← Back to Auctions

Skylarc's Christchurch Engineering Auction

Auction Ended: Sunday, 6 September 2020

Showing 1–60 of 373 products

Fronius TransPuls Synergic 2700 Welder with Trolley Sold Trade Me

Sold on: 6 Sep 2020

Fronius TransPuls Synergic 2700 Welder with Trolley

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref Q117892

Model: Fronius TransPuls Synergic 2700 4R/E
MIG Model with push pull gun
270 amp max welding output
Three phase
Multi-process MIG/MAG, TIG DC & rod electrode (MMA) welding
With Trolley

Sold Price

$9,050

View Listing
Kemppi FastMig KM400 MIG Welder Sold Trade Me

Sold on: 6 Sep 2020

Kemppi FastMig KM400 MIG Welder

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref N118565

Kemppi FastMig KM400 MIG Welder
400amp max welding output
Kempi MF33 Wire Feed
Powered by 32A 3-phase plug.
Ambicore Binzel 3 Welding Torch MB 36KD.

Sold Price

$4,010

View Listing
Heavy Duty Steel Plate T-Slotted Workshop Table Sold Trade Me

Sold on: 7 Sep 2020

Heavy Duty Steel Plate T-Slotted Workshop Table

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref C118580

Heavy Duty Steel Plate T-Slotted Workshop Table.
Solid 95mm thick steel plate with 10x t-slot grooves cut into it.
Includes a box of compatible t-slot components with Hex bolts.
Note - This unit does NOT include any support frame, auction is for the top plate only.
Note - Very heavy unit, estimate around 2700kg.

Sold Price

$2,210

View Listing
BOC Smoothcut Plasma 100 Welder and Trolley Sold Trade Me

Sold on: 7 Sep 2020

BOC Smoothcut Plasma 100 Welder and Trolley

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref R117893

BOC Smoothcut Plasma 100 Welder and Trolley.
Input voltage Three phase AC420V ±15%
Frequency 50/60Hz
Maximum rated input current (I1max) 20A
Maximum effective supply current (I1eff) 14A
Rated output current range 20–100A
Output voltage range 20–120V
Duty cycle 60% 100A
Efficiency 85%
Power factor 0.93
Arc initiation Stand off
Maximum cutting thickness (mild steel) 25mm
Air pressure requirement 4-5bar

Sold Price

$1,162

View Listing
Chicago Pneumatic CPX40 Refrigerated Air Dryer Sold Trade Me

Sold on: 7 Sep 2020

Chicago Pneumatic CPX40 Refrigerated Air Dryer

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref W117872

Chicago Pneumatic CPX40 Refrigerated Air Dryer.
Make: Chicago Pneumatic.
Model: CPX40.
Refrigerated Air Dryer.
Specifications:
CFM @ 100 PSIG: 43.
Max Pressure: 232.
Power (V, Ph, Hz): 115/230/60/1 
Refrig type: R-134A.
Noise (dba): 53.
Please see photos for more detailed specifications.
Unit has NOT been tested.

Sold Price

$1,060.10

View Listing
Luxcut Industrial Grade Belt Sander Sold Trade Me

Sold on: 7 Sep 2020

Luxcut Industrial Grade Belt Sander

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref H117883

Luxcut Industrial Grade Belt Sander.
Luxcut branded.
Model No. 752.
Belt size 2000x75mm.
Motor - 3KW, 400V 50Hz.
3-Phase powered.
Condition - Operates normaly. Plastic end guard needs reattaching, see photos. Shows typical engineering Workshop wear and usage.

Sold Price

$1,030

View Listing
Industrial Workshop Bandsaw Sold Trade Me

Sold on: 7 Sep 2020

Industrial Workshop Bandsaw

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref N117863

Industrial Workshop Bandsaw.
Unknown manufacturer.
Model No. MJ346.
30mm thick tiltable Table approx 590x490mm and 945mm above floor.
Table pivot capacity from 0 to 45 degrees.
Blade size 4080mm.
3-Phase powered.
Includes spare unused Starret branded blade type W-PB42 4080 x 27 x 8-12TPI.
Condition - Saw operates normally. Shows Workshop wear and use. Heavy tape residue from tape holding doors closed, see photos.

