← Back to Auctions

Skylarc's Christchurch Engineering Auction

Auction Ended: Sunday, 6 September 2020

Showing 121–180 of 373 products

6 x Assorted Workshop Part Drawers Sold Trade Me

Sold on: 7 Sep 2020

6 x Assorted Workshop Part Drawers

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref S118492

6 x Assorted Workshop Part Drawers.
3 x Blue 25 Drawer Units (One unit is missing bottom of drawers.
1 x Yellow 23 Drawer Unit.
1 x Green 7 Drawer Unit.
1 x Red 10 Drawer Unit.

Sold Price

$156.55

View Listing
Workshop Workbench Station Sold Trade Me

Sold on: 6 Sep 2020

Workshop Workbench Station

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref S118128

Workshop Workbench Station.
Heavy duty steel frame.
17mm thick plywood work surface approx 1200mm long, 785mm wide, and 810mm above floor.
850mm high backboard with a aluminium shelf 1190x165mm.
2x backside aluminium shelves 270mm and 230mm width.
Total unit height approx 1660mm.
Condition - Unit shows typical workshop wear and usage.

Sold Price

$156

View Listing
Enolt LL1500T LED Luminaire Industrial High Bay Light Sold Trade Me

Sold on: 6 Sep 2020

Enolt LL1500T LED Luminaire Industrial High Bay Light

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref W118496

Enolt LL1500T LED Luminaire Industrial High Bay Light.
Make: Enolt.
Model: LL15TAN5NZ300.
The Enolt LED Twin High Bay light was designed specifically for suspended mount installations the LL1500T is fitted with one of the most efficient and reliable LED's available anywhere in the world.
22,000 Lumens.
210 Watt Input
Luminaire Efficacy 105 Lumens Per Watt.
>93% Driver Efficiency.
Cri >80.
Pf >0.975.
5,000k Colour Temp.

Sold Price

$155

View Listing
Assorted Lot of Pull-out Steel Dowel Pins, Tension Pins, & More Sold Trade Me

Sold on: 7 Sep 2020

Assorted Lot of Pull-out Steel Dowel Pins, Tension Pins, & More

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref R118751

Assorted Lot of Pull-out Steel Dowel Pins, Tension Pins, & More.
Most items are Pull-out and tension type steel pins in wide variety of sizes. Hundreds of units. Aldo includes a case of small copper Washers and a case of small screws. See photos for further details on what is included.
Condition - Leftover unused workshop supply stock. Bags a D cases dirty from workshop storage.

Sold Price

$153.80

View Listing
Mobile Workshop Table Workbench Sold Trade Me

Sold on: 6 Sep 2020

Mobile Workshop Table Workbench

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref U118130

Mobile Workshop Table Workbench.
Heavy duty steel frame on heavy Duty Castors.
Plywood top and lower surfaces.
Top surface has 32x 50mm diameter holes for holding Assorted tooling, parts, etc.
Unit shows moderate wear and grime from engineering Workshop usage.

Sold Price

$152

View Listing
3x Indexable Lathe Turning Tools w/ Spare Indexes Sold Trade Me

Sold on: 7 Sep 2020

3x Indexable Lathe Turning Tools w/ Spare Indexes

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref I118742

3x Indexable Lathe Turning Tools w/ Spare Indexes.
Al three tools have no visible id markings so unknown manufacturer and models.
Each tool is 16x16mm in width and approx 100mm in length.
Includes a total of 9x compatible index units from Kennametal and Seco brands.
Condition - Tools show wear and usage. Indexes are leftover unused stock.

Sold Price

$152

View Listing
Assorted Lot Hand Tools Spanners, Sockets, Magnetic Probes, Stamps Sold Trade Me

Sold on: 7 Sep 2020

Assorted Lot Hand Tools Spanners, Sockets, Magnetic Probes, Stamps

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref G118584

Assorted Lot Hand Tools Spanners, Sockets, Magnetic Probes, Stamps.
Includes:
- 50x Assorted Spanners, both metric and Imperial Sizes.
- Partial 1/2" sockets set, no Wrench included.
- 3x Flexable magnetic probes.
- 10-piece metal stamp set.
Condition varies with each unit, some show rusting, see photos.

Sold Price

$152

View Listing
Vertex Touch Point Sensor VPS-20 Sold Trade Me

Sold on: 6 Sep 2020

Vertex Touch Point Sensor VPS-20

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref A119514

Vertex Touch Point Sensor.
Model No. VPS-20.
Uses 2x UM5 type batteries (not included).
Includes wood case.
Unit shows few minor signs of use. Unable to test as no batteries of required type available.

