Large Stainless Tank
SKYLARC'S TARANAKI ENGINEERING AUCTIONSkylarc Ref P128654
Large Stainless Tank
Internal dimensions 2130mm x 460mm x 760mm
Threaded drain hole in one corner needs a clean
Sold Price
$184
Auction Ended: Sunday, 10 October 2021
Read the Case StudyShowing 121–180 of 368 products
Skylarc Ref P128654
Large Stainless Tank
Internal dimensions 2130mm x 460mm x 760mm
Threaded drain hole in one corner needs a clean
Sold Price
$184
Skylarc Ref F126590
Bulk Lot of Ramset Chemset Anchor Studs.
All packs appear to be type CS16190GH.
190mm stud length.
About 24x packs, most packs appear full, some others are partials.
Leftover Workshop bulk stock. Cardboard packs show moderate dust and some damage from workshop storage.
Sold Price
$182
Skylarc Ref J125138
Lastblock VLBS
Load ring for welding
3 x size 10
1 x size 1.5
Sold Price
$181
Skylarc Ref N125168
Heavy duty cast iron frame
230mm rubber wheel
Three phase
No plug fitted
Sold Price
$181
Skylarc Ref T129256
Sizes from 5 1/2" to 8"
Various tooth counts and thicknesses
1" arbors
Sold Price
$181
Skylarc Ref F129216
Wellculip vertical plate clamp
Model VC-30
Sold Price
$177
Skylarc Ref G129243
Ridgid three head pipe threader
Model 31A
1/2", 3/4",1"
Very unusual tool
Sold Price
$177
Skylarc Ref H129140
18x Fanlight & Casement Window Security Lock Kits.
Cambrian branded packaging.
Made in NZ.
Includes:
- 11x Satin Chrome Fanlight locks.
- 2x Satin Nickel Fanlight locks.
- 5x Antique Bronze Casement locks.
Condition - As new leftover manufacturer's stock. Most sets are complete in retail packaging, two sets are missing a components, four Casement locks are missing packaging and screws.
Sold Price
$175
Skylarc Ref U129153
5x Quality Stylish Door Handles.
Made in NZ by Bloore & Piller.
Brass construction with 3x units with antique bronze finish and 2x units with satin chrome finish.
Lengths are 435mm (2x units), 335mm (2x units), and 285mm (1x unit).
See photos for more style details.
Condition - As new leftover manufacturer's stock. Items unwrapped for photos only.
Sold Price
$172
Skylarc Ref O129225
Imperial sizes
Mainly 3" and 4"
Several sizes
1" arbors
Sold Price
$170
Skylarc Ref T128658
Model Usines Tornos R16
Three phase
With bar feeder
Sold Price
$170
Skylarc Ref L125192
60x Assorted Milling / Lathe Cutting Tools.
Unknown manufacturer and age of units.
All units have a mounting shank of 22mm diameter. Lengths vary from approx 65mm to approx 135mm.
Includes wood board display rack approx 630x235x40mm.
Condition - Surface rusting from workshop storage. Many cutting tips appear unused but cannot verify.
See photos for further type and design details.
Sold Price
$168.50
Skylarc Ref D129162
ER316LSI Stainless Steel MIG Wire, 0.9mm Size.
Kuang Tai branded.
Manufactured in 2013.
Condition - As new unopened box. Box exterior shows long term workshop storage wear.
Sold Price
$168.50
Skylarc Ref S129125
72x Assorted Necked Flush Bolts, Bulk Lot.
Items made in NZ.
Assorted sizes and finishes.
See photos for further details on styles and designs.
All items are as new leftover manufacturer's bulk stock. Some packaging shows dust from storage.
Sold Price
$168
Skylarc Ref O129251
3", 4" and 6" cutters
1" arbors
Several styles
Sold Price
$168
Skylarc Ref P125196
Jacobs Keyed Drill Chucks.
Both units made in USA.
1x Model No. 11N size 10mm Chuck.
1x Model No. 14N size 13mm chuck.
Both Chucks have a 20mm Diameter, 60mm long mounting shank.
Both Chucks missing Chuck Keys.
Sold Price
$167
Skylarc Ref O125195
Adjustable Milling Vice.
Unknown manufacturer.
Brass Jaws each 185mm wide though not mounted evenly, see photos.
Vice opens up to approx 60mm.
Mounting slot spacing approx 260mm apart on centre.
Includes crank handle.
Vice operates smoothly.
Sold Price
$166.80
Skylarc Ref X128428
5x Assorted Vintage G-Clamps.
Sizes include:
- 1x 100mm
- 2x 200mm.
- 1x 250mm
- 1x 300mm
Condition - All show heavy wear and usage. One unit has threaded rod tip, all others are missing tips, see photos.
Sold Price
$166
Skylarc Ref I125137
Titan Girder Clamp
75mm - 230mm clamping range
WLL 2 ton
Sold Price
$164
Skylarc Ref Z129106
Assorted Lathe Tooling Holders.