Sold Price

$997

View Listing
67x Assorted Mill Tool Holder Collets, Assorted Sizes Sold Trade Me

Sold on: 6 Sep 2020

67x Assorted Mill Tool Holder Collets, Assorted Sizes

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref R118153

67x Assorted Mill Tool Holder Collets, Assorted Sizes.
Iscar and Rego Fix brands.
61x units are Assorted sizes of ER32 type Collets and remaining 6x units are ER40 type Collets.
Condition varies greatly with each unit. Some appear excellent condition while others show rust spotting.

Sold Price

$893

View Listing
Workshop L-Shaped Corner Work Table Workbench Sold Trade Me

Sold on: 6 Sep 2020

Workshop L-Shaped Corner Work Table Workbench

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref S118102

Workshop L-Shaped Corner Work Table Workbench.
6mm thick sheet steel top surface.
12mm thick plywood lower shelf.
Heavy duty steel frame.
Top surface width approx 605mm.
Two bolts in top surface for mounting a Vice.
Shows typical workshop wear and usage.

Sold Price

$820

View Listing
3 Jaw Universal Chuck Sold Trade Me

Sold on: 6 Sep 2020

3 Jaw Universal Chuck

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref W118730

3 Jaw Universal Chuck.
Overall Diameter:380mm.
PCD: 240mm.
Internal Diameter:135mm.

Sold Price

$710

View Listing
Tooline BS305 305mm Bandsaw Sold Trade Me

Sold on: 7 Sep 2020

Tooline BS305 305mm Bandsaw

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref Y117874

Tooline BS305 305mm Bandsaw.
Max Workpiece Height: 162 mm
Motor: 750 watt 230V-50hz
Blade Speed: 370, 800 m/min
Throat: 305 mm
Blade Length: 2240mm
Table Size: 480 x 400mm.

Sold Price

$663

View Listing
Industrial Workshop Belt Sander Sold Trade Me

Sold on: 7 Sep 2020

Industrial Workshop Belt Sander

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref T118103

Industrial Workshop Belt Sander.
Unknoen manufacturer and model, possibly custom built.
3-phase 32A power plug.
Includes 3x spare unused Kingspor branded replacement sanding belts type CS 409 Y 40.
Sanding belts are 100mm wide.
Unable to test as no 3-phase 32A outlet available.

Sold Price

$623

View Listing
Assorted Lot of Milling End Mill Bits & More Sold Trade Me

Sold on: 6 Sep 2020

Assorted Lot of Milling End Mill Bits & More

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref L119005

Assorted Lot of Milling End Mill Bits & More.
Assorted types and sizes up to 15mm.
Rough estimate of around 50+ loose units.
Includes assorted other components within the cases, see photos.
Condition varies with each unit, a few are as new in cases, most are loose without cases showing varying levels of usage.

Sold Price

$594

View Listing
Engineering Mill Vice Sold Trade Me

Sold on: 7 Sep 2020

Engineering Mill Vice

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref W118132

Engineering Mill Vice.
Model No. HYA150.
150mm wide Jaws.
Mounting slots are spaced approx 180mm apart on centre in width and approx 580mm apart lengthwise.
Includes Vice crank.

Sold Price

$590

View Listing
Allen Bradley GuardShield 450L-B Industrial Equipment Safety Light Curtain Set Sold Trade Me

Sold on: 6 Sep 2020

Allen Bradley GuardShield 450L-B Industrial Equipment Safety Light Curtain Set

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref B119021

Allen Bradley GuardShield 450L-B Industrial Equipment Safety Light Curtain Set.
Both matching units are Cat No. 450L-B4HN1200YD.
Each is 1200mm in length.
Includes mounting hardware, instalation instructions, original boxes.
Condition - New never installed units.

Sold Price

$520.50

View Listing
Master XL6 Infrared Portable Diesel Heater Sold Trade Me

Sold on: 7 Sep 2020

Master XL6 Infrared Portable Diesel Heater

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref X117873

Master XL6 Infrared Portable Diesel Heater.
Infrared oil heaters deliver heat fast and exactly to the place where it is required without any air movement. They are suitable for dust-free drying walls or paints, defrosting machinery or pipe lines, heating the working areas.
Suitable for: * Garages * Workshops, * Construction sites *  Sheds  *  Warehouses *.
Specifications: 
Power:  17kW.
Output: 58.000 BTU/hour.
Output: 14,600 Kcal/hour.
Fuel Autonomy: 7 hours.
Fuel Consumption: 1.35 kg per hour.
Power supply: 220-240/50 V/Hz.
Rated Current: ,85 Amps.
Tank Capacity: 11 litres.