Sold Price

$151

View Listing
Wirecut Angle Block Sold Trade Me

Sold on: 6 Sep 2020

Wirecut Angle Block

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref E119518

Wirecut Angle Block.

Sold Price

$151

View Listing
Assorted Ballnose Endmills (12 Pieces) Sold Trade Me

Sold on: 6 Sep 2020

Assorted Ballnose Endmills (12 Pieces)

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref O118124

Assorted Ballnose Endmills (12 Pieces).
9 x Ball End Mills Garr Tool 43102 10.0mm Solid Carbide Ball End Mill <43102> 142B 10mm HSAL 10x70x24mm 2FL BALL END MILL.
3 x SGS 44575 47MB S-Carb High Performance End Mill, Uncoated, 10 mm Cutting Diameter, 22 mm Cutting Length, 10 mm Shank Diameter, 72 mm Length.

Sold Price

$151

View Listing
Enolt LL1500T LED Luminaire Industrial High Bay Light Sold Trade Me

Sold on: 6 Sep 2020

Enolt LL1500T LED Luminaire Industrial High Bay Light

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref Y118498

Enolt LL1500T LED Luminaire Industrial High Bay Light.
Make: Enolt.
Model: LL15TAN5NZ300.
The Enolt LED Twin High Bay light was designed specifically for suspended mount installations the LL1500T is fitted with one of the most efficient and reliable LED's available anywhere in the world.
22,000 Lumens.
210 Watt Input
Luminaire Efficacy 105 Lumens Per Watt.
>93% Driver Efficiency.
Cri >80.
Pf >0.975.
5,000k Colour Temp.

Sold Price

$151

View Listing
5x Assorted Workshop Power Extension Cords Leads & 2x Power Boards Sold Trade Me

Sold on: 7 Sep 2020

5x Assorted Workshop Power Extension Cords Leads & 2x Power Boards

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref Q118568

5x Assorted Workshop Power Extension Cords Leads & 2x Power Boards.
Two Plug Boss 6-outlet power boards.
5x power extension cable leads in assorted lengths up to 10 metres.
All units are 10A rated.
Invludes 6x sections of cable lead floor protection strips.
Condition varies with each unit.

Sold Price

$151

View Listing
57x Mill Lockdown Bolts, Assorted Lengths & Sizes Sold Trade Me

Sold on: 6 Sep 2020

57x Mill Lockdown Bolts, Assorted Lengths & Sizes

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref J118587

57x Mill Lockdown Bolts, Assorted Lengths & Sizes.
Lengths vary from approx 45mm up to 310mm.
See photos for details on the special purpose bolt head design on each.

Sold Price

$151

View Listing
Drill Press Vice, 86mm Jaws Sold Trade Me

Sold on: 6 Sep 2020

Drill Press Vice, 86mm Jaws

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref J119029

Drill Press Vice, 86mm Jaws.
Unknown manufacturer.
Jaw width 86mm.
Opens up to approx 90mm.
Can be adjusted to the vertical position.
Mounting slots spaced approx 200mm apart on centre.
Condition - Shows moderate surface grime and wear.

Sold Price

$150

View Listing
AroLube 15M Air Hose Reel Sold Trade Me

Sold on: 6 Sep 2020

AroLube 15M Air Hose Reel

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref X119017

AroLube 15M Air Hose Reel.
Model: ARR7115.
Wall mountable.

Sold Price

$142

View Listing
Drill Press Vice, 100mm Jaws Sold Trade Me

Sold on: 7 Sep 2020

Drill Press Vice, 100mm Jaws

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref K119030

Drill Press Vice, 100mm Jaws.
Unknown manufacturer.
100mm wide Jaws.
Opens up to approx 82mm.
Mounting slots approx 125mm apart on centre.
Condition - Shows moderate surface grime and use.

Sold Price

$141

View Listing
Assortment of Various Endmills (13 Pieces) Sold Trade Me

Sold on: 6 Sep 2020

Assortment of Various Endmills (13 Pieces)

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref M118174

Assortment of Various Endmills (13 Pieces)
1 x D16 d16 AP32 L92 Z3 HA45 CR0.2 6054888.
1 x Seco 55312QR050230 Siron-A 4929185 056 DC=12 Re1=0.5.
2 x D12 d12 AP26 L73 Z3 Ha45 C 5995889.
1 x D12 d12 Ap22 L72 Z3 Ha45 C 6125172
1 x D12 d12 Ap22 L72 Z3 Ha45 C 6091880
3 x D12 d12 Ap22 L72 Z3 Ha45 C 6125170
1 x Seco 553080R050Z3.0 - Siron-A 5187032 090 DC-8 re1=0.5.
1 x GARR VRX 10 x 50 Ballnose G81312001.
1 x Hanita Varmill (MT.) 4777 6x6 S/E.
1 x GARR 820M 4mm <45070> GR7770.