Assorted varieties and types, see photos.
Most show surface rusting from workshop storage.
Sold Price
$164
Skylarc Ref E125185
3x Assorted Lathe Live & Dead Centres.
Includes :
- 1x Dead centre with Morse Taper No. 4 shank within a approx 38mm diameter sleeve.
- 1x Live Centre with Cone tip marked with RO/CR and has Morse Taper No. 4 shank within a 38mm diameter sleeve
- 1x Live Centre with flat faced head approx 50mm diameter, with mounting shank approx 30mm diameter.
See photos for further design details for each unit
Sold Price
$163.20
Skylarc Ref L129196
9x Packs of Weldwell KV5 2.5mm Low Hydrogen Welding Electrodes.
300mm rod length, 2.5mm diameter.
9x sealed unopened packs in 2x opened boxes, see photos.
Electrodes are as new and sealed in their packs. Boxes show Workshop storage wear.
Sold Price
$163
Skylarc Ref E126589
Pallet of Assorted Nuts, Bolts, Washers & More.
Wide range of Assorted Fastening Hardware in wide variety of sizes.
Condition - Leftover Workshop stock. Some units show surface rusting from workshop storage.
Sold Price
$161
Skylarc Ref Z125180
Machine Thread Tapper Unit.
Unknown manufacturer and model.
Overall unit dimensions (excluding side handle) is approx 100x100x180mm.
Mounting shank approx 30mm diameter.
Centre hole approx 25mm.
See photos for further details on what type of Threading unit this is.
Sold Price
$157
Skylarc Ref A129185
9x Assorted Partial Used Welding Wire Spools.
Includes assorted brands and types including some stainless steel varieties.
Amounts of wire remaining on each spool varies greatly.
Some wire showd rust spotting from long term open workdhop storage. Others include their original boxes.
Sold Price
$157
Skylarc Ref U126579
4x Packs of Weldwell Welding Electrodes.
Includes:
- 2x packs of Deep Penetratiin Electrodes type 31A, 3.2x380mm electrode size.
- 1x pack of General Purpose Electrodes type 48A, 3.2x380mm electrode size.
- 1x Low Hydrogen Electrodes type 77, 4.0x380mm electrode size.
Condition - 31A type packs are as new and factory sealed.. Other two packs have been previously opened and appear near full.
Sold Price
$157
Skylarc Ref L128650
Large stainless tank
Internal dimensions 2130mm x 460mm x 760mm
Drain tap
Needs a clean
Sold Price
$157
Skylarc Ref T128632
Lathe Chuck Jaws
100mm long
45mm wide
16mm groove
25mm between hole centers
13.2mm holes
Sold Price
$156.55
Skylarc Ref K129169
Austmig 316LSI Stainless Steel Arc Welding Wire, 1.2mm Size.
Wire still sealed in manufacturer plastic. Box has been opened. Box shows Workshop storage wear.
Sold Price
$156
Skylarc Ref I129219
Imperial sizes
Mainly 3" and 4"
Several styles
Sold Price
$155.50
Skylarc Ref L126596
Large Milling Angle Plate.
Manufactured in 1960 by Wing Tooling Co.
35mm thick steel construction.
Sold Price
$154
Skylarc Ref H129244
Model: Ridgid No.65-R
1" - 2" capacity
Sold Price
$153
Skylarc Ref R125146
2 x Danks Roller Door Controls
Grifco Roller Door Control
Sold Price
$152
Skylarc Ref Q125197
16x Assorted Milling Drill Holders & Thread Tapers.
Unknown manufacturer on 13x units, 3x Units are Ward branded.
Max diameter of each unit is 50mm.
Mounting shanks on 13x units are 20mm Diameter, 2x Units at 32mm, 1x unit at 40mm diameter.
See photos for further details on dezign/type of drill holders that these units are.
Includes assorted other bits, parts etc, see photos.
Surface rusting from open Workshop storage.
Sold Price
$151
Skylarc Ref U129179
ESAB Shield Bright 316L X-tra Stainless Steel Welding Wire, 1.2mm Size.
Partually used spool. Estimate approx 80% wire remaining.
Sold Price
$151
Skylarc Ref O129199
ESAB Extra Low Carbon Stainless Steel Welding Electrodes.
Type No. OK 63.30.
Each electrode is 4.0x350mm.
2x sealed unopened packs with 78x electrodes each.
Includes opened storage box. Box shows Workshop storage wear.
See the ESAB weblink below for further item details:
https://www.esab.co.uk/gb/en/products/filler-metals/covered-stick-electrodes-smaw/stainless-steel-electrodes/ok-63-30.cfm
Sold Price
$151
Skylarc Ref W129155
53x Assorted Plastic Stackable Parts Bins.