Sold Price

$511.15

View Listing
80+ Assorted Milling End Mills & Taping Bits Sold Trade Me

Sold on: 7 Sep 2020

80+ Assorted Milling End Mills & Taping Bits

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref K119004

80+ Assorted Milling End Mills & Taping Bits.
Brands include Kennametal, Dormer, Somta, TG, Iscar and more.
Assorted sizes from 2mm to 16mm.
Assorted end mill types.
Includes Assorted tap bits.
Condition - Varies with each unit. Some are new unused while others show varying levels of usage.

Sold Price

$491

View Listing
Lot of Assorted Aluminum Sheets and Floor Pieces Sold Trade Me

Sold on: 6 Sep 2020

Lot of Assorted Aluminum Sheets and Floor Pieces

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref V117897

Lot of Assorted Aluminum Sheets/Plates and Floor Pieces.
31 Individual Pieces.
Includes:
22 x 4mm Honeycomb non slip floor panels ranging from: 2400mm x 640mm to 560mm x 550mm.
5 x Aluminum sheets ranging from: 1200mm x 840mm to 600mm x 590mm.
1 x 4mm Perforated Flooring Panel (2400mm x 840mm)
2 x 10mm Aluminum Slab (2400mm x 615mm, 2300mm x 580mm).
1 x 5mm Aluminum Sheet (3000mm x 1500mm).
Note does NOT include the rack in photos.

Sold Price

$460

View Listing
Pinzbohr Mill Tool Holder type BT 340 27 100 Sold Trade Me

Sold on: 6 Sep 2020

Pinzbohr Mill Tool Holder type BT 340 27 100

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref X118471

Pinzbohr Mill Tool Holder type BT 340 27 100.
Includes Pinzbohr extender type P27 45
Includes Pinzbohr Boring Attachment 27 3606 with bore range of 29-40mm.

Sold Price

$436.73

View Listing
Assorted Lot of Drill Bits Sold Trade Me

Sold on: 6 Sep 2020

Assorted Lot of Drill Bits

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref J119549

Assorted Lot of Drill Bits.
Partial Evacut and Dormer branded steel case sets.
Approx 50+ Assorted loose drill bits in various sizes from 3mm to 12mm.
Condition varies with each unit, some appear unused while others show varying usage.

Sold Price

$420

View Listing
V-Block Milling Set Sold Trade Me

Sold on: 7 Sep 2020

V-Block Milling Set

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref G119000

V-Block Milling Set.
Unknown manufacturer.
Both V-Blocks are approx 92x56x56mm.
Includes 7x other accessories, see photos for details.

Sold Price

$401

View Listing
WIA Weldmatic MIG Welder and Wire Feed Sold Trade Me

Sold on: 7 Sep 2020

WIA Weldmatic MIG Welder and Wire Feed

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref O118566

WIA Weldmatic Fabricator & Wire Feeder Industrial Welding Set.
Manufactured in Australia by WIA Welding Industries Australia.
Three Phase
Weldmatic Fabricator Type No. CP33-02 B.
Wire Feeder type W17.
Powerd by 32A 3-phase plug.

Sold Price

$401

View Listing
18x Assorted Small Milling End Mills by JJ Tools Sold Trade Me

Sold on: 6 Sep 2020

18x Assorted Small Milling End Mills by JJ Tools

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref J119003

18x Assorted Small Milling End Mills by JJ Tools.
Includes the following part numbers:
- 2x 8XR1X16X70L
- 1x 1RX2X6X45L.
- 5x 2.5XR0.2X2.5X10X50L.
- 3x 2XR0.2X2X6X45L.
- 3x 4XR0.5X4X13X55L.
- 4x 0.4RX0.8X2X45L.
Condition - All units are new and sealed in cases.

Sold Price

$385

View Listing
Engineering Mill Vice Sold Trade Me

Sold on: 6 Sep 2020

Engineering Mill Vice

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref V118131

Engineering Mill Vice.
Made in Taiwan by Auto Wells.
155mm jaw width.
Mounting slots are approx 200mm apart on centre to sides and approx 580mm on centre lengthwise.
Note - Vice crank is missing and therefore NOT included.