Sold Price

$136

View Listing
Iscar Lathe Turning Tool PDJNR 2525M-11 Sold Trade Me

Sold on: 6 Sep 2020

Iscar Lathe Turning Tool PDJNR 2525M-11

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref Z118135

Iscar Lathe Turning Tool.
Part No. PDJNR 2525M-11
Includes case.
Condition - Tool appears unused. Case exterior shows Workshop Storage wear and grime.

Sold Price

$134.11

View Listing
130x130mm Lathe Tool Post Sold Trade Me

Sold on: 7 Sep 2020

130x130mm Lathe Tool Post

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref E118556

130x130mm Lathe Tool Post.
Unknown manufacturer.

Sold Price

$134.03

View Listing
Kennametal Lathe Tool Holder A2TZN 2523J32 Sold Trade Me

Sold on: 7 Sep 2020

Kennametal Lathe Tool Holder A2TZN 2523J32

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref I118144

Kennametal Lathe Tool Holder.
Holder part No. A2TZN 2523J32.
Includes attached Kennametal branded tool.

Sold Price

$133.73

View Listing
Mill Tool Holder BT40 ODP 16X66 E w/ Attachment Sold Trade Me

Sold on: 6 Sep 2020

Mill Tool Holder BT40 ODP 16X66 E w/ Attachment

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref C118476

Mill Tool Holder type BT40 ODP 16X66 E, unknown manufacturer.
Includes Ingersoll branded attachment cutter, unable to read type number from wear on Cutter, see photo.

Sold Price

$133.55

View Listing
Assorted Ballnose Endmills (10 Pieces) Sold Trade Me

Sold on: 6 Sep 2020

Assorted Ballnose Endmills (10 Pieces)

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref P118125

Assorted Ballnose Endmills (10 Pieces).
9 x GARR 8x65mm HSAL 2FL BALL *ALUMA Series 1280KD.
1 x Sgs® 44574 S-carb® 47mb Ball Nose End High Performance Metric Regular Length End Mill, 8 Mm, 19 Mm Max Depth Of Cut, 2 Flutes, 8 Mm Shank, 63 Mm Oal

Sold Price

$132.50

View Listing
Spitfire DC25 Diesel/Kerosene Workshop Heater (Likely Faulty) Sold Trade Me

Sold on: 6 Sep 2020

Spitfire DC25 Diesel/Kerosene Workshop Heater (Likely Faulty)

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref W117898

Spitfire DC25 Diesel/Kerosene Workshop Heater (Likely Faulty).
Make: Spitfire
Model: DC25
Fuel Types: Diesel, Kerosene.
Power Input: 240V, 50Hz, 1Ph, 180W, 1.4A.
Heat Output: 0.34bar, 2.2kg/h, 26.00kw.
Movile unit with two wheels at front.
Unit has NOT been tested. Markings suggest unit needs to be "looked at" before functioning, note last electrical test was done 2015.
Electrical start panel has is unsecured - see photos.

Sold Price

$130

View Listing
Kennametal & SGS Branded End Mill Cutters Sold Trade Me

Sold on: 6 Sep 2020

Kennametal & SGS Branded End Mill Cutters

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref P118151

Kennametal & SGS Branded End Mill Cutters.
Includes:
- Kennametal Flat Nose end mill UGDE0750J5BE.
- SGS Ball Nose end mill 44578, 16mm.
Both units include cases.
Condition - Both end Mills appear as new, unused leftover Workshop stock. Case exteriors show wear and grime from workshop storage.

Sold Price

$129

View Listing
Gantry I-beam Trolley w/ Manual Chain Drive Sold Trade Me

Sold on: 7 Sep 2020

Gantry I-beam Trolley w/ Manual Chain Drive

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref M118564

Gantry I-beam Trolley w/ Manual Chain Drive.
No ID label on unit so manufacturer and max weight capacity is unknown.
85mm non-adjustable inner width.

Sold Price

$127

View Listing
Assorted Milling Edge Finders & Small Dead Center Units Sold Trade Me

Sold on: 7 Sep 2020

Assorted Milling Edge Finders & Small Dead Center Units

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref A118760

Assorted Milling Edge Finders & Small Dead Center Units.
9x Edge Finder shafts in lengths varying up to 58mm.
8x small Dead centre units? Diameters of these range from approx 17mm to 24mm.
See photos for further details on what is included in auction.
Condition varies with each unit. Some edge Finders are bent.

