Pair of Mill Parallels
SKYLARC'S CHRISTCHURCH ENGINEERING AUCTIONSkylarc Ref Q118594
Pair of Mill Parallels.
Unknown if a matched pair.
No ID stamps on units.
Each is approx 125x60x75mm.
Sold Price
$102.50
Auction Ended: Sunday, 6 September 2020
Showing 181–240 of 373 products
Skylarc Ref Q118594
Pair of Mill Parallels.
Unknown if a matched pair.
No ID stamps on units.
Each is approx 125x60x75mm.
Sold Price
$102.50
Skylarc Ref O118176
Assorted Ballnose Endmills (6 Pieces).
5 x GARR <28700 > VRX 10x70mm E BALL "AITIN
GARR TOOL 10x70mm VRX BALL EM
1 x EC-B3 10-22C10E72 IC900 010 010 an 22 L72 Z3 Ha45.
Sold Price
$102
Skylarc Ref O117890
Large Workbench Table.
Steel frame with timber top and sides.
Incldes a steel bracket for roller feed (cardboard/plastic roll for packaging.
Sold Price
$102
Skylarc Ref U118728
Mobile Wilden Polypropylene Discharge Pump
Wilsen 01-5230-20 Elbow Manifold.
Mounted to a sack barrow.
With hose attached.
Sold Price
$102
Skylarc Ref O119008
6x Assorted Milling Indexable Mill Cutters.
Five units have worn off ID labels so Unknown brand and model for each.
Sixth unit is an Iscar Heli2000 E90A-D20-3-C20-C.
Condition varies with each unit.
Sold Price
$101
Skylarc Ref F118141
Kennametal Lathe Tool Holder.
Part No. SRGCL 2525M12
Sold Price
$101
Skylarc Ref U118182
6x Assorted Milling End Cutter Bits.
Unknown manufacturer and specific model numbers.
16mm and 20mm Diameter varieties.
See photos for details on specific cutting shapes etc.
Condition - Appear to be unused bits with no packaging.
Sold Price
$101
Skylarc Ref Q118178
Assorted Flatnose Endmills (10 Pieces).
9 x Iscar EC-B3 16-25C16E75 IC900 D16 d16 ap25 L75 73 M45 C.
1 x Seco 553160R050Z3.0-SIRONA 16X34X090 D16 R0 5.
Sold Price
$101
Skylarc Ref A118474
BT40 Type Mill Tool Holder.
Unable to locate a brand/model mark. Suspecting that this unit may have been modified by having its shank narrowed on a lathe to make it narrower, see photos. Attachment mounting end is approx 47mm diameter.
Sold Price
$101
Skylarc Ref G118714
8x Assorted Milling Straight Tooth Cutters.
Assorted sizes, most unreadable from surface rust, see photos.
Condition varies with each unit. Most show wear and use with moderate surface rust.
Sold Price
$101
Skylarc Ref E118712
Seco Indexable Lathe Boring Bar A25S-PTFNL16
Sold Price
$100.65
Skylarc Ref G118142
Kennametal Lathe Tool Holder.
Part No. MTJNL 2525M16H4
Sold Price
$100
Skylarc Ref D118165
20 x Seco SEEX1204AFN - E08 H25 Milling Insert (Aluminum).
SEEX1204AFN-E08 ,H25
SEEX1204AFN-E08
0212535 827
Made in Sweden
QTY 10
02426793
EDP 04940
Sold Price
$100
Skylarc Ref J118743
20mm Keyed Drill Church w/ Morse Tapper Mount.
Unknown brand.
Chuck key is missing.
Jaws move smoothly.
Sold Price
$100
Skylarc Ref D118763
Wilden Air Pump Unit.
Unsure of modrl number, possibly 00-2000-20-700.
See photos for further details on type of pump.
Overall dimensions are approx 260x145x130mm.
Condition - Unit shows exterior grime and use marks. Some water still in unit.
Sold Price
$100
Skylarc Ref P119009
Assorted End Mill Cutters by Iscar.
16x total units in a variety of cuttings types, see photos.
Condition - Varies with each unit, some appear unused while others show varying levels of use. Unknown if type number marked on boxes is what is in each case.
Sold Price
$99
Skylarc Ref B118111
2 x Hydrolic Jacks.
Includes 1 x 3 Ton trolly jack (not functioning) and 1 small jack with not weight capacity or branding (functioning).
Sold Price
$98
Skylarc Ref T119013
3 x Steel Parallels.
Each Roughly: 196mm x 38mm x 68mm.
Sold Price
$95
Skylarc Ref J118483
Acrow Mill Tool Holder BT40-WER32-100.
Sold Price
$95
Skylarc Ref B118579
15x Assorted Types & Lengths of Steel Chain.
A wide assortment of chain diameters and lengths.
Lengths vary from approx 250mm up to approx 8450mm.
Sold Price
$95
Skylarc Ref P118489
Frank Phoenix Mill Tool Holder BT40 TER32.