Sold Price

$366

View Listing
Assorted Lengths of Aluminium Material Sold Trade Me

Sold on: 6 Sep 2020

Assorted Lengths of Aluminium Material

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref D117853

Assorted Lengths of Aluminium Material.
Cylindrical, hollow box, L-Shaped, T-Shaped type lengths.
Lengths vary up to 5000mm.
Some appear to be off cuts.
Leftover unused workshop supply stock. Some dust from storage.

Sold Price

$360

View Listing
6x Assorted 165-200mm G-Clamps Sold Trade Me

Sold on: 6 Sep 2020

6x Assorted 165-200mm G-Clamps

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref P119035

6x Assorted 165-200mm G-Clamps.
Unknown manufacturers.
Two units are stamped DC Ross.
Inner gap spacing varies from approx 165mm up to 200mm.
Condition - All show moderate wear and use. Some have slight bends to threaded shafts.

Sold Price

$356

View Listing
Workshop Work Table w/ Sheet Steel Top Sold Trade Me

Sold on: 6 Sep 2020

Workshop Work Table w/ Sheet Steel Top

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref J117885

Workshop Work Table w/ Sheet Steel Top.
5mm thick sheet steel top surface.
Approx 450mm long mounting accessory Welded to one side, see photos for details on type of mounting accessory.
Condition - lower small shelf needs reattaching and repair. Table shows typical workshop wear and usage.

Sold Price

$356

View Listing
Steel Surfaced Heavy Duty Workshop Work Table Sold Trade Me

Sold on: 6 Sep 2020

Steel Surfaced Heavy Duty Workshop Work Table

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref F117855

Steel Surfaced Heavy Duty Workshop Work Table.
1235x1200mm top surface of 6mm thick sheet steel.
Approx 875mm hight.
Heavy steel frame.

Sold Price

$355

View Listing
2-Leg Lifting Chain Sold Trade Me

Sold on: 6 Sep 2020

2-Leg Lifting Chain

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref R118569

2-Leg Lifting Chain.
500mm long chains.
Single leg capacity 1500kg
Multi leg capacity 2550kg.
Needs recertification.

Sold Price

$345

View Listing
Workshop Tipping Scrap Material Trolley Bin Sold Trade Me

Sold on: 6 Sep 2020

Workshop Tipping Scrap Material Trolley Bin

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref F117881

Workshop Tipping Scrap Material Trolley Bin.
Mounted on Castors.
Steel bin dimensions approx 750mm long, 500mm wide, 490mm high.
Hinged for Tipping out contents.
Overall dimensions are approx 1035mm long, 520mm wide, 850mm high at handle.
Shows typical engineering Workshop wear and usage.

Sold Price

$340

View Listing
Drill Press Vice, 125mm Jaws Sold Trade Me

Sold on: 6 Sep 2020

Drill Press Vice, 125mm Jaws

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref L119031

Drill Press Vice, 125mm Jaws.
Made in Poland.
Model No. PIMa-M125.
Manufacturer unknown.
135mm wide Jaws that open up to approx 105mm.
Includss removable crank handle.
Mounting slots spaced approx 125mm apart width, and 320mm apart lengthwise on centre.
Condition - Moderate surface grime and use marks.

Sold Price

$332

View Listing
BOC Acetylene/Oxygen Cutting/Welding Torch Sold Trade Me

Sold on: 6 Sep 2020

BOC Acetylene/Oxygen Cutting/Welding Torch

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref X118107

BOC Acetylene/Oxygen Cutting/Welding Torch.
Comes with Torch attachment, hoses, valves and a carrying case (different brand) with other small attachments - See photos.

Sold Price

$331.75

View Listing
Iscar Milling Cutter Sold Trade Me

Sold on: 6 Sep 2020

Iscar Milling Cutter

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref V118183

Iscar Milling Cutter.
ID markings are worn so unable to read first two letters of type number ??90 F90A D 50-5-22.

Sold Price

$325

View Listing
Workshop Work Bench Table, 7210mm Length Sold Trade Me

Sold on: 7 Sep 2020

Workshop Work Bench Table, 7210mm Length

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref E117854

Workshop Work Bench Table, 7210mm Length.
600mm width, 910mm hight.
Lower 2400mm long shelf.
17mm thick plywood top surface.
Note - Auction is for long Workbench only, items seen on and around unit are not included.