Sold Price

$127

View Listing
Kojex Z-Zero Setter Z-50 Sold Trade Me

Sold on: 7 Sep 2020

Kojex Z-Zero Setter Z-50

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref A119540

Kojex Z-Zero Setter Z-50.
Includes wood case.
Unit is operating but could use a calibration, see photo.

Sold Price

$126

View Listing
2500mm Lifting Chain Sold Trade Me

Sold on: 6 Sep 2020

2500mm Lifting Chain

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref Z118577

2500mm long Lifting Chain.
2400kg max lifting capacity.
Certification is expired.

Sold Price

$126

View Listing
6x Assorted Mill Drill Bits Sold Trade Me

Sold on: 7 Sep 2020

6x Assorted Mill Drill Bits

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref Z118187

6x Assorted Mill Drill Bits.
Includes:
- 5/8"
- 20mm
- 3x 3/4"
- 30mm
- morse Tapper adapter
Condition varies greatly with each unit. One unit has metal residue stuck to it.

Sold Price

$124.50

View Listing
Iscar Lathe Turning Tool SRGCR 2525M-12 Sold Trade Me

Sold on: 7 Sep 2020

Iscar Lathe Turning Tool SRGCR 2525M-12

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref Y118134

Iscar Lathe Turning Tool.
Part No. SRGCR 2525M-12
Includes case.
Appears unused. Case exterior shows Workshop Storage wear.

Sold Price

$123.54

View Listing
Assorted Flatnose Endmills (9 Pieces) Sold Trade Me

Sold on: 7 Sep 2020

Assorted Flatnose Endmills (9 Pieces)

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref N118123

Assorted Flatnose Endmills (9 Pieces).
7 x ITA Iscar ECA-B-3 06-16C06-57 IC08 06 dh api 6 157 23 Had 5 C r0.2.
3 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.
2 x SGS 44701 6mm SER 43M S-CARB 3FL CARBIDE ALUMINIUM CUTTER 44701 13x57.

Sold Price

$123

View Listing
Avery 250kg Industrial Analog Platform Scale Sold Trade Me

Sold on: 6 Sep 2020

Avery 250kg Industrial Analog Platform Scale

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref L117861

Avery 250kg Industrial Analog Platform Scale.
Made in England by Avery.
Type No. 3205ABA
250kg max capacity.
Weighing platform is approx 870x730mm and approx 185mm above floor.
Total unit height approx 1230mm

Sold Price

$122

View Listing
ABV Photo Tachometer Sold Trade Me

Sold on: 7 Sep 2020

ABV Photo Tachometer

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref C119542

ABV Photo Tachometer.
Model No. 70934.
Includes operation manual and case.
Use 4x AA batteries (not included).

Sold Price

$121

View Listing
30+ Assorted Hex Keys, in sizes up to 32mm Diameter Sold Trade Me

Sold on: 6 Sep 2020

30+ Assorted Hex Keys, in sizes up to 32mm Diameter

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref T119039

30+ Assorted Hex Keys, in sizes up to 32mm Diameter.
Includes assorted sizes. 2x units are 32mm diameter, 4x units are 27mm diameter, all others vary in size from 9mm to 20mm.
Condition varies greatly with each unit.

Sold Price

$121

View Listing
Cammac Arbour Press on Stand Sold Trade Me

Sold on: 6 Sep 2020

Cammac Arbour Press on Stand

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref V118729

Cammac 400KG Arbour Press on Stand.
Note this unit is missing handle and does not come with a press bench.

Sold Price

$120.05

View Listing
14x Spools of Mitchell's Abrasive Cord, Assorted Sizes Sold Trade Me

Sold on: 6 Sep 2020

14x Spools of Mitchell's Abrasive Cord, Assorted Sizes

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref P118723

14x Spools of Mitchell's Abrasive Cord, Assorted Sizes.
Assorted sizes and grits.
Condition - Most shoe exterior grime and wear from workshop usage. Most are partials with varying amounts of product remaining in each.

Sold Price

$117

View Listing
Walter Lathe Tool Holder w/ Accessories Sold Trade Me

Sold on: 7 Sep 2020

Walter Lathe Tool Holder w/ Accessories

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref L118199

Walter Lathe Tool Holder w/ Accessories.
Includes Walter branded items:
- Tool Holder Part No. MSS-E25L00-2525L with Walter attachment MSS-E25L21-GX24-2.
- Spare attachment MSS-E25L21-GX24-2 in case.
- 17x cutting inserts GX24-2E300N00-CF5.
Comdition - Tool Holder appears unused. Cases attachments and Inserts are as new in cases.

