
40mm thick steel plate with threaded and non threaded holes.
Threaded holes approx 15mm diameter.
Table top only, no support frame included.
Some surface rusting from storage.

Sold Price

$880

View Listing
Sone Single Phase Pipe Threader Sold Trade Me

Sold on: 10 Oct 2021

Sone Single Phase Pipe Threader

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref E129241

Model: Sone Auto-80A
Single phase
750 watt
Forward and reverse
3 die heads
2 disassembled (unknown if complete)
Pipe cutter
Reamer
On stand

Sold Price

$865

View Listing
Hydraulic Pump and Tank Sold Trade Me

Sold on: 10 Oct 2021

Hydraulic Pump and Tank

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref Q128603

Small hydraulic pump with tank
410mm x 205mm x 300mm tank
0.37kw electric motor
Sperry hydraulic pump
No plug

Sold Price

$800

View Listing
Sunnen Hone and Huge Lot of Accessories Sold Trade Me

Sold on: 10 Oct 2021

Sunnen Hone and Huge Lot of Accessories

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref V129258

Model: Sunnen LBA-650D
Single phase
On wooden stand
Includes a huge cabinet of mandrels and stones
Machine powers up but needs a good tidy

Sold Price

$705

View Listing
Pacia Three Phase Drill Press Sold Trade Me

Sold on: 10 Oct 2021

Pacia Three Phase Drill Press

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref V128608

W.J.Weddings Paceia Drill Press
Two speed gearbox
5 speed belt drive
No.2 morse taper spindle
Forward and reverse
260mm x 280mm table
20 amp three phase plug

Sold Price

$502

View Listing
3x Pallets of Assorted Brass & Steel Fittings, Parts, Components Sold Trade Me

Sold on: 10 Oct 2021

3x Pallets of Assorted Brass & Steel Fittings, Parts, Components

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref N126598

3x Pallets of Assorted Brass & Steel Fittings, Parts, Components.
Pallets Includes numerous large and small brass fittings, Valves, and other brass items.
Also includes assorted steel fittings and various components.
See photos for further details on what is included on the three pallets.
Condition varies with each item. Many appear unused leftover workshop stock, dusty from storage. Some steel items show surface rusting from storage.

Sold Price

$500

View Listing
13 x Large Drill Bits Sold Trade Me

Sold on: 10 Oct 2021

13 x Large Drill Bits

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref L125140

Sizes include:
1 3/32"
59/64"
61/64"
1 1/16"
61/64"
63/64"
15/16"
15/16"
13/16"
51/64"
13/16"
23/32"
3/4"

Sold Price

$486

View Listing
Coventry Thread Tapper Kit 12DT Sold Trade Me

Sold on: 10 Oct 2021

Coventry Thread Tapper Kit 12DT

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref R125172

Coventry Thread Tapper Kit.
Made in England.
Set model 12DT.
Includes 170x130x115mm Steel case.
Includes assorted Threading teeth sets.
Threader unit mounting shank approx 25mm diameter, 45mm long.
See photos for further details on type details.

Sold Price

$475

View Listing
Large Lot of Small End Mills Sold Trade Me

Sold on: 10 Oct 2021

Large Lot of Small End Mills

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref Y129261

36 End Mills
Imperial sizes
Smallest size 3/32"
Largest size 7/16"

Sold Price

$471.89

View Listing
44x 250mm Casement & Fanlight Window Stays, Bulk Lot, New Sold Trade Me

Sold on: 10 Oct 2021

44x 250mm Casement & Fanlight Window Stays, Bulk Lot, New

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref E129137

44x 250mm Casement & Fanlight Window Stays, Bulk Lot, New.
Made in NZ.
Cambrian Hardware retail packaging.
Solid brass construction.
Includes the following finishes and types:
- 8x Polished Brass Fanlight Stays.
- 18x Antique Bronze Fanlight Stays.
- 10x Satin Chrome Casement Stays.
- 8x Satin Chrome Fanlight Stays.
All units 250mm length.
Condition - All 44x units are new leftover manufacturer's stock in retail packaging.
See our other listings for more of these units in different lengths and finishes.