Sold Price

$306

View Listing
Assorted Sheets of Industrial Metal Shims Sold Trade Me

Sold on: 7 Sep 2020

Assorted Sheets of Industrial Metal Shims

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref D119023

Assorted Sheets of Industrial Metal Shims.
Assorted Thicknesses, most are unmarked. Marked sheets range from 0.025mm up to 0.305mm.
Sheet size is approx 450x150mm.
Conditiion - Some sheets are bent, some have been cut.

Sold Price

$305

View Listing
High Speed Resin Abrasive Wheel Cut Off Machine Sold Trade Me

Sold on: 6 Sep 2020

High Speed Resin Abrasive Wheel Cut Off Machine

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref U117896

High Speed Resin Abrasive Wheel Cut Off Machine.
Wheel Dimensions: 400 x 3 x 25. 4(32).
Voltage: 380V AC.
Periodicity: 50Hz
Revolution: 2242RPM.
Rotational Direction: Left-Hand.
Angle Range of Jaws: 0- +45°.
Power: 2.2Kw.
Motor:
Three phase electrical motor.
2800rpm, 2.2Kw.
50Hz, 4.64A.
Comes with 5 extra disks.

Sold Price

$305

View Listing
Workshop Scrap Material Trolley Bin Sold Trade Me

Sold on: 7 Sep 2020

Workshop Scrap Material Trolley Bin

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref G117882

Workshop Tipping Scrap Material Trolley Bin.
Castors attached to base.
Non Tipping design, contents are dumped by attaching Lifting hooks to rear base eye loop or push handle top hook, see photos.
Bin dimensions approx 700mm long, 605mm wide, 500mm high.
Total unit dimensions approx 870mm long, 615mm wide, 990mm high at handle.
Condition - Unit shows typical engineering Workshop wear and usage. The two swivel type rear Castors are not swiveling and may need maintenance or replacement.

Sold Price

$304

View Listing
25x Assorted Lifting Eye Bolts Sold Trade Me

Sold on: 6 Sep 2020

25x Assorted Lifting Eye Bolts

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref W119042

25x Assorted Lifting Eye Bolts.
Bolt sizes range from M20 up to M36.
Condition varies with each unit.

Sold Price

$300

View Listing
Mobile Workshop Trolley w/ Self Height Adjusting Platform Sold Trade Me

Sold on: 6 Sep 2020

Mobile Workshop Trolley w/ Self Height Adjusting Platform

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref C119048

Mobile Workshop Trolley w/ Self Height Adjusting Platform.
Manufactured by Bishamon, id plate is worn so model number unknown.
Max weight capacity 400kg.
Platform dimensions approx 1010x515mm.
Spring loaded platform cyrently set to 455mm. Appears to be adjustable up to approx 670mm.
Condition - Shows moderate wear and surface grime. Rolls smoothly. Some rusty components.

Sold Price

$294

View Listing
Self Standing Workshop Wall Unit Sold Trade Me

Sold on: 7 Sep 2020

Self Standing Workshop Wall Unit

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref N117889

Self Standing Workshop Wall Unit.
Frame is made from 50x50mm hollow box Steel lengths.
Wall surfaces is 9mm thick MDF boards.
See our other listings for more of these type of units.

Sold Price

$293

View Listing
Analogue Z Axial Preset Gauge (Indicator)–ZOV Type Sold Trade Me

Sold on: 7 Sep 2020

Analogue Z Axial Preset Gauge (Indicator)–ZOV Type

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref E118114

Analogue Z Axial Preset Gauge (Indicator)–ZOV Type.
For setting tool length on machining centers / lathe centers.
2. Setting height : 50±0.005mm
3. Large measuring surface and easy to operate.
4. Low spring force to avoid breakage of small end mill and drill.
5. Easy to be calibrated by a ground parallel or gauge block.
6. ZIP-50A : Better parallelism, sensitivity, and precision for use.

Sold Price

$291

View Listing
Pair of Carver T Slot Clamps Sold Trade Me

Sold on: 7 Sep 2020

Pair of Carver T Slot Clamps

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref O119034

Pair of Carver T Slot Clamps.
Light Duty T400/2.
Carver T-slot clamps are patented (0170153), heavy-duty clamps that are used to securely hold workpieces on many different machines and applications.
See last photo for dimensions.