Tension Compression TER32.
Sold Price
$94
Skylarc Ref A118578
630mm Lifting Chain w/ Lifting Ring.
Chain length approx 630mm long.
Lifting capacity 2000kg.
Certification is expired.
Includes a spare uncertified lifting ring approx 165x105x15mm.
Condition varies with each unit.
Sold Price
$94
Skylarc Ref J118535
Mill Tool Holder BT40 ER32 SHORT E.
Manufacturer unknown.
Sold Price
$93
Skylarc Ref G118480
Acrow Mill Tool Holder BT40-WER32-100.
Sold Price
$92.73
Skylarc Ref G118558
110x110mm Lathe Tool Post.
Unknown manufacturer.
Sold Price
$92.10
Skylarc Ref M117888
Self Standing Workshop Wall Unit.
Frame is made from 50x50mm hollow box Steel lengths.
Wall surfaces is 9mm thick MDF boards.
See our other listings for more of these type of units.
Sold Price
$92
Skylarc Ref N118175
Assorted Small Endmills (9 Pieces).
3 x Garr 45070 - 4mm EM SQ 2 FLUTE S/E SMG
Series 820M Standard Length 2 Flute – Square End.
2 x SGS 46853 Z-Carb-AP Z1MPCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 5 mm Dia Cutter, 0.3 mm Corner Radius, 13 mm Length of Cut, 4 Flutes, 6 mm Dia Shank, 57 mm OAL.
2 x SGS Kyocera 44551 4,0 ENDMILL 2FL SQ.
1 x SGS 46344 - SGS 46344 Z1MB Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 8 mm Cutting Diameter, 19 mm Cutting Length, 8 mm Shank Diameter, 63 mm Length
1 x Garr 27522 VRX 5x50x10 0.3mm C/R.
Sold Price
$89.50
Skylarc Ref J118119
Insize Electronic Edge Finder (6566).
Accuracy: 5µm.
Battery: Type 23AE.
Battery Voltage: 12V.
Brand: Insize.
Contact Diameter: 10 mm.
Light Type: LED.
Measurement System: Metric.
Overall Length: 160 mm.
Shank Diameter: 20 mm.
Sold Price
$89.15
Skylarc Ref A118110
10 Tonne Capacity Hydraulic Body-Frame Repair Kit.
Repair kit is missing key parts.
Usefull as spares.
Sold Price
$89
Skylarc Ref P118177
8 x GARR 8X65mm VRX Ballnose Endmills.
EDP: 28640
8X65mm VRX BALL EM *AlTiN
Series VB
4 Flute – Rougher/Finisher
Ball End
AlTiN Coated
Solid submicron grain carbide end mill – center cutting
Sold Price
$89
Skylarc Ref P118567
4x 15A Single Phase Workshop Extension Power Leads Cords.
ACPA branded.
All are 15A Single Phase.
Includes 3x 10 metre and 1x 20 metre lengths.
Condition - One unit is as new in packaging, other three show light usage.
Sold Price
$88.50
Skylarc Ref F118713
Seco Indexable Lathe Boring Bar A12N-SCLCL09.
Sold Price
$88
Skylarc Ref S119012
Press plates and Parallels
1 x 180mm x 160mm x 20mm press plate.
1 x 250mm x 200mm x 23mm press plate.
2 x 295mm x 22mm x 22mm parallels.
Sold Price
$87
Skylarc Ref T118181
34mm HSS Morse Tapper Milling Drill Bit.
Unknown manufacturer.
Drill appears as new, unused but no packaging.
Sold Price
$87
Skylarc Ref S117894
Industrial Material Storage Rack
Steel Frame 6 post/2 slot material storage rack.
Sold Price
$86
Skylarc Ref W118158
3x Assorted Indexable Mill Drill Cutters.
Includes:
- Iscar MiniTang T490 E90LN D25-3-C24-08-B-C.
- aporox 16mm diameter drill cutter with missing ID marks.
- Approx 31mn diameter drill cutter with missing ID marks.
Condition varies with each unit. All show wear and usage. Two show modifications to shank.
Sold Price
$86
Skylarc Ref O118540
Kennametal Lathe Boring Bar type A25REVEML0310M
Sold Price
$86
Skylarc Ref I117858
Pair of Heavy Duty Workshop Wall Mounted Material Support Racks.
Pair of Heavy steel box type wall mounted bars approx 50x50x2540mm.
Each has 12x slightly angled steel bars for supporting materials etc, each bar is approx 300x40mm.
Appears to be custom built so max weight capacity is unknown.
Sold Price
$86
Skylarc Ref P118515
Rego Fix Mill Tool Holder BT40/ER32X070 H.
Made in Switzerland.
Sold Price
$85
Skylarc Ref M118486
Kojex Mill Tool Holder BT40-WER32-100
Sold Price
$84
Skylarc Ref U119014
2 x Steel Parallels.
See dimensions in last photo.