Sold Price

$116

View Listing
Portable Refractometer (RHB - 32ATC) Sold Trade Me

Sold on: 7 Sep 2020

Portable Refractometer (RHB - 32ATC)

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref H118117

Portable Refractometer (RHB - 32ATC).
High quality pure aluminum body construction.
Uses ambient light only which means battery or power source is not required.
Easy to focus and calibrate.
Cushioned with soft & comfortable non-slip rubber.
With ATC function (ATC Compensation).
Durable and built to last long.

Sold Price

$111

View Listing
2x Lengths of Lifting Chains Sold Trade Me

Sold on: 7 Sep 2020

2x Lengths of Lifting Chains

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref W118574

2x Lengths of Lifting Chains.
Both units have approx 2000mm long chain.
Both units have 1280kg limit and expired certification.
Condition varies with each unit, see photos.

Sold Price

$111

View Listing
SANDVK Sandflex VIP 3834-Set-95 Holesaw Set Sold Trade Me

Sold on: 6 Sep 2020

SANDVK Sandflex VIP 3834-Set-95 Holesaw Set

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref V119015

SANDVK Sandflex VIP 3834-Set-95 Holesaw Set.
Drill pieces: 1130 and 11152.
Circular Saw Blades: 16, 19, 22, 29, 35, 44, 52, 57 and 64mm.
Seems to be missing hex key, unsure if any other parts missing.

Sold Price

$110

View Listing
Lathe Live Centre Unit Sold Trade Me

Sold on: 7 Sep 2020

Lathe Live Centre Unit

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref L118745

Lathe Live Centre Unit.
Unknown manufacturer and model.
Slightly Tapered mounting shaft is approx 90mm in length.
Max unit diameter is approx 152mm.
Rotating centre Cone is approx 27mm diameter.

Sold Price

$109.65

View Listing
Pacific Series 2 Chain Block, 1/2 Ton Sold Trade Me

Sold on: 6 Sep 2020

Pacific Series 2 Chain Block, 1/2 Ton

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref D119543

Pacific Series 2 Chain Block.
1/2 Ton capacity.
Chain length approx 3m.
Unit shows surface grime and wear.

Sold Price

$109

View Listing
2x Lengths of Lifting Chains Sold Trade Me

Sold on: 7 Sep 2020

2x Lengths of Lifting Chains

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref U118572

2x Lengths of Lifting Chains.
Both units have approx 3000mm long chain.
One unit has 1600kg limit.
Second unit has 2000kg limit.
Both units certification good till 03/2021.
Condition varies with each unit, see photos.

Sold Price

$109

View Listing
58x Pairs of Workshop Gloves Sold Trade Me

Sold on: 7 Sep 2020

58x Pairs of Workshop Gloves

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref N119033

58x Pairs of Workshop Gloves.
Includes:
- 48x pairs of White Cotton gloves with brown wrist trim, size unknown.
- 10x Pairs of green liquid proof gloves. Nine pair are Lynn River brand type 62024, size XL. One pair is Pro EN388, 4221. Includes one extra right hand glove.
Condition - Leftover unused workshop staff stock. Some green gloves show dust/dirt from exposed storage. White gloves in plastic bags.

Sold Price

$107

View Listing
Engineering Mill Lock Down Set Sold Trade Me

Sold on: 7 Sep 2020

Engineering Mill Lock Down Set

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref Y118160

Engineering Mill Lock Down Set.
See photos for included components. Some original components appear missing. Set shows Workshop grime and wear.

Sold Price

$105

View Listing
Assorted Iscar Milling Inserts (20 Pieces) Sold Trade Me

Sold on: 6 Sep 2020

Assorted Iscar Milling Inserts (20 Pieces)

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref C118164

Assorted Iscar Milling Inserts (20 Pieces).
10x Iscar TCGT 16T308-AS IC20.
10x TNMS 332-12 IC20 160408-12 IC20

Sold Price

$105

View Listing
Safa Toolbox and Assorted Tools Sold Trade Me

Sold on: 7 Sep 2020

Safa Toolbox and Assorted Tools

SKYLARC'S CHRISTCHURCH ENGINEERING AUCTION

Skylarc Ref S119038

Safa Toolbox and Assorted Tools.
Red Safa branded tool chest.
With assorted tools, please see photos for details.

Sold Price

$103

View Listing
Show 60 240 All per page