Sold Price

$280

View Listing
Master B150 CED Direct Oil Fired Portable Heater Sold Trade Me

Sold on: 6 Sep 2020

Master B150 CED Direct Oil Fired Portable Heater

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref E117880

Master B150 CED Direct Oil Fired Portable Heater
Power: 44kw, 150.000 Btu/h, 38.000 Kcal/h.
Air displacement: 900m³/h.
Power: 220-240V 50Hz.
Fuel Consumption: 3,72kg/h.
Tank sise: 42L.
Please note this unit has not been tested or powered on.

Sold Price

$276

View Listing
4 Jaw Independent Chuck Sold Trade Me

Sold on: 6 Sep 2020

4 Jaw Independent Chuck

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref X118731

4 Jaw Independent Chuck.
Overall Diameter:410mm.
PCD: 235mm.
Diameter: 300mm.

Sold Price

$275

View Listing
2x Sets of Double Leg Lifting Chains Sold Trade Me

Sold on: 7 Sep 2020

2x Sets of Double Leg Lifting Chains

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref G119546

2x Sets of Double Leg Lifting Chains.
One unit has approx 450mm long chains with 1500kg single leg capacity and up to 2550kg double leg capacity.
Second unit has approx 300mm long chains with 1600kg single leg capacity and up to 2720kg double leg capacity.
Both units have certification expiry dates of 3/2021.

Sold Price

$274

View Listing
8x Assorted Milling End Mill Bits Sold Trade Me

Sold on: 6 Sep 2020

8x Assorted Milling End Mill Bits

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref N119007

8x Assorted Milling End Mill Bits.
Sizes vary up to 22mm.
Condition varies with each unit.

Sold Price

$270

View Listing
7x Iscar Milling Cutter Bits Sold Trade Me

Sold on: 6 Sep 2020

7x Iscar Milling Cutter Bits

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref I119002

7x Iscar Milling Cutter Bits.
Includes the following:
- 4x EC080B20-4C08R0.8L63 *903.
- 3x EC100B22. 4C10R0. 8L72 *903.
Condition - One unit is marked as used (very light use marks). Other units appear as new.

Sold Price

$265

View Listing
Long Workshop Work Table Workbench Sold Trade Me

Sold on: 6 Sep 2020

Long Workshop Work Table Workbench

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref O117864

Long Workshop Work Table Workbench.
17mm thick plywood top surface.
Lower shelf.
Heavy duty steel support frame.

Sold Price

$260

View Listing
Industrial Workbench with Backboard & Vice Sold Trade Me

Sold on: 6 Sep 2020

Industrial Workbench with Backboard & Vice

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref R117867

Industrial Workbench with Backboard & Vice.
Steel frame with wooden tops.
Top workspace dimensions: H2395mm x W1200mm x H900.
Bottom shelf dimensions: L1980mm x W1180mm x H385mm.
Back board dimensions: L1200MM X W55MM X H1200MM.
Vice: Unknown make, bench mounted vice max opening: 145mm x grip length: 125mm.
Includes a white board mounted to backboard.
Condition - Table has moderate ware as to be expected in workshop environment.

Sold Price

$256

View Listing
Hinged Workshop Wall or Door Unit Sold Trade Me

Sold on: 7 Sep 2020

Hinged Workshop Wall or Door Unit

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref Q118100

Hinged Workshop Wall or Door Unit.
Frame is made from 50x50mm hollow box Steel lengths.
Wall surface is 9mm thick MDF boards.
This unit is NOT self supporting, it will need to be connected to a building wall or other self supporting unit.
See our other listings for more of these type of units.

Sold Price

$256

View Listing
Pagnoni Mill Tool Holder BT40M12X83 w/ Kennametal Attachment Cutter Sold Trade Me

Sold on: 6 Sep 2020

Pagnoni Mill Tool Holder BT40M12X83 w/ Kennametal Attachment Cutter

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref R118465

Pagnoni Mill Tool Holder type BT40M12X83
Includes Kennametal Attachment Cutter type 25A03R035M12SED14.
Condition - Kennametal cutter appears unused but cannot verify. Tool holder shows generally light usage marks.

Sold Price

$255

View Listing
Steel Workshop or Office Storage Cabinet by Europlan Sold Trade Me

Sold on: 6 Sep 2020

Steel Workshop or Office Storage Cabinet by Europlan

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref T118571

Steel Workshop or Office Storage Cabinet by European.
3x inner adjustable shelves.
Lockable, key is included.
Condition - Some sticker residue, finish scratches, denting, rust spotting etc. One shelf is missing support brackets.

Sold Price

$255

View Listing
Show 60 240 All per page