Sold Price

$456

View Listing
Collins Electric Pipe Threader Sold Trade Me

Sold on: 10 Oct 2021

Collins Electric Pipe Threader

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref F129242

Model: Collins 151
Single phase
Comes with three Ridgid brand die heads
Two are loose when installed
One slides in but don't contact the driving slot and all will need modification

Sold Price

$455

View Listing
Aftermarket V8 Inlet Manifold Adapters Sold Trade Me

Sold on: 10 Oct 2021

Aftermarket V8 Inlet Manifold Adapters

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref M128625

Three sets
Two the same
410mm long overall, 110mm between the center of each intake hole
39.3mm wide x 50mm tall holes on the engine side
Single set
420mm long
110mm between centers of each intake hole
31mm x 65mm holes on engine side

Sold Price

$445

View Listing
Dearman Chain Clamp Sold Trade Me

Sold on: 10 Oct 2021

Dearman Chain Clamp

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref G128645

Model: Dearman DB500
Total chain length 3100mm
Chain width 46mm
Range of fittings
I'm steel box

Sold Price

$415

View Listing
200mm Dia Rotary Milling Table Sold Trade Me

Sold on: 10 Oct 2021

200mm Dia Rotary Milling Table

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref O125169

Rotary Milling Table.
Unknown manufacturer.
200mm diameter tar surface.
Mouting slots spaced approx 250mm apart on centre.
Age of unit is unknown
Unit shows Workshop wear and usage. Table turns a bit stiff, may need some oiling.

Sold Price

$410.55

View Listing
Lincoln Mig Welder Sold Trade Me

Sold on: 10 Oct 2021

Lincoln Mig Welder

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref U129231

Model: Lincoln Electric Invertec V300-I
Lincoln LN-742 wire feed (no gun)
Regulator
Steel welder trolley on wheels
No plug
Unknown operational condition
Three phase

Sold Price

$406

View Listing
CamX Aftermarket Diff Housing Sold Trade Me

Sold on: 10 Oct 2021

CamX Aftermarket Diff Housing

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref I128621

10 bolt diff housing
250mm between bolt hole centers top to bottom
545mm overall width
140mm diameter at axle ends
New old stock

Sold Price

$405

View Listing
CamX Aftermarket Diff Housing Sold Trade Me

Sold on: 10 Oct 2021

CamX Aftermarket Diff Housing

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref G128619

10 bolt diff housing
250mm between bolt hole centers top to bottom
545mm overall width
140mm diameter at axle ends
New old stock

Sold Price

$401.50

View Listing
Assorted Aftermarket V8 Inlet Manifold Adapters and Parts Sold Trade Me

Sold on: 10 Oct 2021

Assorted Aftermarket V8 Inlet Manifold Adapters and Parts

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref N128626

4 identical inlet manifold adapters
460mm long
110mm between centers of intake holes
32.5mm x 46.2mm intake holes on engine side
One unmatched intake
2 x 430mm long fuel rails
2 x 340mm long fuel rails

Sold Price

$401.50

View Listing
CamX Aftermarket Diff Housing Sold Trade Me

Sold on: 10 Oct 2021

CamX Aftermarket Diff Housing

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref J128622

10 bolt diff housing
250mm between bolt hole centers top to bottom
545mm overall width
140mm diameter at axle ends
New old stock

Sold Price

$401

View Listing
Herbert Three Phase High Speed Drill Press Sold Trade Me

Sold on: 10 Oct 2021

Herbert Three Phase High Speed Drill Press

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref U128607

Herbert high speed drill
2000, 3500, 5600rpm
Adjustable stops
No.1 morse taper spindle
3/8" Jacobs Chuck
Tilting work table
280mm x 310mm
Three phase 20 amp plug

Sold Price

$389

View Listing
Milling Machine Rotary Table Sold Trade Me

Sold on: 10 Oct 2021

Milling Machine Rotary Table

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref B129238

NEWS Japan
190mm diameter rotary table
Fitted with 150mm three jaw chuck

Sold Price

$376.05

View Listing
Okuma Hydraulic Lathe Copy Unit Sold Trade Me

Sold on: 10 Oct 2021

Okuma Hydraulic Lathe Copy Unit

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref Z129236

Okuma hydraulic power pack
Tank dimensions 510mm x 330mm x 390mm
Three phase
Attached to Okuma lathe copy attachment
Old roroll type plug

Sold Price

$375

View Listing
36x 350mm Fanlight Window Stays, Bulk Lot, New Sold Trade Me

Sold on: 10 Oct 2021

36x 350mm Fanlight Window Stays, Bulk Lot, New

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref Z129132

36x 350mm Fanlight Window Stays, Bulk Lot, New.
Made in NZ.
Solid brass construction.
Cambrian Hardware retail packaging..
Satin Chrome finish.
All units 350mm length.
Condition - All 36x units are new leftover manufacturer's stock in retail packaging.
See our other listings for more of these new units in other lengths and finishes.

Sold Price

$365

View Listing
36x 300mm Fanlight Window Stays, Bulk Lot, New Sold Trade Me

Sold on: 10 Oct 2021

36x 300mm Fanlight Window Stays, Bulk Lot, New

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref B129134

36x 300mm Fanlight Window Stays, Bulk Lot, New.
Made in NZ.
Solid brass construction.
Cambrian Hardware retail packaging..
Includes 10x units in Polished Chrome and 26x units in Satin Chrome finish.
All units 300mm length.
Condition - All 36x units are new leftover manufacturer's stock in retail packaging.
See our other listings for more of these units in different lengths and finishes.