Sold Price
$83
Skylarc Ref Q119010
4x Assorted Hand Operated Grease Dispensers.
Unknown what fluid types are in each unit.
Condition varies with each unit.
Sold Price
$83
Skylarc Ref Y118524
Mill Tool Holder BT40 ER32 60 E.
Unknown manufacturer.
Sold Price
$83
Skylarc Ref R118491
Assortment of Various Milling Toolings.
30 individual pieces.
Various drill bits (HSS and Carbide).
Please see photos for specifications.
Sold Price
$82
Skylarc Ref D118113
Trade Tools Optical Edge Finder/Sensor.
Model: 5992-20S 115mm.
Used in milling and lathe work.
Sold Price
$81.10
Skylarc Ref Y119018
3x Assorted Electrical Testers.
Includes:
- Anco model AM-932 clamp tester with red and black probes.
- Benning Duspol Combi tester.
- Beha Unitest Moskito tester.
Condition - Anco unit powers on, other two units need new batteries. All show moderate exterior wear and usage.
Sold Price
$81
Skylarc Ref A119020
Assorted Partial Sets of Various Vintage Tap/Die Sets and More.
2 Cases of Tap and Die Partial Set Kits.
1 Case with 5mm Go/No Go Thread Guage.
2 Cases with 14 Die Grinder bits.
Includes 3 Wooden Flat Cases and 2 Wooden Cylindrical Cases.
Please see photos dor specifications.
Sold Price
$81
Skylarc Ref K118146
Sandvik Coromant Lathe Turning Tool Holder.
Part No. STGCL 2525M16
Sold Price
$81
Skylarc Ref E118582
5x Assorted Engineering Precision Straight Edges & Rullers.
Includes the following:
- 2000mm long 80mm wide, 12mm thick steel straight edge unit, no visible branding marks.
- 1500x60x12mm Preisser Shahllineal 1500-1 DIN 874 straight edge.
- Toledo branded metal Metric and Imperial ruler, 1000mm length.
- unbranded metal imperial scale ruler, 48" long.
- Stanley branded 90 Degree straight edge unit, both metric and Imperial scales.
Condition varies with each unit.
Sold Price
$81
Skylarc Ref W118106
Pair of 1075mm Bar Clamps.
Sold Price
$80
Skylarc Ref G117856
Pair of Steel Workshop Work Saw Horses.
Steel tube frame with T-Shaped top beam.
Top beam approx 1930mm in length.
Height approx 635mm.
Condition - Units show moderate wear and residue from being used as welding supports, see photos.
Sold Price
$80
Skylarc Ref K118510
Mexin BT40 Type Mill Tool Holder.
Part No. 20-453-40-20.
Sold Price
$79
Skylarc Ref J118171
Assortment of Seco CP500 Inserts (17 Peices).
11 x Seco 16EL1.75ISO ,CP500 Inserts.
6 x Seco 16EL14W ,CP500 Inserts.
Sold Price
$78.73
Skylarc Ref E118478
Acrow Mill Tool Holder BT40-WER32-100.
Sold Price
$78
Skylarc Ref X118757
6x Pairs + 3x Loose Blocks of Mill Stepped Angle Blocks.
Five pairs are each block approx 67mm long, 60mm wide, 63mm thick.
One pair is each block approx 60mm long, 57mm wide, 57mm thick.
Includes 3x Loose individual blocks each a different size.
All show Workshop wear and usage
Sold Price
$78
Skylarc Ref Z118161
Engineering Mill Lock Down Set.
See photos for included components. Some original components appear missing. Set shows Workshop grime and wear.
Sold Price
$77.75
Skylarc Ref V118495
Enolt LL1500T LED Luminaire Industrial High Bay Light.
Make: Enolt.
Model: LL15TAN5NZ300.
The Enolt LED Twin High Bay light was designed specifically for suspended mount installations the LL1500T is fitted with one of the most efficient and reliable LED's available anywhere in the world.
22,000 Lumens.
210 Watt Input
Luminaire Efficacy 105 Lumens Per Watt.
>93% Driver Efficiency.
Cri >80.
Pf >0.975.
5,000k Colour Temp.
Sold Price
$77
Skylarc Ref K118744
16mm Keyed Drill Church w/ Morse Tapper Mount.
Unknown manufacturer.
Chuck key is missing.
Sold Price
$77
Skylarc Ref N118747
25mm & 30mm Mores Tapper Drill Bits.
Unknown manufacturers.
30mm drill bit has a Mores Tapper extension attached.
Both units show usage marks, etc.
Sold Price
$77
Skylarc Ref I118118
Insize Electronic Edge Finder (6566).
Accuracy: 5µm.
Battery: Type 23AE.
Battery Voltage: 12V.
Brand: Insize.
Contact Diameter: 10 mm.
Light Type: LED.
Measurement System: Metric.
Overall Length: 160 mm.
Shank Diameter: 20 mm.
Sold Price
$76.02