Includes:
- 40x Lamson Size 4 bins, each 230x150x120mm.
- 1x Lamson Fix SSI bin at 165x100x75mm.
- 12x Unknown brand blue bins each approx 275x140x120mm.
Condition varies with each unit.
Sold Price
$150.55
Skylarc Ref X125178
13mm Jacobs Keyed Chuck.
Made in USA.
Morse Taper No. 2 Shank.
Includes attached 30mm diameter sleeve over shank, see photos.
Chuck key is missing.
Sold Price
$150
Skylarc Ref O129173
4x Stylish Quality Door Handle Sets by Bloore & Piller, New.
Made in NZ.
Brass construction.
Includes the following styles and finishes:
- 3x BPP806 SC 300B door pull sets in satin chrome, 300mm length.
- 1x BPP800 150B door pill set in Satin Chrome, 150mm length.
See photos for further style details.
Condition - All are as new leftover manufacturer's stock. Boxes show wear from storage. Some sets opened for photos.
Sold Price
$150
Skylarc Ref L129222
2 x 5"
5 x 6"
1 x 8"
Imperial sizes
Sold Price
$149
Skylarc Ref M129223
Imperial sizes
Mainly 3" and 4"
Several styles
Sold Price
$147
Skylarc Ref J129220
Assorted imperial sizes
Mainly 3" and 4"
Several styles
Sold Price
$146
Skylarc Ref K129221
Imperial sizes
4", 5" and 6"
Sold Price
$145
Skylarc Ref C125131
Model: Reid Rbrace 16
In boxes
Sold Price
$144
Skylarc Ref Y126583
2x Sandvik Coromant Indexable Mill Cutters.
Both units are Type 331.2-12512.
Each is approx 125mm diameter.
Sold Price
$144
Skylarc Ref M129249
4" and 5" cutters
1" arbors
Assorted styles
Sold Price
$140
Skylarc Ref T129178
ESAB Shield Bright 316L X-tra Stainless Steel Welding Wire, 1.2mm Size.
Spool is as new in unopened box.
Sold Price
$140
Skylarc Ref I128647
Lathe Chuck Jaws
90mm long
40mm wide
14mm groove
20mm between hole centers
13.2mm holes
Sold Price
$140
Skylarc Ref Y128403
CP Chicago Pneumatic Rotary Rock Hammer Drill.
Model No. CP9.
Made in UK.
Complete unit is as new, unpackaged by us for photos.
Includes a second bit attachment component that appears to have been removed from another unit. This extra bit attachment component Appears unused but shows marked from storage.
Sold Price
$139
Skylarc Ref B125130
Approx 50 drill bits
Largest size 13/64"
Both metric and imperial sizes
Various conditions
Sold Price
$137
Skylarc Ref B125182
Lathe Thread Tapper Unit.
Unknown manufacturer and model.
Overall unit dimensions (excluding side handle) is approx 88x88x215mm.
Mounting shank approx 37mm diameter.
Centre hole approx 25mm.
See photos for further details on what type of Threading unit this is.
Sold Price
$136
Skylarc Ref Q129253
160mm diameter face cutter
10 inserts
38mm arbor
Sold Price
$134
Skylarc Ref R128656
Internal dimensions 2130mm x 460mm x 760mm
Needs cleaning
Sold Price
$134
Skylarc Ref U128451
3x BT40 Type Tool Holders.
Unable to located a manufacturer or type marking on any unit.
All three units appear to be of the same type, see photos for further details.
Some surface rust spotting on all units.
Sold Price
$131
Skylarc Ref J129142
Modern Stylish Antique Bronze Door Pull Handles by Bloore & Piller, New.
Part No. BPP703
Made in Taranaki region NZ of solid brass.
Antique Bronze finish.
Each handle is 480mm in length.
Includes handles for front and back sides of door.
Includes mounting hardware.
See photos for further style details.
Note - Photos of unwrapped handles are indicative. This specific set comes still factory wrapped.
Condition - Leftover as new discontinued manufacturer's factory stock..
See our other listings for more similar door hardware from this NZ manufacturer.
Sold Price
$130.10
Skylarc Ref X125152
Mostly 4" cutters
Variety of styles and thicknesses
Sold Price
$130
Skylarc Ref D128642
CNC lathe chuck
Overall diameter 165mm
3 mounting bolts on backplate
115mm between hole centers
13.2mm bolt holes
61mm overall diameter collets
19 total
Sold Price
$128
Skylarc Ref J128648
Stainless tank
Drain hole in bottom
450mm x 1210mm x 750mm internal dimensions
Sold Price
$128
Skylarc Ref Q125145
Fort Vale brand
DN 80
316 stainless steel
Some spares
Sold Price
$127
Skylarc Ref M125115
Eutectic TeryDyn Coating Gun
Has a broken handle
Second gun in pieces
In steel box
Note on box says unserviceable
Possible parts only
Sold Price
$126