Sold Price

$365

View Listing
Shelf of Assorted Stainless Steel Pipe Fittings, Valves, & More Sold Trade Me

Sold on: 10 Oct 2021

Shelf of Assorted Stainless Steel Pipe Fittings, Valves, & More

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref P126600

Shelf of Assorted Stainless Steel Pipe Fittings, Valves, & More
Approx 70x individual stainless steel fittings, many 316 type and some marked as made in Sweden.
Inudes all items on the one shelf seen in photos. Shelf not included.
Condition - Most items appear as new unused but covered with thick dust from workshop storage.

Sold Price

$363

View Listing
355mm Diameter Rotating Mill Table Sold Trade Me

Sold on: 10 Oct 2021

355mm Diameter Rotating Mill Table

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref P125170

Rotating Mill Table.
Unknown manufacturer.
355mm diameter table surface.
Total unit dimensions approx 460x580x140mm.
Condirion - Table surface will not rotate when wheel is turned, unit may need servicing/repair. Some surface rusting from workshop storage.

Sold Price

$360

View Listing
CamX Aftermarket Diff Housing Sold Trade Me

Sold on: 10 Oct 2021

CamX Aftermarket Diff Housing

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref F128618

10 bolt diff housing
250mm between bolt hole centers top to bottom
545mm overall width
140mm diameter at axle ends
New old stock

Sold Price

$360

View Listing
CamX Aftermarket Diff Housing Sold Trade Me

Sold on: 10 Oct 2021

CamX Aftermarket Diff Housing

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref L128624

10 bolt diff housing
250mm between bolt hole centers top to bottom
545mm overall width
140mm diameter at axle ends
New old stock

Sold Price

$360

View Listing
Unimig Mig Welder Sold Trade Me

Sold on: 10 Oct 2021

Unimig Mig Welder

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref X129234

Model: Unimig 3003 IS
Three Phase
Miller Spoolmatic 30A spool gun
Miller MMP pulse GMAW controller
Miller RFCS-14 foot controller
Mig gun
Has been stored in a container with high moisture content and will need inspection before use.

Sold Price

$358.98

View Listing
Tanner Three Phase Drill Press Sold Trade Me

Sold on: 10 Oct 2021

Tanner Three Phase Drill Press

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref O128601

Tanner belt drive pedestal drill press
Three phase
5 speeds
No.2 morse taper spindle
1 hp electric motor
Adjustable height platform
300mm diameter drill table
1/2" Jacobs Chuck
No plug fitted

Sold Price

$356

View Listing
Indexing Head Sold Trade Me

Sold on: 10 Oct 2021

Indexing Head

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref U129101

Dividing Head
Unknown manufacturer and model.
Chuck face approx 160mm diameter
Inner centre hole approx 50mm diameter.
Chuck key not included.
Has been disassembled and unsure if complete
Age of unit unknown.
Some surface rusting from workshop storage.

Sold Price

$351

View Listing
Lincoln Welding Power Supply Sold Trade Me

Sold on: 10 Oct 2021

Lincoln Welding Power Supply

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref V129232

Model: Lincoln Electric Idealarc CV400-I
400 amp welding power source
Miller S-22A wire feed
Various Mig and Tig welding guns
Machine has been stored in a container with high moisture content. Needs thorough inspection before being operated

Sold Price

$351

View Listing
Hitachi Three Phase Metal Cutoff Saw Sold Trade Me

Sold on: 10 Oct 2021

Hitachi Three Phase Metal Cutoff Saw

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref X128610

Model: Hitachi CC 16SB
405mm blade
2290 rpm
On wheeled steel trolley
32amp three phase plug

Sold Price

$350

View Listing
Milling Angle Plate Sold Trade Me

Sold on: 10 Oct 2021

Milling Angle Plate

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref Q125171

Milling Angle Plate.
22mm thick steel.
Item shows typical Workshop wear and usage.

Sold Price

$348

View Listing
Shelf of Assorted Stainless Steel Pipe Fittings Sold Trade Me

Sold on: 10 Oct 2021

Shelf of Assorted Stainless Steel Pipe Fittings

SKYLARC'S TARANAKI ENGINEERING AUCTION

Skylarc Ref O126599

Shelf of Assorted Stainless Steel Pipe Fittings.
Approx 40x individual stainless steel fittings, many 316 type and made in Sweden.
Largest diameter is 170mm.
Inudes all items on the one shelf seen in photos. Shelf not included.
Condition - Most items appear as new unused but covered with thick dust from workshop storage.

Sold Price

$345.50

View Listing
Show 60 240 All per page